Sonstiges, Englisch, 1800 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, 1800 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
ISBN: 978-3-03859-888-6
Verlag: Trans Tech Publications
Volume is indexed by Thomson Reuters CPCI-S (WoS).
This 3-volume set comprises the proceedings of the Eighth International Conference on Aluminium Alloys: Their Physical and Mechanical Properties. The papers present the latest viewpoints of the world's leading aluminium experts concerning the basic understanding, and application, of aluminium alloys. The proceedings cover a wide range of related topics and represent the views of both academia and industry.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Aluminium in the Rail Transportation MarketCurrent & Future Challenges for Aluminium as a Packaging MaterialStructural Use of Aluminium in the Construction IndustryThe Intelligent Design of High Strength, Creep-Resistant Aluminum AlloysA Texture Component Crystal Plasticity Finite Element Method for Physically-Based Metal Forming Simulations Including Texture UpdateThe Effect of Ti on Grain Refinement in Al-Sc AlloysStudies on the Sedimentation and Agglomeration Behavior of Al-Ti-B and Al-Ti-C Grain RefinersThe Variable Potency of TiB2 Nucleant Particles in the Grain Refinement of Aluminium by Al-Ti-B AdditionsHot Tearing during the Start-Up Phase of DC Cast Extrusion BilletsUpstream Fluid Flow Effects in Aluminium DC CastingPrediction of Internal Crack in High Strength Al-Mg-Si AlloyEffects of Ultrasonic (Cavitation) Melt Processing on the Structure Refinement and Property Improvement of Cast and Worked Aluminum AlloysHigh Speed Twin Roll Casters for Aluminum Alloy StripsDefect Formation in Twin Roll-Cast AA 3xxx and 5xxx Series Aluminium AlloysStrip Casting and Processing of Al-Mg Alloys for Automotive Structural ApplicationsMicrostructure Evolution and Mechanical Anisotropy of Strip Cast and Direct Chill Cast AA5182 Aluminum AlloyIntermetallic Phase Selection during Solidification of Al-Fe-Si(-Mg) AlloysRefinement of Recrystallized Grain Structure in Al-Mn-Mg Alloy Sheets via Strip CastingInfluence of Plasma Arc Melting on Melt Structure and Solidification Microstructure of Al-16 wt.% Si AlloyInfluence of Recycling Scrap Content and Solid Fraction on the Mechanical Properties of the New Rheocast Alloy A356Thixoforming of Normally Wrought Aluminium AlloysEffect of Mechanical Vibration on Semi-Continuous Casting of a Hypereutectic A390 Aluminum AlloySemisolid Casting of AlSi7Mg0.35 Alloy Produced by Low-Temperature PouringSilicon Spheroidization Treatment of Thixoformed Al-Si-Mg AlloysInfluence of the Microstructure on the Shearing Behaviour of Al4.5wt%Cu Alloy in the Mushy StateAluminum Based Materials Containing Low Melting and High Melting Metals Produced by Mechanical Alloying with Addition of Metal OxidesRole and Distribution of Strontium during the Dissolving and Grain Refining Process of AlSi7Mg Alloy's StructureInteraction between Rare Earth and Hydrogen in Eutectic Al-Cu MeltMicro-Mechanical Model of Hot Tearing at Triple Junctions in DC CastingModelling the Processing of Aluminium Alloys in the Semi-Solid StateAs-Cast Microstructure in VDC Cast AA 6082 BilletChange Fluidity of 1151 Alloy (Al-Cu-Mg) on Introducing of Co instead of MnContinuous Casting of Semisolid Aluminium AlloysSimulation of the Casting and Homogenization of Two 6xxx Series AlloysEffect of Atomizing Gas Pressure on Spray Formed 7075 AlloyMechanics and Dynamics Research of the Aluminum Melt Purification by FI ProcessMicrostructures and Modification Performance of Al- 10 Sr Alloy Prepared by Molten Salts Electrolysis and Direct Mixing ProcessReaction Processes in Aluminium Matrix Composites Produced by Low-Pressure InfiltrationThe Study of the Interaction at Interfaces in MMCp and MMCf Composite Materials Based on the Aluminium Alloys with SiCEffect of Sc Addition on Rapidly Solidified Al-Transition Metal AlloysFoaming of Compacted Al-TiH2 Powder MixturesLatent Heat Evolution from TiB2 Particulate Reinforced Aluminium AlloysA New Shear Method for Testing Aluminum Alloys in the Mushy StateSynthesis of TiC/Aluminum Composite by Reactive Infiltration ProcessMicrostructure of Mechanically Stirred Al-5%Cu Alloy BilletEffectiveness of Reinforcement Incorporation and Mechanical Properties of Composites Produced from Rheocast SlurriesMMC Production Method Using Dynamic Consolidation of Mechanically Alloyed Aluminum and Silicon Carbide PowdersRecrystallisation Behaviour a Commercial Pure and AlMn Aluminium Alloy after Cyclic and Monotonic TorsionStrain Path Effects on Texture Development in AluminiumControl of Through-Thickness Shear Texture by Asymmetric RollingModelling the Evolution of Microstructure and Properties during Deformation of AluminiumControl of Microstructures and Textures in High Purity Al for Advanced, High Efficiency Electrolytic CapacitorMicrostructural Control of an Al-Mg-Si Alloy Using Equal-Channel Angular PressingThe Physical Metallurgy of Recrystallization and Grain Growth in Non-Hardenable Aluminum AlloysOn the Correlation of Texture and Ridging in AA6016 Automotive AlloysThe Influence of Homogenisation Heat Treatment on Microstructure Development in Al-Mg-Mn Alloy AA5454Evolution of Cube Texture in AA3103 during Hot Deformation - Simulation Assisted AnalysisTexture Gradient Simulations and Measurements in Hot Rolled and Extruded High Strength Aluminium AlloysMaterial Testing, Constitutive Modeling and Implementation of Material Models into Hot Rolling Models for Alloy AA3103Integral Modelling of Texture Evolution in Multiple Pass Hot Rolling of Aluminium AlloysExtrusion Modeling of Solute, Eutectic and Precipitation Al AlloysHomogenization and Hot Workability of Alloy AA2014Influence of Cooling after Homogenisation and Reheating to Extrusion on Extrudability and Final Properties of AA 6063 and AA6082 AlloysThe Influence of Homogenisation Cooling Rate, Billet Preheating Temperature and Die Geometry on the T5- Properties for Three 6XXX Alloys Extruded under Industrial ConditionsAn In-Situ Study of Substructural Evolution in a Single-Phase Aluminium AlloySharpening of Cube Texture in High Purity Aluminum Foil by Two Step Partial Annealing and Light RollingChange in Microstructure during Annealing of Ultrafine Grained Aluminum Produced by ARBGrain Refinement and Texture Evolution during the Deformation of Al to Ultra-High Strains by Accumulative Roll Bonding (ARB)Effect of Heat-Treatment in Different Environments on Surface Segregation Phenomena of Lead in Aluminum-100 ppm Lead AlloyThe Shear Strain Measurement and Finite Element Modeling during Equal Channel Angular Pressing of AluminumEvolution of Texture and Microstructure during Repeated Shear Deformation in Aluminum 1100 Alloy SheetsEffect of Mn Replacement with Co on Hot-Shortness of 1151 Alloy (Al-Cu-Mg) under Preservation of Small Additions of Transition MetalsChanges in Fe and Si Solute Levels during Deformation of AA1200Texture Evolution of an AA3xxx Alloy after Different Homogenisation TreatmentsThe Effect of Precipitation on the Recrystallization Behavior of a Supersaturated, Cold Rolled AA3103 Aluminium AlloyEvolution of Texture and Microstructure in AA3004 Sheets during Continuous Confined Strip Shearing Deformation and Subsequent AnnealingHot Workability in Torsion of Al-Si-Cu-Ni-Sr AlloyComparison of Recrystallisation Behaviour of AA5052 after Hot Deformation in Reversed Torsion and in Compression/TensionThe Influence of Copper and Silicon Additions on the Extrudability and Mechanical Properties of a Series of Aluminium Alloys Based on AA6111Grain Refinement of AA7475 Based Aluminum Alloy Sheets by a Warm Rolling with Heated Rolls and its Effect on Texture and Mechanical PropertiesIsothermal Forging Modelling of Aluminium Based Metal Matrix CompositesControlling Inside Diameter of Circular Tube by ExtrusionMicrostructural Modelling of a Commercially Processed 6xxx Series Aluminium AlloyRecovery and Recrystallization Behaviour of AlMn1 - AlloysThe Influence of Grain Orientation on Recrystallization in Hot-Deformed Al-2.5%Mg (AA5052)Recrystallisation Processes in Aluminium Revealed by Gallium TreatmentModelling the Variation in Recrystallized Fraction through the Thickness of AA7050 PlateThe Effect of Initial Grain Size on Transition from Discontinuous to Continuous Recrystallization in a Highly Cold Rolled Al-Fe-Mn AlloyInhomogeneous Warm Rolling and Annealing of AA3104: Shear Texture Development and Thermal StabilityHighly Recrystallization Resistant Al-Mn-Mg Alloys Using Sc and ZrInfluence of Partial Annealing Temperature on Cube Texture in High Purity Aluminum FoilsRecrystallization Kinetics in AA1200 Alloys with Different Concentrations of Fe, Si and Ti in Solid SolutionInfluence of Continuous and Discontinuous Recrystallization on the Properties of Cold-Rolled Sheets from Aluminium AlloysOrientation Imaging Microscopy of the Shear Bands Formed in Al-5%Mg Alloys during Cold RollingA New Representation of Grain Boundary PropertiesDevelopment of New Damage Tolerant Alloys for Age-FormingEvaluation of the Effect of Cu on the Paint Bake Response of Preaged AA6xxxPrecipitation Processes in Al-4Cu-(Mg, Cd) (wt. %) AlloysAn Investigation of Dilute Al-Sc-Si AlloysDevelopment of Near-Eutectic Al-Si Casting Alloys for Piston ApplicationsCharacteristics of ?' and ?4 Precipitates in Ag-Modified Al-Zn-Mg AlloysA Statistical Model for Precipitation - Applications to Commercial Al-Mn-Mg-Fe-Si AlloysAdvanced Statistical Modelling of Processing of Aluminium AlloysAtomistic Behavior of Microalloying Elements in Phase Decomposition of Al Based AlloysThe Effect of Homogenizing on the Quench Sensitivity of 6082Micro-Macro Modelling of Microstructure and Microporosity in Al-Si-Cu AlloysAnalysis of the Intermetallic Phase Transformation Occurring during Homogenization of 6xxx Aluminum AlloysDSC Study on Mg-Si Phases in As Cast AA6xxxStudy of Intermetallic Phase Transformations in 3xxx Alloys Using Diffusion CouplesDispersoid Evolution during Homogenization of 6xxx AlloysAn Atom Probe Study of Fine Scale Structure in AlMgSi(Cu) AlloysThe Role of Trace Additions on the T1 Coarsening Behavior in Al-Li-Cu-X AlloysIsothermal and Non-Isothermal Devitrification Phase Transformations in Al-Ni-Gd Metallic GlassesMicrostructure Evolution of Twin-Roll Cast AA5xxx Alloys during Homogenisation-Like AnnealingApplication of Thermodynamic Calculation to the Aluminium Alloy Design for Semi-Solid Metal ProcessingProcessing, Structure and Mechanical Behavior of Rapidly Solidified Aluminum Alloys Containing Quasicrystalline ParticlesDesign of New Cast Aluminium Materials Using Properties of Monovariant Eutectic Transformation L ? a-Al + Mg2SiRecovery Associated with Cell Structure Evolution in an Al-0.53wt%Cu-1.0wt%Si Alloy at Low TemperaturesSc in Aluminum AlloysModeling of Precipitation Coupled with Thermodynamic CalculationsLocal Structure of Al-Sr Modifier in Liquid Al-Si AlloysThe Effect of Small Scandium Additions to AA7050 on the As-Cast and Homogenized MicrostructureStructural State and Decomposition Kinetics in Rapidly Quenched Al - Sc, Al-Mg-Sc AlloysEarly Decomposition Stages in two Al-Cu-Mg AlloysMechanisms of Age-Hardening in two Al-Cu-Mg Alloys Studied by Positron Annihilation SpectroscopySecondary Ageing in an Al-Cu-Mg Alloy with High Cu/Mg RatioOn the Role of Tin in Promoting Nucleation of the ?'Phase in Al-Cu-SnEffects of Quenched-in Excess Vacancies and Microalloying Elements on Phase Decomposition of Al-Cu-AlloysThe Effect of Cold Work on the Precipitation of O and ? ' in a Ternary Al-Cu-Mg AlloyA Microstructural Study of an Al-Cu-Mg-Zr Alloy after Hot FormingStructures and Transformations during Artificial Aging of an Industrial 7xxx-Series Al-Zn-Mg-Zr AlloyMechanisms of Phase Transformations under Ageing in the Alloys of Al-Zn-Mg-(Cu) SystemPrecipitates in a Li-Containing Al8.4Zn1.35Mg1.76Cu (wt. %) AlloyInfluence of Small Additions of Ag on the Ageing Kinetics of an Al-Zn-Mg Alloy: A Positron Annihilation StudyEvaluation of Sc-Bearing Aluminum Alloy C557 for Aerospace ApplicationsHigh Resolution Transmission Electron Microscopy Study of the Early Stages of Aging in Al-Mg-Cu AlloysStudy of the Influence of a Low Copper Addition and of an Excess of Silicon on the Precipitation Kinetics and on the Precipitation Sequence of Al-Mg2Si AlloysPrecipitation in Al-Mg-Si Alloys with Cu Additions and the Role of the Q' and Related PhasesAs-Cast Ageing of Aluminum AlloysAn Approach for Continuous Cooling Transformation (CCT) Diagrams of Aluminium AlloysPrecipitation of Dispersoids in DC-Cast 3003 AlloyAnalysis of d'Precipitation in Al-Li AlloysHRTEM Observation of Interface on GP Zones in Al-Ag AlloysControl of Secondary Precipitation to Improve the Performance of Aluminium AlloysGeSi Precipitation during Early Stages of Aging of a Ternary Al-Ge-Si AlloyClustering and Precipitation in Al-Si-Ge and Al-Si-Ge-Cu AlloysEFTEM Observation for Nano-scaled Precipitates in Aluminum AlloysHardening and Precipitation in the Al-Cu-Mg-Si Alloying SystemPrecipitation in Stretched Al-Cu-Mg Alloys with Reduced Alloying Content Studied by DSC, TEM and Atom ProbeThe Al-Cu-Fe-Mg-Si Phase Diagram in the Range of Al-Cu AlloysThe Effect of Nickel on the Structure, Mechanical and Casting Properties of Aluminium Alloy of 7075 TypeEffect of Addition of Copper and Chromium on Precipitation in Al-Mg-Si AlloysEFTEM Observation of Q' Phase in Al-Mg-Si-Cu AlloyHRTEM Observation of Precipitates in Al-Mg-Si Alloy Containing Copper at Early Stage during AgingTEM Observation of Interface in Al2O3 Particle Dispersed Al-Mg-Si Alloy Composite MaterialsEffect of Be on Phase Transformations in an A357-AlSiMg AlloyQuench Path Sensitivity of Super Purity AL-0.8%MG2Si Alloys with and without Excess SiliconCoherent Composite Phases Formation in Aged Al-Li Base AlloysInfluence of the Ageing Realization Scheme on the Phase Transformations and Properties of Commercial Aluminium AlloysMechanism of d'-Phase Formation in Al-Li and Al-Li-Mg Systems AlloysInfluence of Zn and Sn on the GP Zones Formation and the ?' Metastable Phase Precipitation in Al-Ag-Sn(Zn) AlloysYield Shear Stress Anisotropy of Al-Cu Single Crystal Containing Single Variant GP ZonesEffect of Mg Additions on the Work Hardening Behavior of Aluminum over a Wide Range of StrainThe Effect of Precipitation State on the Plastic Deformation Behaviour of AA6111 Aluminum AlloyAn Approach of Precipitate/Dislocation Interaction in Age-Hardened Al-Mg-Si Alloys: Measurement of the Strain Field around Precipitates and Related Simulation of the Dislocation PropagationA Study of the Hardening Precipitation in a 2650 Aluminium Alloy for AeronauticsThe Ageing and Thermal Recovery Behaviour of Al-Mg-Cu AlloysMicrostructural Evolution and Hardening during Controlled Thermal Processing of Al-Cu-Mg AlloysHigh Resolution Transmission Electron Microscopy Study of the Early Stages of Aging in Al-Mg-Cu AlloysEffect of Heat Treatment on Yield Point Elongation and P-L Effect in 5182 Al-Mg AlloysEffects of Texture and Arrangements of Dislocation Cell Walls on Yield Stress Anisotropy in Cold Rolled and Recovery Annealed Al-Mg Alloy SheetsDiffusion in Fine-Grained Al Alloys Having Low and High Angle Grain BoundariesEffect of Changing Homogenisation Treatment for the Alloys AA3102 and AA3103Effect of Indentation Size on Plastic Deformation Processes in an Ultrafine-Grained Al-3% Mg AlloyPlastic Instabilities during Biaxial Testing of Al-Fe-Si FoilsMicrostructure and Plastic Anisotropy in Rolled AA1200Elastic-Plastic Characterisation of Aluminium Bearing AlloysIn-Situ Strengths of Various Coarse Intermetallic Particles in Wrought Aluminum AlloysInvestigation on Mechanical Anisotropy of Strip Cast (SC) Aluminum Alloy AA5182Study of the Nanoscale Precipitation in 6056 Alloy (AlMgSi) by Conventional Transmission Electron Microscopy and TEM In-Situ Straining ExperimentsInfluence of Precipitate Free Zones on the Test Direction Dependence of Mechanical Properties of High Strength Aluminum AlloysThe Effect of Varying the Solution Treatment Temperature, Natural Aging Treatment and Artificial Aging Treatment on the Mechanical Strength of 7249 Aluminum AlloyLow Temperature Mechanical Properties of Scandium-Modified Al-Zn-Mg-Cu AlloysInfluence of High Velocity Spraying Conditions on the Microstructure and Properties of an Al-12wt%Sn-1wt%Cu AlloysEffect of Reinforcement Distribution on Failure Mechanism in Aluminum Based Metal Matrix CompositesCharacterisation and Modelling of Work Hardening in Al-Mg and Al-Mn AlloysCoherency between Al3Sc Precipitate and the Matrix in Al Alloys Containing ScOn the Effect of Thermomechanical Processing on the Mechanical Properties of 2297 PlatesMicrostructure Evolution and Hardening Behavior of 2024 Aluminum Alloy Processed by the Severe Plastic DeformationTTT and TTP Ageing Diagrams of Commercial Aluminium Alloys and Their Use for Ageing Acceleration and Properties ImprovementHigh-Pressure Gas Quenching during Age Hardening of Aluminium AlloysDiffusive Paths in 6013 (AD37) Alloy under a Single and Double AgeingChange in the Uniform Elongation and n-Value of 6061 Aluminum Alloy Sheets during Isothermal Strain AgingEffects of Alloy Composition and Quenching Rate on the Bendability in Al-Mg-Si Alloys?Influence of the Initial Ageing Condition on Microstructure and Properties of a Friction Stir Welded 6056 AlloyEffects of Sn Addition on Microstructure, Extrudability, Mechanical Properties and Machinability of a 6082 AlloyInfluence of Aging Conditions on the Microstructure and Tensile Strength of Aluminium alloy 6063Microstructure and Mechanical Properties of Cast and Wrought Al-Zn-Mg-Cu Alloys Modified with Zr and ScProperties and Rapidly Solidified Powder Alloys of the Al-Zn-Mg SystemPreliminary Research of a Li-Containing Al-Zn-Mg-Cu AlloyOn the Residual Stress Control in Aluminum Alloy 7050Mechanical Inhomogeneity of Extruded Al-Li Based ProfilesMechanical and Thermophysical Properties of Graphite/Al Composites Produced by Casting Infiltration MethodsFatigue and Fracture of Al-Si-Mg Cast Alloys Produced by Conventional and Semi-Liquid ProcessesElevated Temperature Fatigue of Al-Si Piston AlloysEffects of Damage at Eutectic and Primary Si Particles in Cast Al-Si AlloysInfluence of Environment and Load Frequency on Fatigue Crack Propagation of 1424 Al-Mg-Li AlloyOrientation Dependence of the High Cycle Fatigue Properties in a Hot-Cross Rolled Al-Li 8090 Alloy PlateCorrosion-Fatigue Interactions for High Strength Aluminium AlloysOn the Effect of Combined Thermal and Mechanical Loading on the Microstructural Evolution of an Al-Mg-Li AlloyThe Influence of Microstructure and Manganese Content in Solid Solution on the Creep Behavior of AA3003 ExtrusionBack Flow Creep Phenomena in Short Fibre Reinforced Aluminium AlloysCreep and Creep Fracture of 7010-T7351A Fracture Mechanics-Based Approach to Estimating the Fracture Stress and Strain of Cast Al-7%Si-0.3%Mg AlloysStress Triaxiality Dimple Fracture Morphology and Fractal Dimension Relations for Several Aluminum AlloysEffect of Local Melting on the HAZ Toughness of GMA Welded AA6082 and AA6005 Extrusions Containing CuModelling of Fracture Toughness in High Strength 7xxx Aluminium AlloysFracture Behaviour of 2195-T8 Aluminium Alloy PlatesEffect of Microstructure on the Cracking Resistance Characteristics of Al-Zn-Mg-Cu-Zr (1933) Wrought High-Strength AlloyExperimental Investigations of Fatigue Characteristics of AC4CH Cast Aluminum Alloys Fabricated through Rheocast and Squeeze Cast MethodsStructure Change Near Grain Boundaries Resulting from Aging-Treatment and its Effect on Fatigue Strength of an Al-1.2%Si AlloyAgeing and Fatigue Behaviour in Cast Aluminium AlloysInfluence of Precipitate Microstructures on Thermal Fatigue Properties of Al-Si-Mg Cast AlloysHigh Temperature Deformation of Al-Mg and Al-Mg-Sc AlloysDislocation Mechanisms Involved in a 150?C Creep Test of an Al(CuMg) Aluminium AlloyLong Term Exposure of Aluminium-Lithium Alloys at Low TemperaturesPhase Transformation during Long-Term Low Temperature Exposure of 1424 Al-Li-Mg AlloyToughness Level of 6061 Aluminum Alloy Added with Mn Instead of CrAcoustic Emission Behavior during Tensile Deformation and Fracture of Al-Mg-Si Base AlloysThe Fractal Dimension-Dependence of Crack Size Tolerance Index of 7000-Series Aluminum AlloysThe Influence of Processing and Microstructural Parameters on the Exfoliation Corrosion Susceptibility of 2025Electrochemical Characterisation of the Corrosion Properties of Aluminium Brazing SheetHydrogen Induced Degradation in Precipitation-Hardened Aluminum AlloysStress Corrosion Cracking of Sensitized AA5083 (Al-4.5Mg-1.0Mn)Optimum Trace Copper Levels for SCC Resistance in a Zn-Modified Al-5083 AlloyChemical Composition Profiles across Grain Boundaries in T6, T79 and T76 Tempered AA7449 AlloyEvaluation of Stress Corrosion Resistance and Corrosion Fatigue Fracture Behavior of Ultra-High-Strength P/M Al-Zn-Mg AlloyUltra-Fine Grain Sized Mechanically Alloyed Surface Layers on Aluminium AlloysPhase Stability in Wear-Induced Supersaturated Al-Ti Solid SolutionSliding Wear Behaviour of Novel AA2124 Aluminium Alloy/Ni3Al CompositesStudy of the Intergranular Corrosion Mechanism of the Aluminum Alloys with Electrochemical MethodMicrostructure Dependence of Grain Boundary Corrosion in Oriented Aluminum BicrystalsElectrochemical Characterization of Copper-Bearing Intermetallic Compounds and Localized Corrosion of Al-Cu-Mg-Mn Alloy 2024Effect of Ageing Treatment on Mechanical and Corrosion Properties of 7075 Aluminum AlloyCorrosion Behaviour of Al Fins in Heat ExchangersCorrosion Behavior of Aluminum Finstock AlloysRelationship between Hardness and Abrasive Wear for some Aluminium AlloysOptimum Welding Condition of 2017 Aluminum Similar Alloy Friction Welded JointsFriction Stir Welding of Al-Cu-Mg-Ag AlloysA Thermomechanical Analysis of the Friction Stir Welding ProcessFriction Based Welding Technology for AluminiumThe Stability of the Nugget Zone Grain Structure in AA7010 Alloy Friction Stir Welds during Solution TreatmentMicrostructural Features of Fusion Welded 2024-T351Precipitate Microstructure in the Heat-Affected Zone of Al-Zn-Mg MIG-Welds and Evolution during Post-Welding Heat TreatmentsMicrostructural Study of Laser Welds Al6056-AS12 in Relation with Hot TearingSpot Impact Welding of Sheet AluminumFlux-Free Diffusion Brazing of Aluminium-Based Materials Using Gallium (Patent Application: UK 0128623.6)Mechanisms of Erosion during Brazing of Aluminium AlloysAlloy 6022-T4E29 for Automotive Sheet ApplicationsInfluence of Machining on Residual Stresses and Properties of Superhigh Strength B96? Thin ElementsRecovery Prediction for Cold Rolled Can Body StockPermanent Aluminium Foam Cores in Castings: Casting Processes and Fabrication Conditions of Foam Filled PartsThe Characterization of Cerium Conversion Coatings Deposited on Porous Film of Anodized Aluminum by Cathodic PolarizationAssessing Formability of Sheet Metals through Advanced Tensile and Laser Speckle AnalysisSimulation for Hemming of Aluminum Sheet MetalEffects of Forming Conditions on Parallel Spinning for Circular Aluminum TubeAluminium Alloys on the Basis of Al-Cu-Mg, Lead-Free, Intended for CuttingFormability of Twin Roll Cast AA 5xxx Alloy Sheet for Automotive ApplicationsHollow Structural Members of Superplastic Aluminium Alloy by RB/SPFLow Distortion Quenching of Aluminium Alloys in Polymer MediumInfluence of Trace Addition of Ag on the Weldability of Al-Zn-Mg-Cu-Zr Base 7010 AlloyFatigue of Friction Stir Welded 2024-T351 Aluminium AlloyStrength, Corrosion and Environmentally Assisted Cracking of a 7075-T6 Friction Stir WeldTensile Strength and Fatigue Strength of 6061 Aluminum Alloy Friction Welded JointsNd: YAG Laser Beam Welding of 6013 Aluminium Alloy Sheet Using Different Filler PowdersDiffusion Modelling in Brazed Aluminium Alloy ComponentsRole of Lubricant Applying Effect in Lubrication in Aluminum CuttingSelecting of Aluminium Casting Alloys for Plasmochemical Ceramic CoatingsA New Type of Ce-Mo Based Conversion Coatings for Aluminum AlloysAdvances in Industrial Aluminium Research and DevelopmentResearch on Rare Earth in Aluminum
