Eckert / Schlörb / Schultz Metastable, Mechanically Alloyed and Nanocrystalline Materials (1999)

Erscheinungsjahr 2000
ISBN: 978-3-0357-3413-3
Verlag: Trans Tech Publications
Format: PDF
Kopierschutz: 0 - No protection

E-Book, Englisch, 1100 Seiten

Volume is indexed by Thomson Reuters CPCI-S (WoS).This books reports exciting new research results in the area of bulk metallic glasses and bulk nanocrystalline materials prepared by severe plastic deformation. Other major topics include synthesis and processing of metals, intermetallics and oxides, polymers, nanocomposites and others by different techniques, including mechanosynthesis and mechanochemistry. Also covered are the structural characterization of nanophase materials and the structural evolution caused by mechanical treatment.

Autoren/Hrsg.

Eckert, J.

Schlörb, H.

Schultz, Ludwig

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde

Inhaltsverzeichnis

Preface
Comparative Study from Drop-Tube Experiments and Ab-Initio Calculations of the Nucleation of the s Phase in the Re-W and Re-Ta Systems during Solidification far from Equilibrium
A Unified Landau-Ginzburg Model of Undercooling and Superheating of Crystal-Melt Transition
Structural Stability in Nanocrystal ZnS
Diffusion in Amorphous Alloys and Grain Boundaries: The Correlation between D0 and Q
Grain-Size Refinement in Al-Mn-Ce Rapidly-Quenched Alloys
Electron Microscopy and Synchrotron Radiation Powder Diffraction Study of Icosahedral Ti-Zr-Ni Alloys
Experimental Determination of the Formation Enthalpies of Al-Y and Al-Y-Ni Amorphous Alloys
Anomalies of Mechanical and Physical Properties of the Fe83B17 Eutectic Metallic Glass and their Connection with the Peculiarities of Nanoclusterous Structure
Nonequilibrium Processing of Polymeric Materials by Mechanical Attrition
On the Size Effects in Fullerite Nanoparticles
Solid-State Formation of Carbon and Boron Nitride Nanotubes
Multi-Wall Nanotubes: Stability and Properties
Symmetry Based Analyses of Optical Activity of Single- and Double-Wall Carbon Nanotubes
Ferromagnetic Bulk Glassy Alloys with Useful Engineering Properties
Structural and Magnetic Behaviour of the Rapidly Quenched Nd-Fe-Si Alloys
Effect of Co and Cu Alloying on Nd-Fe-Al Based Bulk Amorphous Alloys
Glass Forming Ability in the Zr-Nb-Ni-Cu-Al Bulk Metallic Glasses
Effect of Additive Elements on the Glass Forming Ability and Crystallization of Zr-Ti-Cu-Ni Metallic Glasses
The Effect of Nitride Addition on the Thermal Stability of Mechanically Alloyed Amorphous Zr65Al7.5Cu17.5Ni10 Alloy
Bulk Amorphous Alloys: Preparation and Properties of (Mg0.98Al0.02)x(Cu0.75Y0.25)100-x
Thermal Stability and Viscosity of Mg-Based Glasses and Composites
Impurity Diffusion in ZrTiCuNiBe Bulk Metallic Glasses
Relation between Diffusion and Decomposition Kinetics in Zr41Ti14Cu12.5Ni10Be22.5 Bulk Glass
Pressure-Volume Relation of Zr-Ti-Cu-Ni-Be Bulk Metallic Glass
Crystallisation of Zr-Based Bulk Metallic Glasses during Fast Heating in a Synchrotron Beam
Atomic Force Microscopy Studies on Duplex Microstructures of Nanocrystalline-Amorphous in Zr-Based Metallic Glass
Crystallization of Zr41Ti14Cu12Ni10Be23 Melts
Crystallization Behavior and Stability of ZrTiCuNiBe Glasses
Comparison of the Decomposition and Crystallization Behavior of Zr and Pd Based Bulk Amorphous Alloys
Formation of Nanocrystals in Zr-Al-Cu-Ni Alloys
Enhanced Plasticity of Bulk Metallic Glasses Containing Ductile Phase Dendrite Dispersions
Low Temperature Ductile Shear Failure of Zr41.2Ti13.8Ni10Cu12.5Be22.5 and Cu50Zr35Ti8Hf5Ni2 Bulk Amorphous Alloys
Hydrogenation and Oxidation of Zr-Based Metallic Glasses, Quasicrystalline or Nanocrystalline Alloys
Corrosion Behaviour of Bulk Amorphous and Crystalline Zr55Al10Cu30Ni5 Alloys at Ambient and Elevated Temperature
Identification of Key Surface Processes for Vapor Deposited Amorphous Metallic Film Growth
Production of Thin Films of Metastable Materials by Cross-Beam Pulsed Laser Deposition
Structural Characterization of Laser Deposited Fe/Al Multilayers
Structural Phase Transformation Observed with In-Situ Mechanical Stress Measurement during the Growth of Amorphous Fe100-xZrx Films
Metastable Phase Formation in Fe-Al Thin Films Cocondensed by Cross-Beam Pulsed Laser Deposition
Grain Boundaries and Mechanical Properties of Nanocrystalline Diamond Films
Thermal Stability of Nanostructured Cr3C2-NiCr Coatings
Synthesis and Characterization of Cryomilled SiC Reinforced Al Coatings
Dispersion Strengthened Materials Obtained by Mechanical Alloying - An Overview
Non-Monotonic Decomposition in the Immiscible Ag-Cu System
Al-Ni Intermetallics Produced by Spontaneous Reaction during Milling
Formation of the Ordered Phases during Mechanical Alloying of 50Fe - 25Al - 25Si(at.%) Mixtures
Structural Investigations of the TiC-Fe(Al) Nanocomposite Formed by Mechanical Alloying
Formation of Ni-Al-Ti-C Nanocomposites by Mechanical Alloying
Thermal Behavior of Mechanically Alloyed Al3Nb Nanocrystalline Powders
Formation of Nanocrystalline FeAl-NbC and FeAl-VC Composites by Mechanical Alloying
Melting Point Depression and Microstructure in Ball-Milled Nanocrystalline Aluminium Powders
Mechanically Induced Disorder in Magnesium Ferrite
X-Ray Study of the Kinetics of Mechanical Alloying
Structural Investigation of a Mechanically Alloyed Nd40Fe60 Powder
Crystallisation of Melt-Spun Al-Fe-Nd-Cu Alloys
Primary Crystallization of Al-Based Metallic Glasses
Evaluation of the Volume Fraction Crystallised during Devitrification of Al-Based Amorphous Alloys
Nucleation Behavior of a-Fe in Amorphous Fe-7Zr-5B-1Au Alloy
The Influence of the Annealing Atmosphere on the Nanocrystallization Behaviour and on the Magnetic and Mechanical Properties of Amorphous FeZrBCu - Base Alloys
Synthesis of Metal-Oxide Nanoparticles by Mechanochemical Processing
Mechanosynthesis of a New Tin Sulphide Phase
Synthesis of Al2O3-TiC by Reactive Milling
Microstructure and Properties of Ti-TiN In-Situ Composites Prepared by Reactive Ball Milling of Ti in Ammonia Followed by Hot Pressing
Hydrogen Disproportionation by Reactive Milling and Recombination of Nd2Fe14B and Nd2Co14B Alloys
Mechanochemical Synthesis in Ti-C, Ti-B, B-C, B-C-Al Systems
Mechanochemical Preparation and Characterization of Nanocrystalline Ceramic Composites
The Combustive Reduction of 2-(2,4-Dichlorophenoxy) Propionic Acid by Mechanochemical Methods
Effect of Reaction Medium on the Mechanochemical Decomposition of ZrH2 and on the Reactivity of Hydride Hydrogen
Reduction of Iron-Oxide by Ball-Milling with Hydrogen Gas Flow
Change in the Short Range Order in the Al Transition Metal Hydroxides Mixed System by Mechanical Stressing
A Molecular Orbital Study on the Formation of Hetero-Metalloxane Bonds under Mechanical Stressing
Mechanochemical Synthesis of Niobium Hydrides
Innovative Processing of Nanostructured Films and Powders using Electrostatic Assisted Aerosol Based Deposition Methods
Nanopowder and Nanostructured Film Synthesis in Low Pressure Flames
Studies on Nanocrystalline Ni/Al2O3 Films Formed by Electrolytic DC Plating
Properties of Alumina-Zirconia Nanocomposites
Synthesis of Si Nanoparticles within Buried Layers of SiOx
Shift of the Absorption Spectra of Undoped and Rare Earth Doped Nanocrystalline Yttria Prepared by Chemical Vapour Synthesis
Low-Cost Nanopowders for Phosphor and Laser Applications by Flame Spray Pyrolysis
Flame Synthesis of Spherical Nanoparticles
Supersonic Cluster Beam Synthesis of Nanostructured Materials
Production of Fe-Cu Ultrafine Particles by Plasma Jet Method
Single Source Precursor-CVD for Nano-Scaled Ceramics and Cermets
On the Development of a Low Temperature, Superplastic Nanocrystalline 5 Mol.% Yttria Stabilised Zirconia: Synthesis, Processing and Mechanical Characterisation
Application of Pulsed Power and Microwave Techniques for the Production of Nanocrystalline Powders and Ceramic Bulk Materials
Hydrogenation-Disproportionation Reactions in Nd14.01Fe78.91Hf0.08B6.99
Hydrogen-Induced Amorphization of SmFe3