Sonstiges, Englisch, 800 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, 800 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
ISBN: 978-3-03859-918-0
Verlag: Trans Tech Publications
This book comprises the proceedings of the 9th International Symposium on Metastable, Mechanically Alloyed and Nanocrystalline Materials (ISMANAM), which was held in Seoul, South Korea, from the 8th to the 12th September 2002. The 127 selected papers, from over 28 countries, which are presented here cover recent scientific discoveries in fundamental research as well as novel engineering applications in the fields of metastable and nanocrystalline materials. Many important issues concerning bulk metallic glasses, bulk nanocrystalline materials, mechanical alloying and mechanochemistry are discussed.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
New Cu- and Ni-Based Bulk Glassy Alloys with High Strength of 2500 to 3000 MpaElectromechanical Processing of Bulk Metallic GlassesMicrostructure and Properties of Ductile Metal Particulate Reinforced Zr57Nb5Al10Cu15.4Ni12.6 Bulk Metallic Glass CompositesMicrostructural Design by Controlled Crystallization and Alloying of Zr-Cu-Ni-Al - Based Metallic GlassesInfluence of Ni and Co Additions on Supercooled Liquid Region, Devitrification Behaviour and Mechanical Properties of Cu-Zr-Ti Bulk Metallic GlassThe Effect of Nanosized Y2O3 as a Second Phase in Mechanically Alloyed Mg-Y-Cu Glass Matrix CompositesFormation of Crystalline Phase in Strip Cast Zr-Ti-Cu-Ni-Be Bulk Amorphous AlloyOxidation of Zr-TM Metallic GlassesCrystallization of Al-Ni-Ce Glass and Implications for Control of Mechanical Properties during Powder ConsolidationFormation of Quasicrystals in Zr-Ti-Nb-Cu-Ni-Al Melt-Spun and Ball-Milled Multicomponent AlloysCrystallization of ZrTiCuNiBe Bulk Metallic GlassesTime-Dependent Nucleation in Undercooled Pd43Cu27Ni10P20 MeltCycling Effect on Undercooling in Pd40Cu30Ni10P20 MeltMagnetic Properties and Magnetic Domain Structure of Nd-Fe Based Metallic GlassesFormation of Fe-Based Bulk Metallic Glasses with Low Purity Elements by Component Addition and SubstitutionChange in Thermal Expansion Coefficient of Bulk Metallic Glasses Tg Measured by Real-Time Diffraction Using High-Energy Synchrotron LightDesign and Stability of YCuNiAl Glassy MetalsDevelopment of Hafnium-Based Bulk Metallic Glasses with large Supercooled Liquid RegionsMicrostructural Characterization of Zr46.8Ti8.2Cu7.5Ni10Be27.5 Bulk GlassSimilarity between Glass Transition and Melting in Bulk Metallic GlassesPreparation and Ultrasonic Characteristics of Carbon Nanotube Reinforced Zr52.5Cu17.9Ni14.6Al10Ti5 Bulk Metallic Glass CompositesGlass Forming Ability of Bulk Chill Cast Zr55Al10Ni5Cu30 Alloy Containing La2O3 ParticlesGlass Forming Ability and Crystallization Behaviour of New Multicomponent (Ti33Zr33Hf33)60(Ni50Cu50)20Al20 Alloy Developed by Equiatomic SubstitutionGlass Forming Ability of Fe-Co Based Alloys with High and Low Boron AdditionsStudy on the High-Temperature Deformation Behavior and Formability of Zr-Based Bulk Metallic GlassEffect of ?m-ZrC Dispersoids and Nanoprecipitates on Mechanical Properties of CuZrTi Bulk GlassesInvestigation of Deformation Behavior in Bulk Amorphous Metal under High Strain Rate Using an Indentation MethodLow Frequency Internal Friction Investigation of Microstructural Transition in Nd60Al10Fe20Co10 Bulk Metallic Glass upon Continuous HeatingMolecular Dynamics Simulations of Glass Formation and Crystallization in Binary Liquid MetalsNano-Grain Formation Mechanism in Nickel, SUS304L and SUS316L Powders by HS-PM ProcessComparison of Nanocrystallization in Steels by Ball Milling and Ball Drop TestInfluence of Milling Mechanism on Synthesis of TiB2 and TiB/TiB2 CompositesStrengthening Mechanism of Zr-Based Devitrified Amorphous Nanocomposites with Quasicrystalline PhasesThermodynamic Approach to the Description of Steady-State Phase Composition of Alloys Obtained by Mechanical Alloying TechniqueA Direct View of the Self Combustion Behaviour of TiC System under MillingHindering of Martensitic Transformations by Mechanical Alloying of Fe-Mn and Fe-Ni PowdersAnalysis of the Tensile Deformation Behaviour of Nanocrystalline Metals - A Multi-Scale ApproachFinite Element Analysis of Equal Channel Angular Pressing Based on a Dislocation Density and Cell Size Evolution ModelDensification Modelling for Nanocrystalline Metallic PowdersReordering of a Ni2MnSn Heusler Alloy after Disordering in a Planetary Ball MillSynthesis and Mechanical Properties of High Strength Aluminum-Based Quasicrystalline CompositesSolid-State Synthesis of Titanium Diboride in Copper MatrixFrom Nanostructured Powders to Dense Nanostructured Materials: Mechanically Activated Powder MetallurgyFe-Ti(O,N) Composites Produced from Mechanically Alloyed PowdersMicrostructure and Mechanical Property of Nano-Structured Al-8Fe-2Mo-2V-1Zr AlloyPreparation of a Thin Film of Al / Al2O3 Using a Single Source PrecursorPartial Amorphization in B2 Type Shape Memory Alloys by Cold RollingPreparation and Properties of Hydroxyapatite Silk Fibroin Nano-Structured Dispersion by Simultaneous Ultrasonication and Mechanical AgitationSynthesis of Nanostructured WC Powders by Vapor Phase ReactionNanocomposites Produced by Mechanically Driven Decomposition of FeSn Intermetallic CompoundConsolidation of Mechanically Alloyed Aluminium Matrix Composite Powders by Severe Plastic DeformationAmorphization of Immiscible W-Cu-Pb System by Mechanical Alloying at Low TemperatureFabrication of Nanocrystalline WC Powders by Mechanical Alloying of Elemental PowdersSpray Pyrolysis Technique for Fabrication of Nano-Sized Spherical Agglomerated Oxide Powders for BatteriesMA Al3(Nb1-xZrx) Alloy Prepared with Elemental and Intermetallic PowdersEffect of Milling Parameters on Formation of Al-Cr-Zr PowdersProduction of Copper Nanopowders by Electric Explosion of Wire - Study of Their Oxidation during Storage and Heating in AirEffect of Sintering Temperature on Microstructure and Critical Current Density of Nanocrystallined MgB2 Thick Films Prepared Using very Fast Formation MethodDirect Synthesis of Lead Phosphate Thin Film with Monodispersed Pb Nanocrystals by Pulsed Laser DepositionConsolidation of the Mechanically Milled TiAl Alloys by Spark Plasma SinteringSynthesis Nanocrystalline a-PbO and ?-PbO Lead Oxides for Lead-Acid BatterySynthesis and Mechanical Properties of Nanostructured TiAl-Mn Alloys by a Thermomechanical Powder ProcessMorphology of Carbon Nanotubes Prepared on Alumina Supported Iron Catalyst by Mechanochemical TreatmentSynthesis of Nanostructured MoSi2-TiC Composite Powders by Mechanical AlloyingApplication of Nonequilibrium Methods for Neodymium Doped ?-FeSi2 Synthesis.Optimizing Milling Parameters for Refining Portland CementNanostructured Al/Al2O3 Composite Sintered by Magnetic Pulsed CompactionEvolution of Microstructure and Mechanical Properties of a Al-3Mg Alloy during Equal Channel Angular Pressing and Subsequent AnnealingNano-Scale Crystallite Size Measurement of Attrition Milled Oxide Nuclear Fuel Powders by Neutron Diffraction Line BroadeningMicrostructures of Rapidly Solidified Al-9Si-3Cu AlloyThermally Stable Amorphous Phase in Nanometer-Sized Alloy ParticlesOn the Undercooling of Aluminum Powders Produced by Uniform Droplet Spray (UDS) ProcessThe Characterization of Electroless Ni Bump for the Flip ChipPhase Composition and Structure of the Fe(100-x)C(x); x=5-25 at.% Powders after Mechanical Alloying and AnnealingIrradiation Effects in Amorphous Alloy Fe-Ni-Si-BMicrostructural Evolution in Al/AlN Composites Processed by Mechanical AlloyingFormation of HCP Solid Solution in Ni-C System by Mechanical AlloyingThermal Stability and Decomposition Process of HCP-Ni(C) Solid Solution Prepared by Mechanical AlloyingSome Features of the Mechanical Alloying in Cu-Bi and Fe-Bi SystemsEffect of Mechanical Milling Process on the Shape of W Particle in the Liquid Phase Sintering of Cu-WFormation of the Te-Rich Phase in the (Bi1-xSbx)2Te3 Alloys Prepared by MA-PDS ProcessCharacterization and Surface Stabilization of Aluminium Nano Powders Produced by Pulsed Wire Evaporation MethodFe-Co Alloy Nanoparticles Prepared by Chemical Vapor CondensationReinforced Aluminum by Graphite DispersionThermal Analysis of Mechanically Alloyed Ni-Mo PowdersStudies on Phase-Transformation Behaviour in Ag-Co System Subjected to High-Energy MillingPhase Transformations and Growth Mechanisms of Iron-Based Nanoparticles during Oxidation in AirMechanochemical Reactivity and Destruction of Metallic System in Well-Defined Stress ConditionsM?ssbauer Studies in MechanochemistryFactors Affecting the Particle Size of Powders Synthesised by Mechanochemical ProcessingStage Sequence in Mechanochemical Synthesis of Nanometric Solid Solutions in Metal SystemsMechanochemical Synthesis of TiN/TiB2 and TiN/TiSi2 Nanocomposite Powders via High Energy Ball MillingHydride Formation during Reactive Mechanical Alloying of Zr-V-Ni MixtureOn the Formation of Metal-Oxide Nanocomposites by Mechanochemical InteractionSoft-Mechanochemical Synthesis of LiMnO2 for Better Cathodes of Lithium-Ion BatteriesHydrogen Interaction with Mechanically Alloyed Magnesium-Salt Composite MaterialsRelationships between Mechanical Properties, Grain Size, and Grain Boundary Parameters in Nanomaterials Prepared by Severe Plastic Deformation, by Electrodeposition, and by Powder Metallurgy MethodsA Breakthrough via Nanocrystalline Synthesis in Structural CeramicsCoercivity Enhancement in Ball-Milled and Heat-Treated Sr-Ferrite with Iron SulphideCharacterization of Bulk Cementite Produced by Mechanical Alloying and Spark Plasma SinteringRecent Developments in Mechanochemical Synthesis of Cathode Materials for Rechargeable Lithium BatteriesEffect of Ball Milling on the Ionic Conductivity in PEO-LiX-Oxide NanocompositesStudies of the Electrochemical Properties of Nanosize Co3O4 Oxide as Anode Material for Lithium-Ion BatteriesFabrication and Mechanical Properties of Mo2B5-MoSi2 CompositesEffect of Heat Treatment on the Wear Properties of Electrodeposited Nanocrystalline Ni-P CoatingsEffect of pH on the Corrosion Behaviour of Nanocrystalline CobaltMechanical Properties of Nanocrystalline Mg-Al-Ti AlloysMicroforming of Metallic Glasses with Laser Micromachined Polyimide DiesMagnetically Soft Nanocrystalline Powders of Fe73.5Cu1Nb3Si13.5B9 Obtained by Mechanical Alloying and Ball MillingProcessing, Microstructure, and Mechanical Properties of Mechanically Alloyed Tungsten Heavy AlloyFormation of Amorphous State in Bulk Glass-Forming Fe-Based and Zr-Based Alloys by Mechanical AlloyingSuperconducting Properties of MgB2 Superconductor Doped with SiC NanopowderMicrostructure and Magnetic Properties of Spin Valve Mutilayers with Sputtering ConditionsAntiferromagnet Thickness Dependence of Top and Bottom Giant Magnetoresistance Spin Valve MultilayersMicrostructure and Mechanical Properties of a Nanostructured Al-Si-Fe Based Alloy Fabricated by a Powder MetallurgyElectrochemical Evaluation of Ni-Mo Electrodes Obtained by Mechanical AlloyingCorrosion Behaviour of Nanocrystalline Titanium Composite CoatingsEffect of Al Addition on the Microstructure and Properties of MoSi2-5Nb Prepared by Mechanical AlloyingAging Treatment and Mechanical Behavior of a Nanodispersed Al-16Si-5Fe-1Cu-0.5Mg-0.9Zr AlloyEffect of Nano-Y-ZrO2 and SiO2 Addition on the Microstructure and Critical Current Density of MgB2 SuperconductorsManganese-Ion Doped Layered Nanocrystalline Li-Co-Mn-O Powders Prepared from Sol-Gel ProcessingProduction of Magnetic Ferrite Particles Embedded in a Non-Conductive OxideNanosized Tin Microencapsulated Graphite as Anode in Lithium-Ion CellsNi-Mo Catalyst Synthesized by Mechanical AlloyingCorrosion Behavior of Al2O3-Cr CompositesCorrelation between Structure and Mechanical Properties for Nano-Crystalline Copper Prepared by Pulsed CompactionImprovement in Thermoelectric Properties by High Crystal Orientation in (Bi0.25Sb0.75)2Te3 and Bi2(Te0.9Se0.1)3
