Sonstiges, Englisch, Band Volume 829, 950 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
Selected, peer reviewed papers from the 4th International Conference on Ultrafine Grained and Nano-Structured Materials (UFGNSM 2013), November 5-6, 2013, Tehran, Iran
Sonstiges, Englisch, Band Volume 829, 950 Seiten, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Reihe: Advanced Materials Research
ISBN: 978-3-03795-601-4
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
- Technische Wissenschaften Verfahrenstechnik | Chemieingenieurwesen | Biotechnologie Pulvertechnologische Verfahren
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Keramik, Glas, Sonstige Werkstoffe
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Biomaterialien, Nanomaterialien, Kohlenstoff
Weitere Infos & Material
Evaluating the Flow Properties of Ultrafine-Grained MaterialsHot Deformation Behavior of Ultra-Fine Grained Pure TiA Novel Severe Plastic Deformation Process for Shear Deformation and Grain Refinement of Bulk MaterialsNanocrystallization and Mechanical Properties of Rapidly Solidified Amorphous Al86Ni6Y6Ce2 (at.%) AlloyInvestigating on the Reverse Transformation of Martensite to Austenite and Pseudoelastic Behavior in Ultrafine-Grained Fe-10Ni-7Mn (wt %) Steel Processed by Heavy Cold RollingHigh Loading of SiO2 Nanoparticles to Investigate Optical and Mechanical Properties of Polyurethane Open CellThe Effect of Process Parameters on Pulsed Nd:YAG Laser Welding of Inconel 625Effect of Rubber Modification on the Morphology and Properties of Novolac NanostructuresPreparation of Shaped Carbon Nanotube Composites with Porous StructuresInterfacial Examination of Cu/Al Joints Using Ultrafine Al-Si Powder as Brazing Filler MetalMicrostructural Characterization of Nanostructured Al-Zn-Mg-Cu Alloy during Mechanical Alloying and Subsequent AnnealingEffect of Heat Treatment on Mechanical Properties of ECAPed 7075 Aluminum AlloyProduction of Nanostructured Ni-Ti-Ag Alloy by Mechanical AlloyingCharacterization and Mechanical Properties of PM Fe-Cu/SiCp AlloysThe Effect of Quenching Rate on Structure and Soft Magnetic Properties of High Bs Fe-Based Nanocrystalline AlloysFabrication of Carbon Nanotube Granules as Pd Catalyst Supports for Hydrogenation of Carbon-Carbon Triple BondEffect of Equal Channel Angular Pressing on the Microstructure and Mechanical Properties of AISI Type 304 Austenitic Stainless SteelSynthesis and Characterizations of Highly Efficient Copper Nanoparticles and their Use in Ultra Fast Catalytic Degradation of Organic DyesOptimizing Mechanical Properties of a 0.3C-1.5Si-3.5MnQuenched and Partitioned SteelPhosphorus Distribution in Electrodeposited Ni-P-Diamond Composites Influencing Structure and Mechanical PropertiesFree Volume Study of Severely Plastic Deformed Pure FeEffect of Milling Time on the Formation of NiAl Nanostructure Intermetallic Produced by the Mechanical Alloying ProcessPreparation and Characterization of Polystyrene/TiO2 Core-Shell Nanospheres via Suspension TechniqueSynthesis of Nano Alumina by a Novel Combustion MethodEffect of Annealing Heat Treatment on the Microstructural Refinement of Pure Copper by Friction Stir ProcessingTransient Liquid Phase Bonding of Alumina to Alumina via Bismuth Oxide InterlayerEffect of Heat Treatment on the Phase Transformation from SnS to Pure SnS2Low Temperature Synthesis of a Stable Compound of Magnesium Aluminum Titanate Using Microwave HeatingInfluence of Fuel and Condition in Combustion Synthesis on Properties of Copper (II) Oxide NanoparticleProcessing of Al/SiC/TiB2 Hybrid Nanostructured Composites by Underwater Shock Wave ConsolidationSynthesize and Investigation of the Catalytic Behavior of Ir/?-Al2O3 NanocatalystDevelopment of Nano-Structure Cu-Ti Alloys by Mechanical Alloying ProcessAn Investigation on the Effect of the Catalyst on Physical Properties of Silicon Oxide Nanostructures Prepared by CVD TechniqueStudy on the Wear Behavior of Ultrafine Grained 304L Stainless SteelThe Effect of Solvent on Drying Shrinkage of Novolac XerogelsSynthesis & Study of Nano Size Copper Oxide Particle via Chemical MethodModeling of Nanostructured Palladium Anode in Solid Oxide Fuel CellsA Mimetic Amorphous Active Carbon Model Using Molecular Dynamics SimulationWhy and How the Zigzag Edge of Suspended Graphene Sheet where DeformedDesign and Simulation of a Proposed Position Sensitive Nano Gas DetectorFinite Element Simulation of a Novel Nano 3D Semiconductor Detector Fabricated by Anodizing the AluminiumEfficiency Increasing of Thermoelectric Micro Generator Using Carbon Nanotube InterfaceNumerical Study of the Zinc Oxide Nanowire Geometry Effect on Nanogenerator OutputSimulation of a Gas Electron Multiplier Detector for Hard X-Ray Imaging with a Novel Nano ConverterFrequency Analysis of Nano Sandwich Structure with Nonlocal EffectMacro-to-Nano Scale Modeling the Effect of Surface Energies on Surface Melting Phenomena in Metallic NanoTubes/WiresMetal Organic Framework [Zn2(1,4-bdc)2(dabco)]n as Drug Delivery SystemPreparation of Mesoporous Silica Nanoparticles for Insulin Drug DeliveryStructural Changes in Poly(lactic acid)/Hydroxyapatite Nanocomposites by Gamma IrradiationNanosecond Pulsed Laser Heating of Colloidal Copper Nanoparticles in WaterSynthesize and Characterization of Hollow Hydroxyapatite Nanopowders with Different Morphologies: Role of Cationic and Non-Ionic SurfactantsPEG Decorated Glycine Capped Mn-Ferrite Nanoparticles Synthesized by Co-Precipitation Method for Biomedical ApplicationEvaluating the Effects of Different Plasticizers on Mechanical Properties of Starch/ Clay NanocompositesThe Effect of Ultrasound Wave on Levothyroxine Release from Chitosan NanoparticlesEvaluation Nanostructure Properties of Bioactive Glass Scaffolds for Bone Tissue EngineeringAntibacterial Properties of CdO Nano-Cubes Synthesized via Microwave MethodThe Synthesis of Methylene Blue Photosensitiser Conjugated with Gold NanoparticlesEnhanced Photoluminescence Effect of Poly(L-lactide) Biodegradable Polymer with Functionalized Carbon Nanotubes
In Vivo and In Vitro Evaluation of Poly(lactide-co-glycolide)/Bioactive Glass Nanocomposite CoatingInvestigation of HA Nanocrystallite Size Crystallographic Characterizations in NHA, BHA and HA Pure Powders and their Influence on Biodegradation of HAMechanical Properties Improvement of Porous Titanium-Bioglass Nanocomposites by Mechanical AlloyingNumerical Modeling of Functionally Graded CoatingsFabrication of CoFe/BaFe12O19 Magnetic Nanocomposite Thin Films by ElectrodepositionElectrodeposition of Gold and Polypyrrole Thin Films for Neural MicroelectrodesSintering Characterizations of Ag-Nano Film on Silicon SubstrateSynthesis of Nanostructured Zinc Oxide Thin Films by Anodic Oxidation MethodOn the Dependence of Mechanical and Tribological Properties of Sputtered Chromium Nitride Thin Films on Deposition PowerCharacterization of CIGS Thin Films Fabricated from Nanoparticles under Selenization ProcessStudy on the Hydrophobized Changes in Wettability of Sol-Gel Synthesized Nano Titanium Dioxide FilmsCharacterization of Nano-Structured Tin Oxide Film Prepared by Anodic Oxidation ProcessStudy on the Fabrication of Superhydrophobic Microporous Polypropylene Flat Membrane Using In Situ Synthesis of Modified Fluorinated Silica Nano ParticlesNano Hydroxyapatite as a Corrosion Resistant Coating of AZ31 Magnesium AlloysElectrolytic Coloring of Anodized Aluminum by CopperSynthesis of Nano Structured Membrane from Carbon Nanotube for Waste Water TreatmentThe Effect of Cu Doping on LPG Response of the SnO2 Nanostructure LayerEffect of Rapid Thermal Annealing on the Structural and Magnetic Properties of Nanostructured FePt Thin FilmsEffect of Introducing Free Gaseous Radicals of Trichlorosilane and Ammonia Precursors on Growth and Characteristics of LPCVD a-SiNx Ultra Thin FilmsEffect of Pulse Electrodeposition on Properties of Nanocrystalline Nickel CoatingsMagnetic Nanoparticles Supported Binuclear Manganese(II) Complex via Covalent Interaction: A Highly Efficient and Reusable Catalyst for the Epoxidation of CyclohexeneDirect Growth of ZnO Nanorods on Zinc Substrate via Hydrothermal MethodChallenges Regarding to Usage of Nanostructured Materials in Contemporary Building ConstructionEffects of Anodic Oxidation in Ethylene Glycol Based Electrolyte on the Corrosion Resistance and Biocompatibility of NiTi Shape Memory AlloyPhosphate-Free Protective Nanoceramic Coatings for Galvanized Steel Sheet with H2O2 AdditivePossibility of Growing Alloy Thin Film by Using Prepared Alloyed Powder in Electron Gun Deposition TechniqueEffect of Catalyst Type on Structural, Morphological, and Optical Properties of SiO2 Thin Film Applied by Sol-Gel MethodEffect of Current Density on Microstructure of Mn-Cu Thin Films via Electroplating Coating TechniqueThe Synthesis of Graphene Sheets Using Sodium Dodecyl Sulfate (SDS) as a Surfactant; An Electrochemical ProcessPolyamide Decorated Graphene Sheet as a Potential Antimicrobial Agent: Synthesis, CharacterizationFracture Toughness of TiN Coating as a Function of Interlayer ThicknessEffect of Powder Particle Size and Substrate Hardening on the Formation of Nanostructured TiC Coating on AISI-D2 Steel by Mechanical MillingMechanical Behavior and Properties of TiN/TiC Coating Using PACVDIncreasing the Performance of Machinery Tools by Super Hard Nanostructured Materials Reinforced with Nanoporous Aluminium OxideElectrochemical Behavior of S-Doped Nanostructured TiO2 Layer Synthesized with PEO Process for Photocatalytic ApplicationsThe Effect of Changing the Vapor Flux on Physical Properties of Nanocrystaline CdTe Thin Film, Prepared by Thermal Evaporation MethodInfluence of Nitrogen Gas Flow on Mechanical and Tribological Properties of Sputtered Chromium Nitride Thin FilmsEffect of SiC Nanoparticles Content and Milling Time on the Characteristics of Al/SiC Nanocomposite Powders Produced via Mechanical MillingA Study on Electrospun Nanofibrous Mats for Local Antibiotic DeliveryCharacterization of Ni-CNTs Nanocomposites Produced by Mechanical AlloyingSynthesis of Nickel/Ba-Hexaferrite Magnetic Nano-Composite via Mechanical Alloying RouteLiquid Phase Surface Treatment of Ti-6Al-4V Titanium Alloy Pre-Sprayed with TiC/Ni Using Pulsed Nd-YAG LaserMicrostructure and Mechanical Properties of Titanium Matrix Composite Reinforced by Functionalized MultiWalled Carbon NanotubePreparation of Cellulose Nanofibrils by High-Pressure Homogenizer and Zein Composite FilmsNanomagnetic Poly(vinyl alcohol) HydrogelsSynthesis and Characterisation of Hematite-Zircon Nanocomposite by Sol-Gel MethodCombustion Synthesis and Sintering of TiB2-Al2O3 Composites; Investigating the Effects of Different Al-Content as a PrecursorPreparation of NiO-Ni Nanocomposite by Using of Glutaric Acid in Neutral ConditionGrowth of Carbon Nanotube on the Ni-Mesoporous Alumina Catalysts for Use as AdsorbentSynthesis of Co/TiO2 Nanocomposite and its Use in Construction of a Sensitive and Selective Sensor for Determination of CiprofloxacinHydrogen Desorption Properties of Mechanically Alloyed MgH2-9 wt % V-1 wt% Al NanocompositeProduction of Cu-TiC Nanocomposite Using Mechanical Alloying RouteThe Effects of Reduced Graphene Oxide (rGO) on ZnO Film UV-DetectorMechanical Properties and Fracture Study of Alumina Dispersion Hardened Copper-Based Nano-Composite at Elevated TemperaturesIonic Liquid Aided Chemical Synthesis of Noble Metal Nanocomposites as Efficient NanoelectrocatalystsPreparation and Characterization of HAp/TiO2 Nanocomposite for Photocatalytic Degradation of Methyl Orange under UV-IrradiationEthanol Sensing Properties of Tin Oxide Doped Using Silver NanoparticlesDeposition of Polyaniline/Silica Nanocomposite Coating on Stainless Steel; Study of its Corrosion PropertiesElectrical and Mechanical Properties of Cu Matrix Nanocomposites Reinforced with Yttria-Stabilized Zirconia Particles Fabricated by Powder MetallurgyInvestigation of Microbial Cellulose/Cotton/Silver Nanobiocomposite as a Modern Wound DressingMechanically Activated Synthesis of Tungsten Carbide Nanoparticles from Tungsten OxideSynthesis and Modification of SAPO-34 Nanoparticles by Incorporation of Metal Ions Using Rapid High Temperature MethodTransient Liquid Phase Bonding of Al/Mg2Si Composite Using a Cu-Ni Mixed PowderThe Effect of Layer Number on the Nanostructural Ternary Mixed Oxide Containing Ti, Ru and Ir on TitaniumEmulsion Technique to Synthesize Polystyrene Incorporated with Surface Modified and Unmodified Nano-TiO2 ParticlesSynthesis of Magnetic Nanocomposite Fe3O4 Coated Polypyrrole (PPy) for Chromium(VI) RemovalNickel Oxide Coated on Pretreated MWCNTs as an Electrode for SupercapacitorDispersion of Multi Walled Carbon Nanotubes within 3 mol. % Yttria Stabilized Zirconia Based Ceramics: A Comparative Study of MethodsInvestigation of Nanoparticles of Carbon and Calcined Alumina on Mechanical and Corrosion Properties in MgO-C RefractoriesSilver Nanocolloid: Synthesis, Optical and Thermo-Optical PropertiesDetermination of Tryptophan Using Nanocomposite-Based SensorCharacterization of Nano-Structured Multiferroic Bismuth Ferrite Produced via Solid State Reaction RouteFabrication of Nanostructure Ferrite FoamThe Effect of Heat Treatment on the Magnetic Properties of Nanocrystalline Fe-Ni-Si PowdersAn Investigation of Solvent Effect on Rhombohedral/Monoclinic/Tetragonal Phase Properties of Pb(Zr0.53Ti0.47)O3 Nanoparticles Prepared via Sol-Gel MethodInvestigation on Phase Evolution in Mechanically Alloyed Nano-Structured Fe-Si SystemEffect of Barrier Layer on Fabrication of FePt Nanowires by Electrodeposition into Nanoporous Alumina TemplatesAn Investigation on Magnetic Interacting La0.6Sr0.4MnO3 NanoparticlesImprovement and Red Shift Toward Visible Spectrum of TiO2 Nanofibers through Doping by Fe2O3 and NitrogenSynthesis of Nanostructured Bismuth Ferrite by Mechano-Thermal RouteLow Temperature Synthesis of Barium Titanate Powder by a Modified Sol-Gel MethodInfluence of Deposition Voltage on Growth of ZnO Nanowires by Cathodic ElectrodepositionModified Synthesis Temperature of Ba3 Co1.7 Ni0.1 Cu0.1 Mn0.1 Fe24 O41 Z-Type Ferrite Nanoparticles Prepared by Co-Precipitation MethodRemoval of Copper from Industrial Water and Wastewater Using Magnetic Iron Oxide Nanoparticles Modified with BenzotriazoleOne-Step Synthesis of CoFe2O4 Nano-Particles by Mechanical AlloyingRemoval of Aluminum from Water and Wastewater Using Magnetic Iron Oxide NanoparticlesTemplate Assisted Growth of Zinc Oxide-Based Nanowires and Piezoelectric PropertiesManipulating the Structure and Morphology of Cobalt-Boron Nanoparticles through a Chemical ApproachInvestigation on Phase Evolution in the Processing of Nano-Crystalline Cobalt Ferrite by Solid-State Reaction RouteStudy the Effect of Nanoemissive Materials on M-Type Cathode PerformanceMicrostructural and Magnetic Properties of Nanostructured Fe65Co35 Powders Prepared by Mechanical AlloyingEffect of Mn Dopant on Lattice Parameters and Band Gap Energy of Semiconductor ZnO NanoparticlesOn the Vibrational Behavior of Piezoelectric Nano-BeamsThe Phonon Confinement Effect on the Impurity States in Cylindrical Nanowire with a Finite Confining Potential in Presence of Electric and Magnetic FieldsValidity of Molecular Dynamics Heat Transfer by Quantum MechanicsFabrication of Super Paramagnetic Nanoparticles by Sol-Gel Method for Water PurificationMolecular Dynamics Simulation of Nanocluster Formation in a Supersonic Nano Nozzle Fabricated by Anodizing the AluminumModification of Nanoclay Systems: An Approach to Stabilizing Drilling FluidsPreconcentration and Determination of Lead by Solidification of Floated Organic Drop Coupled with Nanodrop SpectrophotometryExperimental Manipulation of Gold Nano-Particles by Atomic Force Microscope and Investigating Effect of Various Working ParametersOptical Properties of Synthesized Fe3O4 Nanoparticles Doped in Nematic Liquid Crystal under Electric FieldMitigation of Fine Particles Migration in Deep Bed Filters Treated by a Nanofluid Slug: An Experimental StudyPreparation of Nano Crystalline Titanium Dioxide by Microwave Hydrothermal MethodEffect of Friction Stir Processing on Mechanical Properties of Surface Composite of Cu Reinforced with Cr ParticlesProtection of High-Tech Buildings Facades and Envelopes with One Sided Nano-CoatingsSol-Gel Synthesized Nanostructured Silica Particles for Application in Gas Transport Properties of PU-PDMS Based Mixed-Matrix MembranesComparison of Cyanide and Chloride-Hypochlorite Leaching of a Ball Milled Refractory Gold Concentrate with Ultra-Fine ParticlesApplication of Nano Silica in Concrete for Enhanced Resistance against Sulfate AttackCommercialization Strategies for Industrial Applications of Nanomaterials in Building ConstructionProduction of Ultrafine Grained API X70 Steel with Controlled RollingSynthesis and Antifungal Property of Mg Doped Zinc Oxide Nanocubes on the Glass Substrate Using Solution-Evaporation Method at Low TemperatureSynthesis of GaN Nanoparticles by DC Plasma Enhanced Chemical Vapor DepositionEffect of Nitrogen Doping on the Phase Evolution of the TiO2 NanoparticlesEffect of Fluoride Concentration and Water Content on Morphology of Titania Nanotubes in Ethylene Glycol SolutionSolvothermal Synthesis of CuInSe2 Nanostructured Powders: Comparing Open-Air with Applying Internal Imposed PressureElectrophoretic Deposition of Titania Thin Films: Influence of Deposition Time on Microstructural and Optical Properties of the CoatingsSynthesis of Hard Carbon as Anode Material for Lithium Ion Battery
