Basile Handbook of Membrane Reactors

Fundamental Materials Science, Design and Optimisation
1. Auflage 2013
ISBN: 978-0-85709-733-0
Verlag: Elsevier Science & Techn.
Format: EPUB
Kopierschutz: 6 - ePub Watermark

E-Book, Englisch, 696 Seiten

Reihe: Woodhead Publishing Series in Energy

Membrane reactors are increasingly replacing conventional separation, process and conversion technologies across a wide range of applications. Exploiting advanced membrane materials, they offer enhanced efficiency, are very adaptable and have great economic potential. There has therefore been increasing interest in membrane reactors from both the scientific and industrial communities, stimulating research and development. The two volumes of the Handbook of membrane reactors draw on this research to provide an authoritative review of this important field.Volume 1 explores fundamental materials science, design and optimisation, beginning with a review of polymeric, dense metallic and composite membranes for membrane reactors in part one. Polymeric and nanocomposite membranes for membrane reactors, inorganic membrane reactors for hydrogen production, palladium-based composite membranes and alternatives to palladium-based membranes for hydrogen separation in membrane reactors are all discussed. Part two goes on to investigate zeolite, ceramic and carbon membranes and catalysts for membrane reactors in more depth. Finally, part three explores membrane reactor modelling, simulation and optimisation, including the use of mathematical modelling, computational fluid dynamics, artificial neural networks and non-equilibrium thermodynamics to analyse varied aspects of membrane reactor design and production enhancement.With its distinguished editor and international team of expert contributors, the two volumes of the Handbook of membrane reactors provide an authoritative guide for membrane reactor researchers and materials scientists, chemical and biochemical manufacturers, industrial separations and process engineers, and academics in this field. - Considers polymeric, dense metallic and composite membranes for membrane reactors - Discusses cereamic and carbon for membrane reactors in detail - Reactor modelling, simulation and optimisation is also discussed

Autoren/Hrsg.

Basile, Angelo

Leseproben

Contributor contact details

(* = main contact)

Editor

Prof. Angelo Basile,     Institute on Membrane Technology, ITM-CNR, c/o University of Calabria, Via P. Bucci Cubo 17/C, 87030 Rende (CS), Italy and AST Engineering S.p.A., via Adolfo Ravà 30, 00142 Rome Italy. E-mail address: [e-mail]

Chapter 1

Joaquim Vital*,     REQUIMTE, CQFB, Departamento de Quìmica FCT, Universidade Nova de Lisboa, Campus da Caparica, 2829-516 Caparica, Portugal. E-mail address: [e-mail]

José M. Sousa,     Escola de Ciências da Vida e do Ambiente – Departamento de Quìmica, Universidade de Trás-os-Montes e Alto Douro, Apartado 1013, 5001-801-Vila Real Codex, Portugal. E-mail address: [e-mail]

and

Jose M. Sousa,     LEPAE – Departamento de Engenharia Quìmica, Faculdade de Engenharia da Universidade do Porto, Rua Roberto Frias S/N, 4200-465 Porto, Portugal. E-mail address: [e-mail]

Chapter 2

Prof. Angelo Basile*,     Institute on Membrane Technology, ITM-CNR, c/o University of Calabria, Via P. Bucci Cubo 17/C, 87030 Rende (CS), Italy. E-mail address: [e-mail]

Prof. Jianhua Tong,     Metallurgical and Materials Engineering, Colorado School of Mines, 1500 Illinois Street, Golden, CO 80401, USA

Prof. Pierre Millet,     Institut de Chimie Moléculaire et des Matériaux d’Orsay, UMR 8182 – Universite Paris sud, Centre d’Orsay, Bâtiment 410, 91405 Orsay Cedex, France

Chapter 3

Pietro Pinacci*,     Research on the Energetic System (RSE) S.p.A., Via Rubattino 54, 20134 Milano, Italy. E-mail address: [e-mail]

Prof. Angelo Basile,     Institute on Membrane Technology, ITM-CNR, c/o University of Calabria, Via P. Bucci Cubo 17/C, 87030 Rende (CS), Italy. E-mail address: [e-mail]

Chapter 4

Alessia Santucci and Silvano Tosti*,     Italian National Agency for New Technologies, Energy and Sustainable Economic Development (ENEA), Unità Tecnica Fusione, C.R. Frascati, Via E. Fermi 45, 00044 Frascati (RM), Italy. E-mail address: [e-mail]

Prof. Angelo Basile,     Institute on Membrane Technology, ITM-CNR, c/o University of Calabria, Via P. Bucci Cubo 17/C, 87030 Rende (CS), Italy. E-mail address: [e-mail]

Chapter 5

Annarosa Gugliuzza,     Institute on Membrane Technology, ITM-CNR, c/o University of Calabria, Via P. Bucci Cubo 17/C, 87030 Rende (CS), Italy. E-mail address: [e-mail]

Chapter 6

C. Algieri*,     Institute on Membrane Technology, ITM-CNR, c/o University of Calabria, Via P. Bucci Cubo 17/C, 87030 Rende (CS), Italy. E-mail address: [e-mail]

Dr Antonio Comite and , Prof.Gustavo Capannelli,     Dipartimento di Chimica e Chimica Industriale, Università degli Studi di Genova, Via Dodecaneso, 31, 16146 Genoa, Italy

Chapter 7

Dr X. Tan,     Department of Chemical Engineering, Tianjin Polytechnic University, 399, Bingshui West Raod, Xiqing District, Tianjin, 300397, China

Kang Li*,     Department of Chemical Engineering and Technology, Imperial College London, South Kensington, London SW7 2AZ, UK. E-mail address: [e-mail]

Chapter 8

Simon Smart* and João C. Diniz da Costa,     School of Chemical Engineering, The University of Queensland, Brisbane, Queensland 4072, Australia. E-mail address: [e-mail]

Jose M. Serra,     Instituto de Tecnologìa Quìmica, Consejo Superior de Investigaciones Cientificas, Universidad Politécnica de Valencia, Campus UPV – Building 6C av. los Naranjos s/n, E-46022 Valencia, Spain. E-mail address: [e-mail]

Shaomin Liu,     Department of Chemical Engineering, Curtin University, Perth, WA 6845, Australia. E-mail address: [e-mail]

A. Iulianelli and , Prof.Angelo Basile,     Institute on Membrane Technology, ITM-CNR, c/o University of Calabria, Via P. Bucci Cubo 17/C, 87030 Rende (CS), Italy. E-mail address: [e-mail]

Chapter 9

Simon Smart, J. Beltramini and João C. Diniz da Costa*,     School of Chemical Engineering, The University of Queensland, Brisbane, Queensland 4072, Australia. E-mail address: [e-mail]

A. Harale, S.P. Katikaneni and T. Pham,     Saudi Aramco Saudi Arabia

Chapter 10

Dr Kelly Briceño* [e-mail],     Department d’Enginyeria Quimica, Universitat Rovira i Virgili, Av. Pasos Catalans, 26, 43007 Tarragona, Spain. E-mail address: [e-mail]

Prof. Angelo Basile,     Institute on Membrane Technology, ITM-CNR, c/o University of Calabria, Via P. Bucci Cubo 17/C, 87030 Rende (CS), Italy. E-mail address: [e-mail]

Prof. Jianhua Tong,     Metallurgical & Materials Engineering, Colorado School of Mines, 1500 Illinois Street, Golden, CO 80401, USA

Dr Kenji Haraya,     National Institute of Advanced Industrial Science and Technology (AIST), Research Institute for Innovation in Sustainable Chemistry Membrane Separation Processes Group, AIST Tsukuba Central 5, Tsukuba 305-8565, Japan

Chapter 11

Mika Huuhtanen*, P.K. Seelam, T. Kolli, E. Turpeinen and R.L. Keiski,     Mass and Heat Transfer Process Laboratory, Department of Process and Environmental Engineering, P.O. Box 4300, FI-90014 University of Oulu, Finland. E-mail address: [e-mail]

Chapter 12

Marcello De Falco*,     Faculty of Engineering, University Campus Bio-Medico of Rome, via Alvaro del Portillo 21, 00128 Rome, Italy. E-mail address: [e-mail]

Prof. Angelo Basile,     Institute on Membrane Technology, ITM-CNR, c/o University of Calabria, Via P. Bucci Cubo 17/C, 87030 Rende (CS), Italy. E-mail address: [e-mail]

Chapter 13

Prof. Naotsugu Itoh*,     Department of Material and Environmental Chemistry, Utsunomiya University, 7-1-2, Yoto, Utsunomiya, 321-8585, Japan. E-mail address: [e-mail]

Prof. K. Mimura,     Engineering Solution Unit, Chiyoda Corporation, 4-6-2 Minatomirai, Nishi-ku, Yokohama 220-8765, Japan

Chapter 14

Leonardo Roses, Stefano Campanari* and Giampaolo Manzolini,     Politecnico di Milano, Dipartimento di Energia, Via Lambruschini 4, 20156 Milano, Italy. E-mail address: [e-mail]

Chapter 15

Y. Wang and Gregory L. Leslie*,     UNESCO Centre for Membrane Science and Technology, School of Chemical Engineering, University of New South Wales, Kensington 2052, Australia. E-mail address: [e-mail]

T.D....