Han / Wu / Li | Special and High Performance Structural Materials | Buch | 978-3-03835-761-2 | sack.de

Buch, Englisch, 896 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1460 g

Han / Wu / Li

Special and High Performance Structural Materials


This is the proceedings of the selected papers presented at Chinese Materials Congress 2015 (CMC2015) held in Guiyang, China, July 10-14, 2015.This is the volume for Part 3 including 131 papers selected from 7 symposia of BB. Amorphous and high entropy alloys; DD. Magnesium Alloys; R. Advanced Metal Matrix Composites; S. High Temperature Structural Materials and Coating; T. High Performance Titanium Alloy; U. Powder Metallurgy; V. Pipeline and Pressure Vessel Materials

Buch, Englisch, 896 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1460 g

ISBN: 978-3-03835-761-2
Verlag: Trans Tech Publications

This is the proceedings of the selected papers presented at Chinese Materials Congress 2015 (CMC2015) held in Guiyang, China, July 10-14, 2015.This is the volume for Part 3 including 131 papers selected from 7 symposia of BB. Amorphous and high entropy alloys; DD. Magnesium Alloys; R. Advanced Metal Matrix Composites; S. High Temperature Structural Materials and Coating; T. High Performance Titanium Alloy; U. Powder Metallurgy; V. Pipeline and Pressure Vessel Materials
Han / Wu / Li Special and High Performance Structural Materials jetzt bestellen!

Autoren/Hrsg.

Han, Yafang
Wu, Ying
Li, Guangxian
Pan, Fu Sheng
Fan, Runhua
Liu, Xuefeng

Fachgebiete

Weitere Infos & Material

Preface
Chapter 1: Amorphous and High Entropy Alloys
Microstructure of Nb-Ta-V Based Hydrogen Permeation High Entropy Alloys
Analysis of Shear Banding in Zr-Based Metallic Glass under Laser Shock Peening and Bending
Fabrication and Characterization of Micro-Dent Produced by Laser Shock Peening on Zr-Based Bulk Metallic Glass
Damage Characteristics of Zr-Based Metallic Glasses under Helium Ions Irradiation
Effect of DC Pulse Patterns on Spark Plasma Sintering Process of [Fe0.8Co0.2B0.05Si0.2]96Nb4 Bulk Metallic Glass
Effect of Ta Addition on Structural Evolution and Mechanical Properties of the CoFeNi2W0.5 High Entropy Alloy
Microstructure Evolution and Hardness of AlCrFeNixMo0.2 High Entropy Alloy
Investigation of Viscosity Measurements of Molten Fe-Si-B-Nb Alloys
Effect of Annealing Treatment on the Microstructure and Magnetic Properties of FeSiBAlNi(C, Ce) High Entropy Alloys
Glass Formation and Thermal Stability of Mechanically Alloyed Al75Ni10Ti10Zr5 Amorphous Composites with Graphene Addition
Effect of Mn Contents on the Phase Transition of the High Entropy Alloy Prepared by Laser Cladding
Influence of Annealing Treatment on Microstructure and Mechanical Properties of Fe-Cu-Si-Al Amorphous Composites
Microstructure and Mechanical Properties of a New Refractory HfNbSi0.5TiVZr High Entropy Alloy
Correlation between Electrical Resistivity and the Structural Evolution of Zr-Based Bulk Amorphous Alloys
Core Losses Separation of Amorphous Alloy Core
Research on Laser Brazing Applying Al-Based Amorphous Ribbon
Liquid Phase Separation and Dual Glassy Structure Formation of Designed Zr-Ce-Co-Cu Alloys
Chapter 2: Magnesium Alloys
Tension-Compression Asymmetry in an Extruded Mg Alloy AZ31: Texture and Strain Rate Effects
Effects of Microstructures on the Tensile Properties and Corrosion Resistance of High-Purity Magnesium
Microstructure and Corrosion Behavior of Hot Compressed AZ31B Magnesium Alloy Joint
Compressive Behavior at Ambient Temperature of ZK60-xDy Magnesium Alloys
Effects of Filtration Purification and Solution Treatment on the Microstructure and Mechanical Property of AZ91D Alloy
Evolution of Microstructure and Mechanical Properties of ZK80 Mg Alloy during Net-Shape Pressing of Extruded Perform
Microstructures and Tensile Properties of Mg-6Gd-3Y-1.4Zn-0.4Zr Alloys
Influence of a Trace Alloying of Ag on the Ageing Behavior and Mechanical Properties of AZ80M Magnesium Alloys
Microstructural Evolution of a Fine-Grained Mg-Y-Nd Alloy during Superplastic Deformation
Effects of Briquette Forming Condition on the Extraction of Magnesium from Calcined Magnesite via Vacuum Aluminothermic Reduction
Effect of Heat Treatment on Microstructures and Properties of AZ40M Alloy
Dynamic Recrystallization Behavior of Mg-Gd-Y-Zr Alloy during Hot Compression
Mechanical Behavior and Microstructure Evolution of Mg-Gd-Y-Zn-Zr Alloy during Multipass Hot Compression Deformation
Effect of Solution Treatment on Corrosion Resistance of the Biodegradable NZ20K Alloy
Preparation and Characterization of As-Cast and As-Extruded Mg-1Mn-0.6Ce-3Y Alloy
Low Temperature Co-Fired ZnNb2O6 Dielectric Ceramic Doped by B2O3
Chapter 3: High Performance Titanium Alloys
Stress Induced Martensitic Transformation in Ti-1023 Alloys
Effect of ß Annealing and near ß Zone Hot Deformation on the Microstructure and Texture of TC18 Alloy
Thermal Stability and Mechanical Properties of Ti-15-3 Titanium Alloy
Microstructural Development around Crater in Commercial Pure Titanium
Cellular Automata Simulation on Dynamic Recrystallization of TA16 Alloy during Hot Deformation
Microstructural Evolution during Forging of Ti-6Al-4V Alloy
Effect of Alpha Phase Characteristics on the High Cycle Fatigue Properties of Ti-6Al-4V Alloy
Deformation Behavior of Ti-6Al-4V-0.1B Alloy Loaded under High Strain Rates
Effect of Hot Forging Strain Rate on the Microstructure and Mechanical Properties of TC4-DT Titanium Alloy
Dynamic Compression Properties of Low-Cost Ti-6Al-4V Plates
Effects of Stress-Relief Annealing on the Residual Stress and the Microstructure of TA15 Welded Joint
Microstructure and Tensile Properties of Boron-Doped Beta Titanium Alloy
Microstructure and Mechanical Properties of TiNiFe Shape Memory Alloys with Different Compositions
Influence of Shot Peening on the Surface Hardness of TC11 Titanium Alloy after High Cycle Fatigue Test
Characterization of Hot Deformation Behavior of Ti-4.5Al-3V-2Mo-2Fe Titanium Alloy
Influence of Upsetting and Drawing Times on the Microstructure and Microtexture of TC4 Titanium Alloy
Microstructure and Mechanical Properties of Powder Metallurgy Ti-22Al-24Nb-0.5Mo Alloys Joints with Electron Beam Welding
Influence of Cooling Rate on Phase Transformation of a a+ß Titanium Alloy
Hot Compressive Deformation Behavior of TC4-DT Titanium Alloy
Influence of Electric Pulse Heat Treatment on the Dynamic Mechanical Behavior of TC6 Titanium Alloy
Study on Rotating Bending Fatigue Property of Ti65 Titanium Alloy
Low Cycle Fatigue Behavior of TA29 Titanium Alloy at Different Temperatures
Prediction of High Cycle Fatigue Property of Ti-6Al-4V Alloy Using Artificial Neural Network
Effects of Aging Temperature on the Microstructure and Mechanical Properties of a Ti2AlNb Based Alloy
Effects of Cold-Rolling Reduction on Microstructure and Mechanical Properties of Ti50Zr30Nb10Ta10 Alloy
Chapter 4: Advanced Metal Mat

Eds. Yafang Han, Ying Wu, Guangxian Li, Fusheng Pan, Runhua Fan, Xuefeng Liu

Ihre Fragen, Wünsche oder Anmerkungen
Vorname*
Nachname*
Ihre E-Mail-Adresse*
Kundennr.
Ihre Nachricht*
Lediglich mit * gekennzeichnete Felder sind Pflichtfelder.
Wenn Sie die im Kontaktformular eingegebenen Daten durch Klick auf den nachfolgenden Button übersenden, erklären Sie sich damit einverstanden, dass wir Ihr Angaben für die Beantwortung Ihrer Anfrage verwenden. Selbstverständlich werden Ihre Daten vertraulich behandelt und nicht an Dritte weitergegeben. Sie können der Verwendung Ihrer Daten jederzeit widersprechen. Das Datenhandling bei Sack Fachmedien erklären wir Ihnen in unserer Datenschutzerklärung.