Gurova | Energy Systems, Materials and Designing in Mechanical Engineering | Sonstiges | 978-3-03859-334-8 | sack.de

Sonstiges, Englisch, Band Volume 792, 700 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g

Reihe: Applied Mechanics and Materials

Gurova

Energy Systems, Materials and Designing in Mechanical Engineering


Selected, peer reviewed papers from the International Conference for Young Scientists “ELECTRICAL ENGINEERING. ELECTROTECHNOLOGY. ENERGY”, June 9-12, 2015, Novosibirsk, Russia

Sonstiges, Englisch, Band Volume 792, 700 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g

Reihe: Applied Mechanics and Materials

ISBN: 978-3-03859-334-8
Verlag: Trans Tech Publications

Collection of selected, peer reviewed papers from the International Conference for Young Scientists “ELECTRICAL ENGINEERING. ELECTROTECHNOLOGY. ENERGY”, June 9-12, 2015, Novosibirsk, Russia.
The 108 papers are grouped as follows:

Chapter 1: Electrical Machines, Electrical Drives and Electromechanical Systems;
Chapter 2: Power Electronics;
Chapter 3: Engineering of Industrial Electricity Systems;
Chapter 4: Thermoenergetics Systems;
Chapter 5: Engineering Management in Energy; Chapter 6: Electrotechnologies in Electrometallurgy;
Chapter 7: Mechatronics;
Chapter 8: Researching and Designing in Mechanical Engineering
Gurova Energy Systems, Materials and Designing in Mechanical Engineering jetzt bestellen!

Autoren/Hrsg.

Gurova, Elena

Fachgebiete

Weitere Infos & Material

Electromagnetic Induced Force Study in the Magnetoelectric Generator WindingResearch of Non-Sinusoidal Voltage in Frequency Converter of Medium Power OperationConcept of Designing Systems for Monitoring Technical State of Rolling Mill Electric DrivesInduction Traction Motor Mathematical Model to Control Thermal StateHybrid Synchronous Motor Magnetic Field AnalysisThe Comparison of Methods of Testing Enameled Wire to Mechanical StressInvestigation of Non-Stationary Processes in a Nonlinear Inductor with the Massive Magnetic Core by Structured Modeling MethodsBuilding the Structure and the Neuroemulator Angular Velocity's Learning Algorithm Selection of the Electric Drive of TVR-IM TypeTurn-to-Turn Short Circuit Diagnostic Improvement Method Based on ANN for Synchronous Generator Excitation WindingMathematical Model of Synchronous Generator without Damper Windings which is Equipped with an Automatic StabiliserIncrease Adjustment Capacity Generators for Power Supply Systems with Distributed GenerationElectromagnetic Motor with an Active Teeth-Slot Zone for Vibration TechnologiesInvestigation of Synchronization Properties of PM Machines with Fractional Slot Concentrated WindingsAdditional Torque in Multipole Permanent Magnet Machines Caused by EccentricityA Sensorless Initial Rotor Position Estimation for Permanent Magnet Synchronous MachinesDeveloping a Highly Reliable Asynchronous Motor Development with an Asymmetric Magnetic Core for Special Operating ConditionsSimulation Modelling of a Pulse Frequency-Phase DiscriminatorInduction Motor Traction Drive with Slipping ProtectionAn Analysis of the Main Factors on the Wear of Brushes for Brush-Type Motors and the Ways of Increasing their LifetimeRespecting Life Cycle Management of Electrotechnical Equipment Based on Genetic Modeling MethodsAsynchronous Motor Operation Ability Investigation with Numerical SimulationImproving Energy Efficiency of the Variable Frequency Drive of the Forced-Draught Fan with the Two-Speed Asynchronous MotorNumerical Modeling of Dynamic Processes of the Reciprocating Reversible Electrical MachineResearch of Highly Effective Magnetoelectric Disc Type Synchronous MotorDiagnosis of Inverter Drives FaultsSimulation of Voltage on Stator Winding Terminals of Induction Motor with Impaired Short-Circuit Winding of RotorVariable Frequency Control of Induction Motors for Emergency Demand ResponseThe Universal Mathematical Model of Excitation System of Synchronous MachinesResearch Characteristics of Aluminum Alloy Obtained by the Method of Rapid Crystallization in Electromagnetic FieldItinerant Phase Converter with Improved Energy PerformanceMultilevel NPC Converters in Parallel Connection for Power Conditioning SystemsStand-Alone Power Systems with IGBT InverterFrancis Turbine Modeling for Hydrounit on the Bases of the Doubly Fed Induction MachineAnalysis of Power Operational Properties Transformers with a Core of Amorphous MaterialsSubsynchronous Resonance in Independent Energo with Distributed Semiconductoring LoadAnalysing the Impact of Electrical Displacement and Leakage Currents in Transformer Insulation on Voltage Measurement AccuracyPopulation-Based Algorithms for Optimization of the Reactive Power Distribution and Selection of the Cable Cross-Section in the Power-Supply SystemsOn Methods of Investigation of Power Generator Differential Protection Behavior in Automatic ModeEquipment State Assessment System Based on Adaptive Neuro-Fuzzy Inference System (ANFIS)The Impact of Distributed Generation on Power Quality of the Electric NetworkImproving of Energy Measurements Reliability Using Weighted and Normalized Residual AnalysisProblem of Reliability, Verification of Electrical Power Systems Simulation and Ways of Solving itFixing Magnetically Operated Sealed Switches of Current Protections in Closed Electrical Pathways of Electrical Installations at 6-20 kVDevelopment of Calculation Methodology of Thermal Equivalent Circuit?s Parameters for Predicting Temperature of High Voltage Cable Lines 110 - 500 kVEfficient Ways and Means of Reliability Increase of Distribution NetworksPhasor Measurements Application in Power Systems for Accelerated Power Flow Calculations in Emergency ControlOpen Overhead Transmission LinesPeculiarity of Determination of Economic Current Density Values for 6 ? 35 kV Power Lines under Modern ConditionsInvestigation of Defect Formation Process in Transmission and Distribution EquipmentEfficiency of Using Artificial Neural Network for Short-Term Load ForecastingDecision Support System Based on the Concept of Hybrid Simulation for Dispatching Personnel of Electric Power SystemsTechnical Diagnostics of Electric Equipment with the Use of Fuzzy Logic ModelsPre-Design Study for Construction of a Wind Power Station with the Capacity of 50 MWInvestigation of the Coal Char Conversion by Thermogravimetric AnalysisLong-Term Experience of Running Operation Boilers Equipped with Furnace Working upon High-Temperature Circulating Fluidized BedCombined Cycle Gas Turbine (CCGT) with Freon Steam TurbineMethod for Selecting Quantity and Power of Diesel GeneratorsHigh-Temperature Technologies of Electric Energy Production on Steam-Turbine Power PlantsResults of Mathematical Modeling to Study the Influence of Accounting the Process Moisture on Energy Indicators of Cogeneration Steam TurbinesOptimization of Pump-Throttling Substation of Heating NetworksGrid Wind Power Plant with Compensation of Active and Reactive PowerPower Plants Process Control Improvement in EmergencyThe Analysis of an Air Condenser?s Performance in Russia's High Northern ClimateAssessment of the Impact of Sources of Funding on Project Successes Criteria of Energy SavingCross-Subsidization in Power EngineeringMechanisms of Destruction by Alternate CurrentEnergy Efficiency of Investment Projects Public and Private PartnershipsEnergy Service Contracts: Russian PracticesImpact Analysis of Excessive Fuel Consumption on Technical and Economic Performance of Coal-Fired Co-Generation UnitsAssessment of Administrative Labor Organization in Electrical EngineeringOptimal Control Mode of the Vakhsh Hydropower Reservoirs to Reduce Electricity Shortages in TajikistanElectrical Parameters of Induction System for Internal Cylindrical Surfaces being HeatingStudies of Electromagnetic Stirrer ModesOptimization of Induction Heating Regarding Typical Quality Criteria: Problem Solution Based on 2D FEM AnalysisAnalytical Analysis of Electromagnetic Processes in System "MHD Stirrer - Bath with Melt"Permanent Magnet Heater for Special ApplicationsThe Study of the Thermal Processes in an Electrode Influenced by an Electric ArcDeveloping and Testing of Improved Control System of Electric Arc Furnace Electrical RegimesInvestigation of Electrical Parameters of Interleaved Conductors' Packages in High Power Electrotechnological InstallationsMathematical Simulation of Acoustic Characteristics of Super-Power Arc Discharges in Electric Steel FurnacesDesign Optimization of Induction Heater in Planetary Reactors for Semiconductor IndustryCalculation of the Melt Surface Shape in Different Induction Crucible FurnacesEddy Current Impact Estimation in Designing Vibroisolator with 3D Electromagnetic Stiffness CompensatorCharacteristics Description of Electromagnetic Stiffness CompensatorSwitching Converters Development Systems for Electrostart Diesel Engine StartApplication of Energy Storage Devices at the Road City Transit Rolling StockWays of Decreasing Fuel Consumption in VehiclesMechanical Oscillations Simulation of an Adaptive Flexible MirrorImproved Cleaning of the Engine Cylinder from the Exhaust Gas Using the Active Ejection in the Exhaust TractEnergy-Saving Potential from Use of Heat-Reflective Screens with Solar Battery in Windows for Power Supply Systems of Buildings in Different Regions of Russia and FranceExperimental Study on Electroplastic Effect in AISI 316L Austenitic Stainless SteelEnhancing Resistance of Cables to HydrocarbonsImprovement of Electrical Insulating and Anti-Wear Properties of Composites Used in Telemetry SystemsIterative Approach in Design and Development of Vertical Axis Wind TurbinesHardening of Aluminum Alloys with Nano-Dispersed Inclusions during the Implementation of Energy-Saving Process of Self-Propagating High-Temperature Synthesis in Aluminum MeltSynthesis of MAX-Phase of Titanium Silicon Carbide (Ti3SiC2) as a Promising Electric Contact Material by SHS Pressing MethodOptical Recording of Bubble Dissolution of Diagnostic Gases in Electrical Insulating LiquidsTransport System of Viaduct TypeProbability of the Spectrums Overlap in Case of Carrier Frequency Random Shift in Asynchronous Radio System without FeedbackImproving the Operating Efficiency of Wells with Electrical Submersible Centrifugal Pump in the Fields with Hard to Recover Reserves
In Situ Studies of Molecular Self-Assembling during the Formation of Ion-Conducting Membranes for Fuel CellsInfluence of the Vehicles? Shape and Length on its Pressure Drag Value InvestigationDetermination of Internal Heat Power during the Induction Heating Based on Solution of Linear Inverse Heat Conduction ProblemThermal Annealing Effect on Active Layer Structure in All-Polymer Organic Solar CellsMetallurgy and Ancient Coins: A Multidisciplinary Research

Ed. Elena Gurova

Ihre Fragen, Wünsche oder Anmerkungen
Vorname*
Nachname*
Ihre E-Mail-Adresse*
Kundennr.
Ihre Nachricht*
Lediglich mit * gekennzeichnete Felder sind Pflichtfelder.
Wenn Sie die im Kontaktformular eingegebenen Daten durch Klick auf den nachfolgenden Button übersenden, erklären Sie sich damit einverstanden, dass wir Ihr Angaben für die Beantwortung Ihrer Anfrage verwenden. Selbstverständlich werden Ihre Daten vertraulich behandelt und nicht an Dritte weitergegeben. Sie können der Verwendung Ihrer Daten jederzeit widersprechen. Das Datenhandling bei Sack Fachmedien erklären wir Ihnen in unserer Datenschutzerklärung.