Chandra / Tsuzaki / Matthias THERMEC 2006

Erscheinungsjahr 2007
ISBN: 978-3-03813-108-3
Verlag: Trans Tech Publications
Format: PDF
Kopierschutz: 0 - No protection

E-Book, Englisch, 5180 Seiten

The present set of volumes comprises selected papers from the 5th International Conference on the Processing and Manufacturing of Advanced Materials – THERMEC’2006 - held from July 4-8, 2006 in Vancouver, Canada.

Autoren/Hrsg.

Chandra, Tara

Tsuzaki, Kaneaki

Matthias, Militzer

Ravindran, Comondore

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde

Inhaltsverzeichnis

Sponsors and Committees
Preface
Keynotes
Compelling Global Issues in Science and Technology and the Role of Materials Science
Strong Ferritic-Steel Welds
Effects of Alloying on Deformation Behavior of Low Carbon Steels in the Intercritical Temperature Range
Materials Engineering for Solid Oxide Fuel Cell Technology
Optimization of Nb HSLA Microstructure Using Advanced Thermomechanical Processing in a CSP Plant
Development of New Actuators for Flapping Wing Flight
Microstructural Design for Advanced Structural Steels
New Materials and Construction Methods for Multi-Material-Design, Lightweight Construction and Modularity in Future Vehicle Concepts
Carbon, Nitrogen and Hydrogen in Steel: Similarities and Differences in their Effect on Structure and Properties
Multi-Scale Numerical-Experimental Analysis of Failure in Solder Alloys
Developments of Fuel Cell and Hydrogen Technology at NRC's Institute for Fuel Cell Innovation
Microstructural Evolution in the Processing of Bulk Samples Using High-Pressure Torsion
Microstructure and Texture of Zirconium and Titanium Grain Refined by Equal Channel Angular Pressing
Syntheses and Applications of Fe-, Co-, Ni- and Cu-Based Bulk Glassy Alloys
The Strain Dependence of Post-Deformation Softening during the Hot Compression of 304H Stainless Steel
Development of a Magnesium Recycling Alloy Based on AM50
Current Research Activities on High Nitrogen Steel in Japan
Microstructure and Mechanical Properties of Twin-Roll Strip Cast Mg Alloys
Strength and Fracture of Aluminium Alloys
Manufacturing and Oxidation Behavior of Silicide-Based Nanocomposite Coatings on Refractory Metals by Displacement Reaction
Mechanical Properties of a Spray-Cast Aluminum Alloy Processed by Severe Plastic Deformation
Changes in Lattice Constants and Orientation of and Grains in Nanocrystalline Ni and Ni-Fe Electrodeposits after Annealing
Formation of (Ferrite+Cementite) Microduplex Structure by Warm Deformation in High Carbon Steels
Laparoscopic Surgical Manipulations Affect the Mechanical Properties and the Microstructure of Polymeric Sutures
Development of Aluminium Alloys with Ultimate Recrystallisation Resistance
Multifunctional Ti-Si-B-C-N Tribological Nanocomposite Coatings for Aerospace Applications
Computational Welding Mechanics and Concept of Inherent Strain for Industrial Applications
Fabrication of Lotus-Type Porous Metals by Continuous Zone Melting and Continuous Casting Techniques
Recent Research and Development in Metallic Materials for Biomedical, Dental and Healthcare Products Applications
On the Size of Representative Volume Element in Elastic, Plastic, Thermoelastic and Permeable Random Microstructures
Understanding Process and Property Relationships in Aluminum Alloy Friction Stir Welds
The c/a Ratio in Quenched Fe-C and Fe-N Steels - A Heuristic Story
High Temperature Oxidation of Steel; New Description of Structure and Properties of Oxide
Effect of Dislocation Distribution on the Yielding of Highly Dislocated Iron
A Neutron Scattering Study on Microstructure and Deformation Behavior in Nitrogen Bearing Austenitic Steels
Thermal Applications of Cellular Lattice Structures
Current Status and Next Generation Advances in Fuel Cell Research and Development
Creep Data Rationalization for Power Plant Steels
Research and Development of Inconel 718 Type Superalloy
Deformation Mechanisms of Nanocrystalline Materials
Aluminum & Aluminum Alloys
Solute and Second Phase Evolution during Industrial Processing of AA3103
Application of Local Tomography Technique to High-Resolution Synchrotron X-Ray Imaging
Change of Young's Modulus of Cold-Deformed Aluminum AA 1050 and of AA 2024 (T65): A Comparative Study
The Effect of Chemistry and Cooling Rate on the Latent Heat Released during the Solidification of the 3XX Series of Aluminum Alloys
Behavior of Hydrogen in Al-4%Mg Alloys during Heat Treatment
Phase Transformation for Primary Particles in the Surface Regions of an AA1200 Alloy
Tailoring the Mechanical Properties of Al-Sn-Alloys for Tribological Applications
New Application of Electromagnetic Vibration Process for Creation of High Potential Metallic Materials
The Effect of Electromagnetic Vibration on the Structure Control of A356 Alloy
Increase of Lankford Value of Al-Mg-Si Sheets for Automotive Panel Produced by Asymmetric Warm Rolling
Methodology for Automatic Control of Automotive Al-Si Cast Components
Reversion Treatment to Improve Bake Hardening Response of a Twin-Roll Cast 6016 Automotive Sheet
New Analyses of Pressure Filtration Curves of Al Alloys: A Case Study
Superplastic Properties of a Newly Developed Al-Mg-High Mn Aluminum Alloy Sheet
In-Situ SEM/EBSP Analysis during Annealing in a Pure Aluminum Foil for Capacitor
Damage Mechanisms of 5A06 Al Alloy Weld Joints under Constant Load and Thermal Cycling Condition
Projection of Extrusion Force of Spray-Formed Al-25wt%Si with High Temperature Compression
Effect of Fe Content on Hot Tearing of High-Strength Al-Mg-Si Alloy
Modelling Dispersoid Precipitation in Scandium Containing Aluminium Alloys
Alloying with Silicon and Copper in Aluminum Alloys
A Study of Bubble Entrainment as Related to Runner Velocity in Aluminum Sand Castings Using the Cosworth Process
Surface Treatment of Aluminum Alloy with Laser Irradition to Increase Wear Resistance
Evaluation of Friction Spot Joining Weldability of Al Alloys for Automotive
Atomic Bonding of Precipitate and Properties of Al-Cu-Mg Alloy
Robust Trimming of Automotive Panels
Ultrasonic Leak Test for Automotive Brake Caliper
Influence of Vacancy Formation and Mg Migration on Cracking in Spot Welding AA5754 Alloys
Ageing Characteristics and Microstructural Evolution in Microalloyed Al Alloys
Microstructural Aspects by Electron Microscopy Observed in Al-Mg Based Alloys after Special P/M Processes
Microsegregation Effect of Copper in Solidification of A356 Alloy
Control of the Alloying Element Distribution in Al-Alloys by High Magnetic Fields
The Influence of 0.1% Sc Addition on the Microstructure and Texture Development in Al-Zn-Mg-Cu-Zr Alloys
Substructures and Fatigue Crack Growth in HIPing and Semi-Liquid Die Casting A356 Alloys
Behavior Analysis of Environmental Hydrogen in High-Magnesium Al-Mg Alloys by Hydrogen Microprint Technique
Effect of Mn Addition on the Mechanical Properties in Al-Cu-Li-Mg-Ag-Zr Alloys
Structure and Properties of AlMg3 Alloy with Sc and Zr
Structure Development during ECAP and Subsequent Creep of Aluminium
The Continuous Elimination of Inclusions in Molten Aluminum by Direct and Alternate Electromagnetic Force
Biomaterials
Nanostructured Shape Memory Alloys for Biomedical Applications
Nanotechnology: Better Materials for All Implants
Cellular Activity and Biomaterial's Surface Topography
A Prototype Continuous Flow Polymerase Chain Reaction LTCC Device
Plasma and Electrospray Deposition to Improve the Biocompatibility of Stents
An Injectable Biomaterial for Bone Repair
Evaluating the In Vitro and In Vivo Efficacy of Nano-Dimensional Polymeric Scaffolds for Bladder Tissue Replacement Applications
Soft Tissue Ingrowth in Metal Rods with Varying Surface Textures and its Clinical Significance
Biofunctional Materials for Nerve Regeneration
Calcium Phosphate Films Coated on Titanium by RF Magnetron Sputtering for Medical Applications
Mechanical Properties and Microstructures of Beta-Type Titanium Alloy for Biomedical Applications
Biofunctional Hybrid of Titanium with Polymers
Gamma-Poly(glutamic acid)/Chitosan Composite Scaffolds for Tissue Engineering Applications
Degradation Studies of Some Polymeric Biomaterials: Polypropylene (PP) and Polyvinylidene Difluoride (PVDF)
Chitosan Polyelectrolyte Complexes for Use in Tissue Engineering and Drug Delivery
Mechanical Characterization of Hydroxyapatite-Based, Organic-Inorganic Composites
Spontaneous and Biomimetic Apatite Formation on Pure Magnesium
Electrostatic Nanomechanics of Cantilever Biosensors
The Remineralizing Effect of Carbonate-Hydroxyapatite Nanocrystals on Dentine
Tribological Characterization of Surface Treated Titanium for Orthopaedic Joints
Investigation of the Hydroxyapatite Crystallites in Bone at the Interface with Implant by Neutron Diffraction
Preparation of Poly(Lactic Acid) Composites Containing Vaterite for Bone Repair
Ageing Studies of Plasma Deposited Organic Films by Surface Chemical Analysis (ESCA, ToF-SIMS, XAS)
Common Features on Damage Mechanisms Identified on Various Metal and Ceramic on Polyethylene Articulating Surfaces of Total Hip Prostheses
Mechanical Properties and Biocompatibility of Porous Titanium Prepared by Powder Sintering
Receptor-Mediated Gene Delivery Using Chitosan Derivatives In Vitro and In Vivo
Microstructures and Mechanical Properties of Biologically-Inspired Ti-Nb Based Alloys with Ternary Element Additions
Calcium Phosphate Precipitation by Galvanic Current between Titanium and Gold in Pseudo-Body Fluid
Preparation and Characterization of Octyl Methoxy Cinnamate (OMC; 2-Ethylhexyl-p-Methoxy Cinnamate)-Trapped Mesoporous Silica Using Lecithin
Different Processing Methods to Obtain Porous Structure in Shape Memory Polymers
Carbon Nanotubes Grown by Catalytic CVD on Silicon Based Substrates for Electronics Applications
Variation in Bone Quality during Regenerative Process
Fretting Fatigue Studies of Surface Modified Biomedical Titanium Alloys
Formation and In Vitro and In Vivo Evaluation of Surface Modified Implants by HAp, Carbonated-HAp and Titanium Oxide
U.S. FDA Perspective on the Regulation of Cyanoacrylate Polymer Tissue Adhesives in Clinical Applications
Trivalent and Hexavalent Chromium Issues in Medical Implants
Cell Interactions with PDMS Surfaces Modified with Cell Adhesion Peptides Using a Generic Method
In Vivo and In Vitro Evaluation of Coated HAp Films with Different Surface Morphology
Alignment of HAp Crystal Using a Sample Rotation in a Static Magnetic Field
Porous Titanium with Porosity Gradients for Biomedical Applications
Effects of TiN Film Coating on the Electrochemical Behaviors of Dental Implant Screw Surface
Effect of Calcium Phosphate Glass on Proliferation and Differentiation of MG-63 Cells in HA Scaffolds
Composites
Influence of Applied Tensile and Bending Strains on Local and Overall Critical Current of Multifilamentary Bi2223-Composite Superconductor
High Temperature Deformation Behavior and Microstructure Change in Nano Grain Composites
Corrosive-Erosive Wear Studies of Al6061/Albite Composites
Mechanical Properties of Composite Materials Consisting of M3/2 High Speed Steel Reinforced with Niobium Carbides
Development of New Low Cost Discontinuously Reinforced Titanium Composites for Commercial Applications
Low Pressure Infiltration of Molten Aluminum Alloy to Metal Fiber Preform
Importance of Composite Design for the Microstructure of Bundle Drawned Multifilamentary Nb3Sn Wires
SLEEM Study of MgAl2O4 at Interface betweeen Al2O3 and Matrix in Al2O3/Al Alloy Composite Materials
Reducing Threshold Pressure for Infiltration of Al-12Si Alloys into Carbon Particle Compacts by Placing a Thin Layer of Sn at the Infiltration Front
Processing Ti-Al-Nb Composite Sheet Materials Using Cold Roll Bonding and Reaction Annealing
Evaluation of Wear Behavior of Feldspar Particles Reinforced Copper Alloy Composite Materials
Development of High Strength Mo2NiB2 Ternary Boride Base Cermets Produced by Reaction Boronizing Sintering
Combustion Synthesis of TiB2 Particle Dispersed Metal Matrix Composites
Plasticity Mechanisms in Multi-Scale Copper-Based Nanocomposite Wires
Phase Transformation and its Effect on Dry Sliding Wear of Electro-Pressure Sintered Cobalt and Cobalt-Base Composites
Effect of Milling Condition on Properties and Microstructure of Copper Reinforced with 1% vol. NbC
Laser Zone-Remelted Alumina-Based Eutectic In Situ Composite
Crystal Structure of the ß'-Phase in Al-Mg-Si-Ag Alloy
Polymer Nanocomposites as Candidates for Tribological Applications
Analysis of Fine Stress Fields in Metal Matrix Composites Using HOLZ Patterns
Mechanically Alloyed P/M Composites of Al-Mg-Silicide and Al-Mg-Oxide Systems
Synthesis of Carbon Nanotube-Reinforced Al Matrix Composites
Fabrication and Corrosion Properties of Iron Aluminum Alloy/Steel Laminated Composite Prepared by Clad Rolling
Fabrication and High Temperature Creep Behavior of In Situ Synthesized (TiB+TiC)/Ti Composites
Wettability of Basal and Prismatic Plane of Graphite by Molten Aluminum-Magnesium Alloy
Fabrication of Nano-Laminar Glass/Metal Composites by Sintering Glass Flakes
Estimation of Critical Composition for the Transition from Brittle to Ductile in W-Cu Composites
Structure and Properties of PM Composite Materials Based on EN AW-AlCu4Mg1(A) Aluminium Alloy Reinforced with the Ti(C,N) Particles
Bend and Shear Tests: Suitable Methods for Mechanical Characterization of Laminated Composite Materials
Binder-Free Tungsten Carbide Fabricated by Pulsed Current Sintering
Study of Environmental Corrosion Behavior and Mechanism of the Carbon/Epoxy Composite
Effects of Spatial Distribution of Defects on Bending Deformation and Critical Current in Bi2223/Ag Superconducting Composite Tapes
Mechanical Properties of the MG-Based Amorphous/Nano Zirconia Composite Alloy
Production of MMCs on the Basis of Fibres Coated with the Metal Alloy by Magnetron Sputtering
Stacking Faults and Growth Mechanism of In Situ TiB Whiskers and Interface Structures in SPSed TiB/Ti(FeMo) Composites
High Performance Soft Magnetic Composite (SMC) Produced by Improved Process
Synthesis and Characterization of Exfoliated Natural Mica/Polymer Nanocomposites
A Novel Forming Process of Copper Cladding Aluminum Composite Materials with Core-Filling Continuous Casting
The Effect of Boron on the Hardness and Fracture Toughness of WC-FeAl-B and WC-Ni3Al-B Composites
Embossing on Epoxy Thermoset Polymer Using SiO2 Coated Nickel Template
An Analysis on the Tensile Strength of Hybridized Reinforcement Filament Yarns by Commingling Process
An Assessment of Mechanical Properties of Geo-Grid Reinforced Material and its Applicability
Creep Properties of Alborex Reinforced AZ31 Matrix Mg Composites Containing Ag
A Study on the Chemical Resistance of GT Composites
Microscopic Evaluation of Commingling-Hybrid Yarns
Internal Friction and Young's Modulus of 9Al2O3 2B2O3 Whisker Reinforced Aluminum Matrix Composite
Novel Processing of Porous Titanium Composite for Producing Open Cell Structure
Titanium Carbide Particulate Reinforced Titanium Based Composite by In Situ Process
Effect of Vacuum Infiltration Boehmite Gel on Tribological Behavior of Friction Materials
Particle Size Effects on Complex Permeability and Electromagnetic Wave Absorption Properties of Amorphous Alloy-Epoxy Composites
Novel Separation Technique of Particle Reinforced Metal Matrix Composites by Fused Deposition Method
Mechanical Properties of Porous Titanium Compacts Reinforced by UHMWPE
Effects of Fillers on Electrical Properties of PTFE Composites for Circuit Breaker
An Experimental Study on the Frictional Property and Long-Term Performance of GT/HDPE Composites
Preparation of SiC/MoSi2 Composites by Mechanical Alloying and its Fracture Properties
Surface Engineering/Coatings
Effect of Al Content on Corrosion Resistance of (Ti1-xAlx)N Coatings under NaCl Deposit in Wet Oxygen at 600°C
Enhancement of TBC (Thermal Barrier Coatings) Characteristics by Gas Tunnel Type Plasma Spraying
Local Approach to Thermally-Sprayed Coating/Substrate Adhesion through LASAT (Laser Shock Adhesion Test)
Self-Lubrication and Wear Behavior of TiC/a-C:H Nanocomposite Coatings
Grain Refinement of Metal Surface Using Hot Shot Peening
Adhesion Study of Cold-Sprayed CoNiCrAlY-Mo Coating of Inconel 625 Using the Laser Shock Adhesion Test (LASAT)
Recrystallization in NiCoCrAlY Coated DS Nickel Base Superalloys during Thermal Aging
Fabrication Routes of Microsized Electrochemical Biosensors Based on Single-Walled Carbon Nanotubes
Interface Microstructure and Adhesion of Zinc Coatings on TRIP Steels
Evaluation with Surface Analysis Equipment, of Casting Defects in Cast Iron Articles (review)
Laser Shock Processing as a Method for the Improvement of Metallic Materials Surface Properties: A Discussion on the Influence of Combined Mechanical and Thermal Effects
Elecrochemical Performance of LiNi1/3Co1/3Mn1/3O2 with Al2O3 Nano-Particle Coating
Plasma Spray Deposition of Hydroxyapatite Coatings from Sol Precursors
In Situ and Ex Situ Investigation of the Spallation of Thermally Grown Oxides
Surface Modification of Steel Using Liquid Jet Peening (Fatigue Performance)
High Temperature Oxidation Resistance of Two Ni(Co)CrAlYSi(Hf) Overlay Coatings
Effect of Laser Surface Treatment on Microstructure and Properties of MRI 230D Mg Alloy
Cutting Properties of PVD and CVD Coated A2lO 3 + TiC Tool Ceramic
Correlation of Microstructure with Hardness and Corrosion Resistance of Surface Alloyed Materials Fabricated with Fe-Based Metamorphic Powders by Accelerated Electron Beam Irradiation Method
Numerical Simulation of Thermal History in a Novel Spray Forming Process
Modelling of Nitrogen Deposition Pressure Effect on Grain Size Development and Mechanical Properties of Nanocrystalline Ternary Nitride Coatings
Prospective Applications of Gas-Eutectic Porous Materials (Gasars) in USA
Novel High Temperature-Oxidation-Resistant Nanocomposites Developed by Nanocomposite Electrodeposition
Deposition of Multi-Functional Coatings by Physical Vapour Deposition
High-Temperature Tribological Properties of Barite-Type-Sulfate-Coated Substrates with Different Isoelectric Points
Microstructural Evolution of Durable Thermal Barrier Coatings with Hf and/or Y Modified CMSX-4TM Superalloy Substrates
The Effects of Process Parameters on Mechanical Property and Visual Aspect of Plasma Sprayed Y2O3 Coating
Microstructure Characterization and Modeling of Splat Formation during Air Plasma Spraying for Inconel 625 Superalloy
Mechanical and Electrochemical Properties of Plasma Electrolytic Oxide Coatings on Magnesium Alloys
Characteristics of Gallium Oxide Nanowires Synthesized by the Metalorganic Chemical Vapor Deposition
Formation and Characteristic of Room Temperature Electrolytic Sulfidized Coating on Hard Steel Substrate
Prediction of Softening of High Speed Steel with Surface Nitriding for Hot Forging
Surface Modification Technique Using Interfacial Reaction between Ti-Al Alloy and Steel
Electrodeposition of Metallic Nanowires in Nanoporous Polycarbonate Films
Analysis on the Microstructure of Ceramic Coating Layer Fabricated by Plasma Electrolytic Oxidation
Improvement in Wear Resistance of Nano WC-Co Coatings Fabricated by Detonation Gun Spraying
Corrosion Characteristics of TiN and ZrN Coated Ti-Nb Alloy by RF-Sputtering
Zn-Al-Mg Coatings: Thermodynamic Analysis and Microstructure Related Properties
Microstructural Features of Plasma Nitrided Molybdenum Alloy Steel
Comparison with Physics and Chemical Property of SBS/AA Copolymer Using Thermal Polymerization and UV Graft-Polymerization Methods
The Influence of Powder Types and Plasma Spray Conditions on Abrasive Wear of Nanostructured and Conventional Al2O3/TiO2 Coatings
Hydrogen and Fuel Cell Technologies
Lifetime of PEMFCs
Solid Oxide Fuel Cell (SOFC) Development in Denmark
Manufacturing of Solid Oxide Fuel Cells - Bridging the Gap from Laboratory to Industry
Fuell Cell and Hydrogen Vehicles - State of the Art and Challenges for Improved Materials
Proton Exchange Membrane Development and Processing for Fuel Cell Application
Suspension Plasma Spraying of Intermediate Temperature SOFC Components Using an Axial Injection DC Torch
Short Stack Performance of Intermediate Temperature - Operating Solid Oxide Fuel Cells with Hydrocarbon Fuel Processor