Chandra / Tsuzaki / Matthias THERMEC 2006 Supplement

Erscheinungsjahr 2006
ISBN: 978-3-03813-154-0
Verlag: Trans Tech Publications
Format: PDF
Kopierschutz: 0 - No protection

E-Book, Englisch, 1080 Seiten

This supplement contains further selected papers from the 5th International Conference on the Processing and Manufacturing of Advanced Materials – THERMEC’2006 - held from July 4-8, 2006 in Vancouver, Canada.

Autoren/Hrsg.

Chandra, Tara

Tsuzaki, Kaneaki

Matthias, Militzer

Ravindran, Comondore

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde

Inhaltsverzeichnis

Sponsors and Committees
Preface
1. Aluminium Alloys
Fold Defects in Aluminum Alloy A356 Lost Foam Casting
Effect of Scandium Addition on Aging Behavior of 6061 Aluminum Alloy
Forging Effect of Al6061 in Casting/Forging Process
Coupled Modeling of Electromagnetic Field, Fluid Flow, Heat Transfer and Solidification during Conventional DC Casting and Low Frequency Electromagnetic Casting of 7XXX Aluminum Alloys
Alpha-Case Controlled TiAl Alloys Castings for Automotive Application
A Study on the Manufacture of Aluminum Grain Refiner by Flux Reaction
The Influence of Strain on Semi-Solid Behavior in AC4C Aluminum Alloy Billet by One Way Torsion Working
Influence of the Cooling Rate on the Iron Solubility in High Purity Aluminum Maked by the Melt Spinning Method Using the Rotating Single Roller
Casting and Extrusion of 7003 Alloy Billets Having Complete Feathery Crystal by Using Unidirectional Solidifying Process
Influence of SO2 Concentration on Initial Corrosion of Aluminum in Marine Atmosphere
Influence of Cooling Rate on the Size of the Precipitates and Thermal Characteristic of Al-Si Cast Alloys
2. Biomaterials
Bone Tissue Engineering: Natural Origination or Synthetic Polymeric Scaffolds?
Preparation and Characterisation of New Titanium Based Alloys for Orthopaedic and Dental Applications
Engineering Biomaterials Surfaces Using Micropatterning
Atomic Force and Confocal Microscopic Studies of Collagen-Cell-Based Scaffolds for Vascular Tissue Engineering
Surface Modification of TiZr Alloy for Biomedical Application
Real-Time PCR Quantification of Protein Expression in Skin Equivalent Monoculture and Coculture Model
Tissue Engineering of Vascular Graft
Development of Degradable Fe-35Mn Alloy for Biomedical Application
Degradation Behaviour of Metallic Biomaterials for Degradable Stents
Evaluation of the Adhesion of Ultra-Thin Teflon-Like Films Deposited by Plasma on 316L Stainless Steel for Long-Term Stable Drug-Eluting Stents
A New Technique of Titanium and Segmented Polyurethane Complex through 3-(Trimethoxysilyl) Propylmethacrylate for Artificial Implants
3. Surface Engineering/Coatings
Selective Oxidation during the Austenitic Annealing of a CMnSi Steel
Microstructure and Properties of Laser Fused Nickel Based Self Fluxing Alloy Coating
Micro- and Nanoscaled Titanium Surface Structures Textured by Electrolytic Plasma and Etching Methods
Low Temperature Crystallization and Structural Modification of Plasma-Sprayed Hydroxyapatite Coating with Hydrothermal Treatment
Microstrain Determination in Individual Grains of Laser Deposited Cladding Layers
Analysis of the Intermetallic Compound Formed in Hot Dip Aluminized Steel
Pitting Corrosion of TiN Coated Dental Cast Alloy with Casting Methods
Study of Indium Oxide Rod-Like Structures Synthesized Using Metalorganic Chemical Vapor Deposition
Solid Free-Form Fabrication of Metallic Components
Interfacial Reaction and Bump Shear Property of Electroplated Sn-37Pb Solder Bump with Ni under Bump Metallization during Multiple Reflows
The Study of Immobilization Thermal-Sensitive Hydrogel onto ePTFE Film Use the Cold Plasma and Photo-Grafting Technique
Laser Alloying with WC Ceramic Powder in Hot Work Tool Steel Using a High Power Diode Laser (HPDL)
Cavitation Erosion Resistance of WC-Cr-Co and Cr3C2-NiCr Coatings Prepared by HVOF
Immobilization of Poly(Ethylene Glycol) Terminated with Amine to Titanium Surface by Electrodeposition
4. Composites
Fabrication Process of Carbonaceous Fiber Reinforced Al and/or Mg Alloy(s) Composites by Squeeze Casting
Properties of Cu-TiB2 Composites Fabricated by In-Situ Liquid Melt Mixing Process
Study of Waste Plastics as Composites Material in Cement Concrete Construction
Nanostructured TiC1-X - TiB2 Composites Obtained by Metastability Processing
(TiB+TiC) Hybrid Titanium Matrix Composites Shot Sleeve for Aluminum Alloys Diecasting
Fabrication of MgB2/Al Composite Material
Microstructures and Mechanical Properties of Al/Al2O3 Cermet Composites Reinforced by Al/Al2O3 Core-Shell Particles
Refine Yttria Powder and Fabrication of Transparent Yb,Cr:YAG Ceramics
Influences of Strontium Addition and Whisker Content on Solidification Behavior of SiCw/Al-18Si Metal Matrix Composites
Room-Temperature Deformation Behavior in the Localized Regions W-80vol%Cu Composite
5. Hydrogen & Fuel Cells Technologies
Fabrication and Microanalysis of Nano-Structured CuOX-CeO2 Catalysts for CO Oxidation Reaction
Physicochemical Transport Properties of Aqueous Sodium Metaborate Solutions for Sodium Borohydride Hydrogen Generation and Storage and Fuel Cell Applications
Hydrogen Detection by a GaAs-Based Transistor with a Palladium (Pd) Thin Film Gate Structure
Temperature Distribution within a Compressed Gas Cylinder during Fast Filling
A New Technique for the Rapid Manufacturing of Direct-Oxidation Anodes for SOFC's
Processing of Ce1-xGdxO2-d (GDC) Thin Films from Precursors for Application in Solid Oxide Fuel Cells
Air Plasma Spraying of LSM/YSZ SOFC Composite Cathodes
Effect of Water Vapor in Air on the Oxidation Behavior of Ferritic Stainless Steels for SOFC Interconnects
Water Transport through Proton Exchange Membranes
Evaluation of the Fe(III)/Fe(II) Redox Fuel Cell Cathode Couple in a Bioelectrolytic Solution
The Analysis and Design of Microchannel Reactors
Preparation of Fast Proton-Conducting Phosphate Glass-Derived Hydrogels and their Electrochemical Properties
6. Friction Stir Processing
Friction-Stir Welding and Surface-Friction Welding of Twin-Roll Strip Cast ZMA611 Mg Alloy
Analysis of Complex Heat Flow Phenomena with Friction Stir Welding Using 3D-Analytical Model
Joint Characteristics of Spot Friction Stir Welded 5052 Al Alloy Sheet
Process Modelling of Friction Stir Welding for Aerospace Aluminium Alloys
Linear Friction Welding of IN-718 Process Optimization and Microstructure Evolution
Two Pass FSW Joint of Magnesium Alloy
Friction Stir Processing of Cast Mg-Y-Zn Alloy
Allowance of Deviation and Gap in Butt Joint on Friction Stir Welding
Dissimilar Metal Welding of Steel to Al-Mg Alloy by Spot Resistance Welding
On Mg-Al-Zn Intermetallic Alloys Made by Friction Stir Processing Containing Quasi-Crystals or Amorphous Phases
Dissimilar Metal Joining of Magnesium Alloy to Steel by FSW
7. Intermetallics
High Temperature Corrosion of Al3Ti-Cr Intermetallics in SO2 Atmosphere
Annealing Effect on the Thermoelectric Properties of Hot Extruded Bi2(Te0.94Se0.06)3+0.07wt%I+0.03wt%CuBr+0.02wt%Te Compound
High Temperature Stability of Bulk Ti3AlC2 Materials in Air
Porous Metals Produced by Spacer Method as Ecomaterials
Sound Absorption Behavior of Porous Al Produced by Spacer Method
Fabrication Methods and Properties of Open and Closed Cell Foams
Solidification Behavior of Fe-Base Amorphous Alloys during Twin-Roll Strip Casting
8. Magnesium Alloys
Longitudinal Seam Failure in Extruded AZ31 Alloy
HRTEM Observation of the Age Hardening Precipitates in Mg-15wt%Gd-Zr Alloy
Corrosion Behavior of Die-Cast and Thixocast AXJ530 Magnesium Alloy in Chloride Medium
Porosity, Damage Evolution and Fracture in Die-Cast Magnesium Alloy AM60B
High Temperature Deformation Behavior of Strip-Cast AZ31 Mg Alloy
Low Temperature Superplasticity of Fine-Grained Magnesium Alloy AZ31
Effect of Chrome-Free Chemical Conversion Coating on Corrosion Behavior of Magnesium Alloy AZ91D
Low Frequency Damping Behaviors of Magnesium Alloys
Research on Water Based Coating for Magnesium Alloy
Influence of Heat Treatment on Structure and Properties of the Cast Magnesium Alloys
Influence of Additions Sb on Mechanical Properties and Deformation Features of AZ31-Mg Alloy
Hot Cracking Susceptibility of Ternary Mg-Al-Ca Alloys
Constitutive Analysis for Superplasic Deformation Behavior of AZ31 Magnesium Alloy
Experimental Study of In-Line Heat Treatment for Twin Roll Casting of Magnesium Alloy AZ31
9. Modelling
Modeling Relations between Processing, Microstructure and Mechanical Properties of Porous Bioceramics
Modeling and Sensitivity Study of the Induction Hardening Process
Modelling Chi-Phase Precipitation in High Molybdenum Stainless Steels
Block Treatment of Multi-Layer Wafers for the Development of a Numerical Model of a 300mm Batch Heat Treatment Furnace
Numerical Modelling of Isothermal Solidification Time during Rolling -Diffusion Bonding Process
10. Nanomaterials & Powder Metallurgy
Preparation of Nanocrystalline Inorganic Materials by Impulse Plasma in Liquid
Morphological Effect of CeO2 Nanoparticles on Catalysis of CO Oxidation
Preparation and Characterization of Bimetallic Nanoparticles Ptx-Pd1-x Supported on Silica
Thermal Stability of Nano Grain Structure Tungsten Prepared by SPD-PM Process
Production of Silver Coated Copper Powders by Electroless Plating Method
Microstructure and Mechanical Properties of Solid-Phase Sintered Heavy Tungsten Alloy
Preparation of Size and Aggregation Controlled Nickel Oxalate Dihydrate Particles from Nickel Hydroxide
11. Intelligent Smart Materials & Processes
Thermoelectric Properties of Ni-Doped CoSb3 Prepared by Encapsulated Induction Melting
A Study on the Fabrication of Metal Fiber by Fine Melt Extraction Process
Deformation Characteristics of Epoxy Compounds for Semiconductor Integrated Circuits
Solid-State Interaction between Ni and Cu for Ternary Compound Growth in Ni/Sn/Cu Diffusion Couple
Effects of Constitutive Parameters on Thickness of Phase Transformed Adiabatic Shear Band for Ductile Metal Based on Johnson-Cook and Gradient Plasticity Models
Evolution of Interphase Stress in Zr-2.5%Nb during Deformation
Microstructures of Rapidly Solidified Pb-Sb-Sn-Alloys
Effect of Technological Parameters on the Profile Extrusion Process
Board-Level Reliability of Pb-Free Surface Mounted Assemblies during Thermal Shock Testing
Crystal-Grain Refinement of Materials under an Ultra-Strong Gravitational Field
On the Physical Meaning of the Hall-Petch Constant
Microstructural Evolution and Recrystallization Behavior in Copper Multi-Directionally Forged at 77 K
On the Forming of Metallic Parts through Electromagnetic and Electrohydraulic Processing
The Effect of Grain Size and Amount of ß Phase on the Properties of Back-Torsion Working in 60/40 Brass
HRTEM Study of a-Phase in Cu-Zn-Si Alloy
Numerical Simulation of Microstructural Evolution in Isothermally-Aged Cu-Ni Based Alloys
Phase Decomposition in Isothermally Aged MA Cu-Ni-Fe and Cu-Ni-Cr Alloys
12. Steels
Microstructure Evaluation of High Chromium Ferritic Steels Based on Hydrogen Desorption Profile Analysis
Estimation of the System Free Energy of the Lath Martensite Phase in High Cr Ferritic Steels
Mechanical Alloying and Properties of ODS Ferritic Steels
EBSD Phase Identification and Modeling of Precipitate Formation in HP Alloys
Hot Deformation Analysis of a 2 wt.-% Si Electrical Steel by Means of Torsion Tests
A Model for Particle Dissolution and Precipitation in HSLA Steels
Transformation Plasticity in 42CD4 Steel
Effects of Cooling Rate and Direct Hot Deformation Conditions after Solidification on the Austenitic Microstructure Evolved by Simulated Strip Casting and Thin Slab Casting Processes in HSLA Steels
Tertiary Scale Behaviour during Finishing Hot Rolling of Steel Flat Products
Transient Cooling of a Hot Steel Plate by an Inclined Bottom Jet
Physically Based Model for Static and Dynamic Behaviour of TRIP Steel
Formation of Ultrafine Grained Low Carbon Steels via Martensite Deformation and Annealing
Lotus-Type Porous Nickel-Free Stainless Steel with High Temperature Nitriding
Selective Oxidation of Manganese and Chromium during Annealing of Low Carbon Strip Steels
Enhancing Surface Properties of Fine Grain Duplex Stainless Steel via Superplastic Carburizing
Deformation Behaviour of Martensite in a Low-Carbon Dual-Phase Steel
Effect of Second Phase on Mechanical Properties of Bainite-Base Steels
Effects of Thermo-Mechanical Process on the Microstructure and Mechanical Properties of Low Carbon HSLA Steels
Oxide Scales Grown on Stainless Steels during Simulated Reheat
Original Position Statistic Distribution Analysis for Al Inclusion in Continuous-Casting Thin Slab
Fatigue Strength and Fracture Mechanisms of IF28 Steels
Correlation Analysis of MnS Inclusion Composition Using Original Position Statistic Distribution Analysis
Hydrogen Absorption and Desorption in Steel by Electrolytic Charging
Study of the Deformation Mechanisms of TWIP Steels (Fe-Mn-C) by X-Ray Diffraction
Propertie