E-Book, Englisch, 350 Seiten
Elliott Ultraviolet Laser Technology and Applications
1. Auflage 1995
ISBN: 978-1-4832-9651-7
Verlag: Elsevier Science & Techn.
Format: EPUB
Kopierschutz: 6 - ePub Watermark
E-Book, Englisch, 350 Seiten
ISBN: 978-1-4832-9651-7
Verlag: Elsevier Science & Techn.
Format: EPUB
Kopierschutz: 6 - ePub Watermark
David Elliott learned automatic theory control as an applied mathematician at the Naval Ocean Systems Center and received his Ph.D. in Engineering from UCLA. His dissertation was the first to apply a differential geometric approach to stochastic nonlinear systems. Dr. Elliott helped to found the unique and well-known Department of Systems Science and Mathematics at Washington University, where he is now Professor Emeritus. Since 1992, he has been associated with the University of Maryland where he continues to advise doctoral students and perform research in nonlinear systems. His current research is supported by NeuroDyne, Inc., a company which develops new methods of system control and identification for government and industry. He has served as Associate Editor for the Control Society Newsletter, SIAM Review, Mathematical Systems Theor, and System and Control Letters, and is Associate Editor at Large for IEEE Transactions on automatic control. His research has recently been honored by advancement to Fellow of IEEE.
Autoren/Hrsg.
Weitere Infos & Material
1;Front Cover;1
2;Ultraviolet Laser Technology and Applications;4
3;Copyright Page;5
4;Table of Contents;6
5;Preface;12
6;Acknowledgments;16
7;Chapter 1. Ultraviolet Light;18
7.1;1.1 Introduction;18
7.2;1.2 The Ultraviolet Spectrum;18
7.3;1.3 Historical Development of the Laser;20
7.4;1.4 How a Laser Works;21
7.5;1.5 UV Sources;27
7.6;1.6 UV Lasers;33
7.7;1.7 Inert Gas UV Lasers;38
7.8;1.8 Metal Vapor Lasers;39
7.9;1.9 Nitrogen Lasers;40
7.10;1.10 Helium-Neon Lasers;40
7.11;1.11 The Alexandrite Laser;41
7.12;References;43
7.13;Glossary of Terms;43
7.14;Reading Bibliography;47
8;Chapter 2. Ablation;50
8.1;2.1 The Ablation Phenomenon;50
8.2;2.2 Background and History of Ablation;51
8.3;2.3 Early Discoveries and Uses of Ablation;52
8.4;2.4 Ablation Mechanisms;53
8.5;2.5 Practical Characteristics of UV Reactions;63
8.6;References;71
8.7;Glossary of Terms;73
8.8;Reading Bibliography;75
9;Chapter 3. The Excimer Laser;84
9.1;3.1 Introduction;84
9.2;3.2 History;84
9.3;3.3 Theory of Operation;85
9.4;3.4 The Gain Profile;87
9.5;3.5 Excimer Laser Subsystems;88
9.6;3.6 Laser Operation;92
9.7;3.7 Laser Installation;99
9.8;3.8 Laser Maintenance;99
9.9;3.9 Gas Safety Guidelines;102
9.10;3.10 UV Safety;103
9.11;References;105
9.12;Glossary of Terms;106
9.13;Reading Bibliography;107
10;Chapter 4. UV Materials Research;112
10.1;4.1 Introduction;112
10.2;4.2 Laser Mass Spectral Analysis;112
10.3;4.3 157-nm Fluorine Laser Processing;115
10.4;4.4 Production of X-Rays with 248 nm Energy;116
10.5;4.5 Excimer Laser-Induced Fluorescence;117
10.6;4.6 Tunable UV Laser;118
10.7;4.7 Laser Chemical Vapor Deposition;120
10.8;4.8 Surface Analysis by Laser Ionization;121
10.9;4.9 Photopolymer Research;121
10.10;4.10 Laser Treatment of Organosilicons;124
10.11;4.11 UV Laser Cleaning;124
10.12;4.12 Cross-Sectioning Delicate Structures;127
10.13;References;127
10.14;Glossary of Terms;128
10.15;Reading Bibliography;129
11;Chapter 5. UV Optics and Coatings;140
11.1;5.1 Introduction;140
11.2;5.2 UV Optical Requirements;141
11.3;5.3 UV Optical Materials;142
11.4;5.4 Radiation Damage;143
11.5;5.5 Coating Manufacture;145
11.6;5.6 UV Coatings and Reflection;147
11.7;5.7 Extreme UV Coatings;148
11.8;5.8 Single Layer Antireflection Coatings;151
11.9;5.9 Multilayer Antireflection Coatings;153
11.10;5.10 Dielectric Reflector Coatings;155
11.11;5.11 Metal Reflector Coatings;157
11.12;5.12 UV Coating Types by Application;162
11.13;5,13 Coating Damage and Defects;168
11.14;5.14 Coating versus Polarization;173
11.15;5.15 Optical Fiber Beam Delivery;175
11.16;References;176
11.17;Glossary of Terms;178
11.18;Reading Bibliography;181
12;Chapter 6. UV Laser Cleaning;190
12.1;6.1 Introduction;190
12.2;6.2 Technology Factors in Surface Contamination;191
12.3;6.3 Size of Contaminants;192
12.4;6.4 Contamination;194
12.5;6.5 Integrated Circuit Cleaning;194
12.6;6.6 Thin Film Heads;198
12.7;6.7 Flat Panel Display Cleanings;201
12.8;6.8 Compact Discs;204
12.9;6.9 Printed Circuit Boards;208
12.10;6.10 Cleaning Semiconductor Surfaces;213
12.11;6.11 Laser Ablative Cleaning;216
12.12;6.12 Debris Removal;218
12.13;References;222
12.14;Glossary of Terms;223
12.15;Reading Bibliography;224
13;Chapter 7. Annealing and Planarizing;226
13.1;7.1 Introduction;226
13.2;7.2 Annealing Parameters;227
13.3;7.3 Laser versus Electron Beam;230
13.4;7.4 Pulsed versus Continuous Lasers;231
13.5;7.5 Annealing Process Control;232
13.6;7.6 Laser Planarization;237
13.7;7.7 IC Topography Problems;238
13.8;7.8 Resist Imaging on Topography;240
13.9;7.9 Planarization with Polymer Coatings;242
13.10;7.10 Nonlaser Thermal Planarization;243
13.11;7.11 UV Laser Planarization;243
13.12;References;261
13.13;Glossary of Terms;262
13.14;Reading Bibliography;263
14;Chapter 8. Deep-UV Microlithography;268
14.1;8.1 Introduction;268
14.2;8.2 Evolution of Deep-UV Lithography;268
14.3;8.3 Deep-UV Technology: Resolution;271
14.4;8.4 Resolution: The "k" parameter;271
14.5;8.5 Exposing Wavelength;273
14.6;8.6 Deep-UV Laser Wafer Stepper;274
14.7;8.7 Optical Materials for Deep-UV Imaging;276
14.8;8.8 Deep-UV Light Sources: Mercury Lamps;277
14.9;8.9 Line-Narrowed Excimer Laser Subsystems;278
14.10;8.10 Coherence;283
14.11;8.11 Measurement of Wavelength and Bandwidth;284
14.12;8.12 Laser Performance;286
14.13;8.13 Laser Maintenance;287
14.14;8.14 Utilities;289
14.15;References;289
14.16;Glossary of Terms;290
14.17;Reading Bibliography;294
15;Chapter 9. Micromachining;304
15.1;9.1 Introduction;304
15.2;9.2 Micromachining Processes;305
15.3;9.3 Direct Ablation;307
15.4;9.4 Micromachining Applications;312
15.5;9.5 Three-Dimensional UV Microforming;317
15.6;9.6 Microelectromechanical Systems;323
15.7;9.7 Failure Analysis Applications;325
15.8;9.8 Wire Stripping and Fiber Taps;325
15.9;References;328
15.10;Glossary of Terms;329
15.11;Reading Bibliography;330
16;Chapter 10. UV Lasers in Medicine;334
16.1;10.1 Introduction;334
16.2;10.2 Applications;334
16.3;10.3 UV Laser Advantages in Medicine;335
16.4;10.4 UV Laser Angioplasty;337
16.5;10.5 Corneal Sculpting;342
16.6;10.6 Microbiology Research;344
16.7;10.7 Laser Microsurgery;346
16.8;10.8 Catheter Machining Optics;349
16.9;References;350
16.10;Glossary of Terms;351
16.11;Reading Bibliography;352
17;Index;356
Ultraviolet Light
Publisher Summary
Ultraviolet (UV) light has become important as the various technologies that are necessary to provide practical UV laser imaging and beam delivery systems have progressed, especially the light sources. UV light has been available only from low power lamps, thereby restricting the usefulness of the technology. The discovery and development of the excimer laser made possible the availability of intense ultraviolet light. Researchers explored and uncovered the unique properties of this new light source. As various phenomena involving UV energy and material interactions were discovered and optimized, practical applications emerged. This chapter discusses the UV spectrum, early UV lamp sources, laser physics and operating principles, and development leading to the discovery of the UV laser. UV light is available from a variety of sources, including naturally occurring UV light, UV lamps, and UV lasers. UV light from the sun is abundant, but cannot be easily or economically harnessed for the applications that have practical value. To a lesser degree, UV lamps have the same problem: they supply rich amounts of the ultraviolet wavelengths, but by the time the energy is collected and transmitted through an optical system, little energy is left to meet the demands of most commercial applications.
1.1 Introduction
Ultraviolet light has become more important in recent years as the various technologies necessary to provide practical UV laser imaging and beam delivery systems have progressed, especially the light sources. Historically, UV light has been available only from relatively low power lamps, thereby restricting the usefulness of the technology. The discovery and development of the excimer laser in the 1980s made possible, for the first time, the availability of intense ultraviolet light. Researchers explored and uncovered the unique properties of this new light source. As various phenomena involving UV energy and material interactions were discovered and optimized, practical applications emerged. In this chapter, we discuss the UV spectrum, early UV lamp sources, laser physics and operating principles, and development leading to the discovery of the UV laser.
1.2 The Ultraviolet Spectrum
The “ultraviolet” is a small portion of the electromagnetic spectrum, yet within its boundaries there are three distinct regions (near, mid, and far UV), each with particular significance in terms of applications and properties. Ultraviolet light is roughly defined as that portion (400- to 100-nm wavelengths) of the electromagnetic spectrum between longer wavelength visible light (400–700 nm) and shorter wavelength x-ray (10–100 nm) energy. Figure 1.1 shows the ultraviolet, visible, and infrared spectrums, indicating the various emission lines (1).
Figure 1.1 Laser Spectrum
1.2.1 Far or Vacuum UV
The shortest wavelength portion of the ultraviolet region of the electromagnetic spectrum is the “far UV” or “vacuum UV” (VUV), which is roughly the region from 100 to 200 nm. At these very shortest of the UV wavelengths, air becomes opaque, requiring that experiments be performed in a vacuum (or inert gas) so that the air does not absorb all the UV light. In commercial UV optical delivery systems, far or vacuum UV wavelengths must be contained in inert gas (argon, nitrogen) -purged beam containment tubes. If this is not provided, considerable energy losses will occur from air molecules absorbing the UV photons.
1.2.2 Deep-UV
The “deep-UV” portion of the ultraviolet spectrum is the region from approximately 180 to 280 nm, so-called because it is the deepest area of the ultraviolet where practical UV imaging is routinely done. It is also the deepest part of the UV spectrum where work can be done at atmosphere without side efforts.
1.2.3 Mid-UV
The “mid-UV” is the region of the ultraviolet spectrum from 280 to 315 nm, so-called because it is midway between deep-UV and near-UV.
1.2.4 Near-UV
The “near-UV” is the region from 315 to 400 nm, so-called because it is nearest to the visible portion of the electromagnetic spectrum.
1.3 Historical Development of the Laser
Before UV lasers, there were long wavelength, red lasers. In this section, we will discuss the origins of the UV laser back to the initial concepts of amplification of wave energy. The origins of the laser (Light Amplification by Stimulated Emission of Radiation) are traced back to the early 1900s when Albert Einstein, Niels Bohr, Max Plank, and Ernest Rutherford were developing theories about the nature and behavior of matter.
Rutherford formed the idea of the atom composed of a nucleus with orbiting electrons. The electron orbits occurred at various energy levels. Plank developed the idea of electromagnetic waves as the form taken by radiant energy, and further specified that each frequency had a fixed quantum or amount of energy.
Niels Bohr described the phenomenon of fluorescence or spontaneous emission. This occurs when an atomic electron drops from a high energy level to an unoccupied lower energy level. When this happens, a quantum of light is emitted spontaneously.
Einstein theorized that other forms of emission were possible and formulated the idea of stimulated emission. Einstein predicted that when energy was applied to atoms, the response would be emission of energy.
These scientific theories remained to be proven in the lab, and during World War II, another step was taken to identify what became known as “lasing action” or lasers. High frequency radiowave and microwave oscillators were developed that could generate electromagnetic waves of very high frequencies and short wavelengths. The RADAR (Radio Detection And Ranging) was a useful result of this work. The Microwave Amplification by the Stimulated Emission of Radiation (MASER) was also developed before the laser and proved the theory of population inversion.
An analogy of how light behaves in a laser can be taken from how sound behaves in an amplifier. If a loudspeaker is placed too close to a microphone, the sound from the speaker is reamplified through the microphone and produces a howl. The howl is caused by sound waves, placed at closely spaced intervals, reinforcing each other by being “in phase.” At a certain level, an oscillation begins which produces the howl (3). In the following section, we will explain how this same principle works with light to produce a laser beam.
1.4 How a Laser Works
Lasers are possible because of the way light interacts with atoms and mole cules. To describe how a laser works, we will first review some basic aspects of light/matter interaction. The electrons in an atom or molecule exist in very specific energy levels, called “states.” Each atom possesses electrons that are characteristic to the specific element, or combination of elements (molecules) represented.
1.4.1 Energy State Transitions
When an electron moves from one state to a lower energy level, or state, the atom gives up the excess energy as a “photon” of electromagnetic radiation (either light or x-rays). The amount of energy carried away equals the difference in the energy between the original higher state and the new lower state. In molecules, where these movements (transitions) between states involve motions of entire atoms rather than single electrons, the same phenomenon generally produces lower-energy photons (infrared light).
1.4.2 High and Low Energy Photons
The energy carried by a photon is determined by how rapidly the light waves in it oscillate, and this oscillation is measured either as the frequency (number of oscillations per second) or wavelength (distance that the waves move during one oscillation). Wavelength and frequency are related to each other by the speed at which the photons (waves) move—the speed of light. The energy of a photon (or, equivalently, the frequency or wavelength) determines its color. Blue light photons have more energy-a higher frequency and a shorter wavelength-than red light photons.
1.4.3 Spontaneous Emission
An electron in a particular state can also absorb a photon that has an energy equal to the difference between that state and a higher one. As a result, it can jump to the higher one (called an excited state), where it stays for a period of time before giving up energy by radiating a photon of the same or different energy, and returning to some lower state. This time is called its “lifetime for spontaneous emission.” Spontaneous lifetimes vary enormously, but are typically between a thousandth and a billionth of a second for levels of interest in common lasers. A spontaneously emitted photon can come out in any direction with equal...




