Sonstiges, Englisch, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
Sonstiges, Englisch, Format (B × H): 125 mm x 142 mm, Gewicht: 200 g
ISBN: 978-3-03795-039-5
Verlag: Trans Tech Publications
The peer-reviewed papers comprising this book treat the topics of: composites, micro-/nano-materials, metal-alloy materials, steel and iron, polymer materials, optical/electronic/magnetic materials, new energy materials, environmentally-friendly materials, biomaterials, thin films, structural materials, new functional materials, earthquake-resistant structures and materials, smart/intelligent materials/intelligent systems, hydrogen and fuel-cell science, engineering and technology and other related topics. The work offers near-encyclopedic guide to these fields.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
The Influence of Mechanical Vibration Moulding Process on Thermal Conductivity and Diffusivity of Al-TiC Particulate Reinforced CompositesSurface Modification of Carbon Aerogels for LiFePO4 CompositesUltra-Light Photovoltaic Embedded Structures for Solar-Powered AircraftsPreparation and Properties of PA66/PP/MOS Whisker CompositesFretting Tribology of Cu Matrix Composite Reinforced by In Situ Al2O3 ParticleAdaptive Collaborative Optimization Strategy Based on Genetic AlgorithmStudies on Low-Velocity Impact Damage of Metal Ion Implanted Composite LaminatesEffect of Forging on Microstruture and Mechanical Properties of In Situ TiBw/Ti CompositeFabrication of MgAl2O4 Reinforced Aluminum Matrix Gradient Composites under High Frequency Magnetic FieldRelationship Between Interfacial Shear Strength and Interfacial Tension of Silicone/Quartz Glass Fiber CompositesEffect of Coupling Agent on Bonding Properties of Wood/Polyethylene CompositesAl2O3/Al Composites Consolidated from Alumina and Aluminum Particulates by Reciprocating ExtrusionExperimental Study of Energy Absorption Capability of Metallic-Palm Fiber-Metallic Hybrid Composite PlateMechanical Behavior of Wood Plastic Composites: Effect of Interfacial CompatibilizersSynthesis of NiO@C Composites with Microwave Absorption PropertyHigh Strength Aluminum Nanocomposites Reinforced with Multi-Walled Carbon NanotubesEffect of TiC Addition and Cooling Rate on Mechanical Properties of 316L Stainless Steel CompositesWear Properties of High Volume Fraction SiCP/Mg Composites Produced by Vacuum Pressure InfiltrationFriction and Wear Behavior of Polypropylene/Montmorillonite Intercalated NanocompositesSynthesis and Characterization of Polyimide/Silica NanocompositesMicrostructure and Microwave Sintering Behavior of TiB2/Cu CompositesStudy on Properties of Ceramic-Lined Steel Pipes Prepared by Centrifugal Self-Propagating High-Temperature SynthesisFoundation of Service Life Prediction Model of Sulfate Attack in ConcretePreparation of Epoxy Resin Composites by Chitosan Modified MontmorilloniteDevelopment and Application of High-Valued Wood Products Made of Fast-Growing PoplarA New Preparation Method of Fe-WC Composite Ceramic Powder through Ball MillingExperiments of Infrared Thermography NDT in Composite Materials with Honeycomb Sandwich StructureStudy on the Preparation, Structure and Performances of Antibacterial PET MasterbatchSynthesis and Infrared Emisstivity Properties of CdS/ZnS/Al Composite Material with MicroemulsionsStructure and Infrared Radiation Properties of Metal Oxides-Doped Cordierites Using Graded Sintering SynthesisDynamic Response Analysis on Efficacy of CFG-Pile in Different Height EmbankmentSynthesis of Silver Nanoparticles by Using Bamboo Hemicellulose as Template in Aqueous SolutionFinite Element Analysis and Experimental Verification on Mechanical Properties of Steel Mash Reinforced HDPE Composite MaterialsThe Preparation of Aluminum-Bronze/Steel Duplex Metal by Loose SinteringEffect of Moisture Absorption on the Bending Strength of Carbon/Epoxy Composites with VoidsChinese Design Recommendations for External Strengthening by FRP Laminates and Related Works in ACI and ISIS Code ProvisionsCharacterization of Wood-Polymer Composite prepared by Muchelia macclurei Wood and Methyl Methacrylate MonomerResearch on Glass Fiber Bars of the Shear Property after High TemperatureDiscussion about Application of Composite Repair Technique in Pipeline EngineeringMechanical and Tribological Properties of Polyimide Composite Reinforced with Carbon Fibers and Carbon NanotubeEffect of Fiber Length on Mechanical Properties of Short Carbon Fiber Reinforced PTFE CompositesInfluence of Sb on Wear Resistance of In Situ Mg2Si/Al-Si CompositesResearch on Electrical Double Percolation of Carbon Black-Filled Cement-Based CompositesTensile Behavior of Textile Reinforced Flexible Composites with Single Edge Notch (SEN) under Static SolicitationFinite-Element Simulation of Residual Stress in Zirconia Thermal Barrier CoatingMeasurement of Transverse Permeability of Fabric Preforms Using Ultrasound Monitoring Technique in LCM ProcessesBased on the PB Neural Network of Optimization Design in Lubricant AdditivesEffects of Process on Electrochemical Properties of Pulse Electrodeposited Ti/Pb-WC-PANI Inert ElectrodesOptimizing Design of a Balance Weight Unit for Compensating POS Unbalanced Moment in an Aerial 3-Axis ISP SystemUnderwater Acoustic Radiation Prediction Based on Improved SEA Method and Hybrid FE-SEA MethodFormation of the Intermetallic Layers in Ti-Al Multilayer CompositesExperimental Study of Cutting Parameter for Drilling on Fabric Carbon/Epoxy LaminatesStudies on Preparation and Properties of PVDF-g-PAMPS MembraneA Hybrid-Stabilized Solid Element for Piezoelectric Laminated Plate AnalysisAnalysis of Stresses for Cross-Ply Laminates with Multiple Matrix Cracks under BendingMechanical Properties of Kenaf - Unsaturated Polyester Composites: Effect of Fiber Treatment and Fiber LengthA Domain Ontology-Based Knowledge Organization Model for Complex Product DesignStudy on Properties of Carbon Particle Modified Silicon Carbide Composite CeramicsThe Evolution of Heat Treatment on the Tensile Properties of Na-Modified Al-Mg2Si In Situ CompositeThermal Conductivity of the Diamond-Cu Composites with Chromium AdditionSafety Investigation and Analysis for Highway Tunnel Entrance PavementThe Study of Power Ultrasonic Vibration Cutting HeatStudy on Multi-Axial Mechanical Properties of a Polyurethane Foam and Experimental VerificationImpact Analysis of Aluminum-Fibre Laminated CompositeReinforced Mineral Particles by Surface CoatingStudy on the Preparation of Ni-P-TiO2 Coatings by Electroless Plating and its Photocatalytic PropertiesInvestigation of Phase Composition and Microstructure of the FeAl/Al2O3 Composites Fabricated by Mechanical Alloying and Hot-Pressing ProcessComplexing Agent on the Surface of Magnesium Alloy Plating of Ni-B AlloyPreparation and Basic Properties of Three-Ply Kevlar Fiber/Epoxy CompositesPreparation and Properties of Polyvinyl Chloride/Nitrile Butadiene Rubber/Barium Sulfate CompositesModified Singh-Mitchell Creep Model for EPS Composite SoilPreparation and Study of Novel Nano-Composite Coatings on the Surface of Plastic MouldsEthanol Sensing Properties of Tungsten Oxide Nanocubes Prepared by a Urea-Assisted Hydrothermal MethodModal Analysis Theories and Methods for BridgeA Method of Dual Number for the Aerodynamic Property Analysis of Gas-Lubricated Mechanism:Self-Pressurizing Thrust Bearings and Non-Contacting Face SealsElectrochemical Synthesis and Characterization of NiFe/Au Multisegmented NanowiresPreparation and Performance Testing of Chitosan-Ibuprofen Sustained Release MicrospheresDirect Synthesis of Yttria-Stabilized Zirconia Nanopowder by Thermal DecompositionPerformance Study of Aerostatic Bearings with Arrayed Microhole RestrictorsThermodynamic Analysis of the Extension of Solid Solubility of the Cu-Cr System Processed by Mechanical AlloyingExperiment Study on a Novel Foam System for Enhanced Oil RecoveryDesign of Sample Holders for Soil Experiments Using THz SpectroscopyVisible Light Photocatalytic Activity of Zn-Doped Bi-Mo Complex Metal Oxide Prepared by Hydrothermal Synthesis MethodPerformance of Vanadium Oxide on Multi-Walled Carbon Nanotubes/Titanium Electrode for Supercapacitor ApplicationEffects of Irradiation on Chitosan-Coated Nanoparticles for HyperthermiaCatalytic Combustion of Toluene on Cu-Mn Complex Oxides Prepared by Urea-Based Hydrothermal MethodRapid Detection of Shellfish Major Allergen Tropomyosin Using Superparamagnetic Nanoparticle-Based Lateral Flow ImmunoassayInfluence of Oxygen Donor Alcohols on Non-Hydrolytic Sol-Gel Synthesis of MgAl2O4 Spinel NanoparticlesStudy on the Relation between Electrospinning Fiber Diameter Distribution and Taylor Cone DynamicsStructure and Tensile Properties of Nano-Filament Knitted Fabrics by Alkali TreatmentSynthesis of Self-Assembly Au Nano-Particles Based on Sodium Citrate-Tannin Reduction MethodThe Study of Shrink Fit Design Empirical FormulaHigh Performance Cu-Based Friction Material Reinforced by Nanometer MaterialsHydrothermal Synthesis and Electrocatalytic Property for H2O2 Reduction of Co3O4 NanocubesElectrochemical Polymerization and Characterization of Poly(3-Methylthiophene) in Pure Ionic LiquidsFabrication of Nanosheets and Micro-Spheres from the Self-Assembly and Polymerization of N-OctadecyltrichlorosilaneDetermination of Optimal Cold Reduction Ratio and Annealing Process of High Plastic Stain Ratio Structural Cold Rolling Steel SheetsPreparation and Test of Hierarchical a-Ni(OH)2 Flowers and SpheresGrowth of Nanostructure on Cu0.62Zn0.38 after SMAT during Thermal OxidationStudy on Application of Nanosilica in Paper CoatingThe Influence of Tin Ions on the Thermal Property of ?-FeOOH NanorodsConstitutive Modeling of Nanocrystalline Materials with Shear BandEffect of Grain Rotation on the Strain-Softening Behavior in Nanocrystalline MaterialsDispersion Investigation on Cobalt Blue in Organic SolventFirst-Principles Study of Triangle Terarylene as a Possible Optical Molecular SwitchThe Changes of Hysteresis for Nanocrystalline BaTiO3 Ceramics at Different Impressing Rate of VoltagePreparation of Microfibers with Multi-Hollow Structure by Co-ElectrospinningSynthesis of Hierarchically Porous ZSM-5 by Solvent-Evaporation RouteLow-Temperature Molten Salt Synthesis of NiWO4 NanoparticlesResearch on Preparation, Characterization of Novel Nano-ZnOFinite Element Simulations of Crack Initiation in Ultra-Fined Polycrystalline under Cyclic DeformationComparative Study of Physicochemical Properties of Dragon?s Blood PowdersStudy on Hydrothermal Synthesis of Flower-Sphere MoS2Synthesis and Characterization of Polyacrylonitrile Microspheres by Soapless Emulsion PolymerizationSeed-Mediated Synthesis of one-Dimensional Fe3O4 Particles under Magnetic FieldEffects of Strain Rate and Heat Treatment on the Tensile Property of 1Mn1Zn4Y Magnesium AlloyCompressive Flow Behavior of AZ61 Mg Alloy at Elevated TemperaturesEffects of Element Yttrium on the Microstructure and Mechanical Properties of as-Cast Zn-25Al-5Mg-2.5Si AlloyRheological Constitutive Model Depending upon Temperature and Strain Rate of Sheet TC1 Titanium AlloyEffect of Rotating Magnetic Field on Microstructure Evolution of Pb-Bi AlloysEffects of Annealing Technique on Texture Attenuation of Hot-Rolling AZ31 Magnesium Alloy SheetsFailure Analysis on Tee Joint Crack of Subcritical Power Station Boiler Final Superheater HeaderA Study on the SCC Susceptibility of Twin-Wire Metal Inert Gas Arc Welds in 7A52 Al Alloy PlateStudy on CPM9V High Speed Steel Ring Prepared by Spray FormingOxidation and Melting Characterizations of AZ91D Granules during In Situ MeltingInfluence of SiC Particle Size on the Wear Properties of SiC/Cu CompositesStudy on the Super-Plastic Property of ECAPed Magmesium AlloyResearch of Aluminum Reduction Cell Thermal Balanced Intelligent Control SystemEffects of Solidification Time on Porosity Content in A201 Aluminum Alloy CastingsAn Investigation on a New Type of Fe-Ni Alloy in MIM ProcessThe Effect of PH on the Efficiency of Isoniazid as Corrosion Inhibitors of Brass in 3.0% NaCl SolutionHigh Temperature Salt-Fog Corrosion Behavior of a Ni-Based Super AlloyMicrostructure Refinement by Y2O3 in Semisolid A356 AlloyMicrostructure and Properties of Zn-Al Filler Metal Brazing Cu/Al JointInvestigation of Gas Nitriding on Wear and Corrosion Behavior of 40Cr SteelSmelting of Al-Li Alloy Containing High Li by Micro-Gravity Electromagnetic Force Simulation Facilities and Texture StudyModeling of Cyclic Super-Elastic Behaviors of Shape Memory AlloyHot Deformation Microstructure and Mechanical Properties of Mg-Zn-Nd-Cd-Zr AlloyMicrostructures and Mechanical Properties of Mg-Al-Zn-Y AlloysEffect of Cladding Material on Residual Stress in Quenched Aluminum Alloy PlatePreparation of Semisolid A356 Al Alloy Slurry by Low Superheat Pouring and Weak Traveling-Wave Electromagnetic StirringInfluence of Different Titanium Alloying Methods on the Microstructure and Wear Behavior of ZL108 AlloyModeling of Flow Stress for one New Kind of Metastable ? Titanium Alloy at High TemperatureExperiment Study on Disrepair Principle for the Waved-Edge Milling Insert with Complex 3D GroovesModeling and Experimental Study on Static Characteristic of BT Tool Holder-Spindle InterfaceOxidation Resistance of Co-10Cr-5Si Alloys in 1 Atm of Pure O2 at 700 and 800 OCRegression Analysis and Determination of Activity Coefficients of Cd-Pb AlloyDetermination of Phase Transformation Point of New Type Ti-5Al-3.3V-8Mo-10Nb-1.0Zr-0.5Cr AlloyResearch and Implementation on Variant Design Based on Product Assembly ModelThe Solute Redistribution during Solidification of Multi-Component AlloysCalculation of Valence Electron Structure of Precipitate Phases in Al-Cu Cast AlloyNegative Thermal Expansion of Tm2Fe15SiCr CompoundModeling and Error Compensation of MEMS Gyroscope Dynamic Output Data within the Whole Temperature RangeEvolution of Microstructures and Mechanical Properties of Sr and Ca Containing Mg-4Al Alloy during Annealing Heat TreatmentStudy on the Similar Creep Behaviors and Mathematical Laws of 1Cr18Ni9Ti under Low Stress Repeated ImpactThe Study on Microstructure and Properties of a New Metastable Beta Titanium Alloy after Aging TreatmentAn Adaptive Changeability Approach of Flow Path Feature in Hydraulic Manifold Blocks DesignInfluence of Precipitate Phase on the Strain Rate Sensitivity of Mg-Gd-Y AlloyElectrochemical Preparation of Ce-Mg-Ni Alloy Film in Acetamide-Urea-NaBr Melting SystemResearch on Corrosion Behavior of Fe-B Eutectic Alloy in Liquid ZincDistortion Analysis on Multipassed Butt Weld Using FEM and Experimental StudyInfluence of Nitrogen Content on the Microstructure and Precipitate of the Medium-Carbon Vanadium Microalloyed SteelComparison of Crack Growth Models and Crack Closure EffectPuncture Needle Production Process Intelligent Control System Based on Machine VisionStudy on Relationship of Abnormal Heat Treatment, Microstructure and Properties of P91 SteelEffect of Rare Earth Elements on Corrosion Behavior of Low Carbon Steel in CSPEffect of Prestrain on the Fatigue Crack Initiation life of X60 Pipeline SteelInfluence of Rapid Cooling Temperature on the Microstructure and the Mechanical Properties of a High Al Dual Phase SteelSintering Pot Test on Improving TiO2-Containing Ore?s Allocated ProportionThe Improvement of 13MnNiMoNbR Weld Strength and Low Temperature ToughnessEffect of Vanadium and Niobium on the Microstructure of Carbide Reinforced Indefinite Chilled Cast RollsCasting Low-Carbon Alkaline Agent of TundishCorrosion Study on X70-Carbon Steel Material Influenced by Soil Engineering PropertiesStudy on the Cleanliness of 316L Stainless SteelInfluence of Cooling Rate on the Microstructure of Bainitic SteelExperimental Research on the Novel Process of Iron Ore Direct Reduction by Coal GasResearch on Industrial Shape Meter and its ApplicationShape Detecting and Shape Control of Cold Rolling StripStress Field Numerical Simulation of the Inclusions in Large Rudder Arm Steel CastingMicrostructure Evolution and Precipitation Behavior of a High Nitrogen 15Cr Martensitic Stainless Steel during TemperingA Study on Modified Maximum Force Criterion to Predict Forming Limit Curve of Stainless Steel SheetTwo-Section Model for Adsorption of Tinidazole on Carbon Steel Surface in 3%HCl SolutionMechanism of Work Hardening of Mn13 after Conventional Cold RollingEffect of Vanadium on Microstructure and Mechanical Properties of Air Cooled Medium Carbon High Silicon Bainite SteelsResearch on Thermal Stress of Slab Heating Process Based on Transient Non-Linear AnalysisInfluence of Annealing Temperature on Properties and Texture of High Strength IF SteelThe Effect of Co and Cu on the Creep Properties of High Chromium (12%Cr) Ferritic SteelEffect of Nitrogen on the Impact Toughness of the Bearing Steel GCr15Research on Temperature Changes and Microstructure Evolution of Steel Target after the Penetration by Copper JetCorroded Behavior of 310S Stainless Steel in Molten Al-Si Eutectic AlloyEffect of Additives on Desulfurization Capability of CAS-OB Refining Ladle SlagComparison of Effects of B2O3 and CaF2 on Metallurgical Properties of High Basicity CaO-Based FluxFracture Images Classification Based on Fractional Cosine Transform and Markov ModeThe Effect of Quenching Media on the Microstructure and Mechanical Properties of SA508-3 SteelGeometric Errors Sensitivity Analysis of Precision Vertical Machining Center Based on Multi-Body System TheoryConsistency Maintenance of Collaborative Product Design Based on the Semantics ReasoningExploration of Environmental Education on Campus-Huanggang River Watershed Protection in CaseEffects of Temperature on Corrosion Behavior of X70 Steel in HalonsResearch on Product Knowledge Manipulation in KBE Application for Improving Product DesignEffect of Chemical Composition on Quenching Hardness of 1Cr17Ni2 Stainless SteelExperimental Investigation of Static Characteristics of a Vacuum Preloaded Aerostatic BearingStudy on the Interaction of Rare Earth (La) and Strontium with Titanium and Boron in the Al-Ti-B Based Master AlloyStudying the Structure and Semiconductor Properties of Passive Film on 316SS by XPS and Capacitance MeasurementOn the Dynamics of the Micro-Ring Driven by Traveling Bias VoltagesFormation Conditions for Ce2O2S and CeAlO3 in Cerium Treated Al-Killed SteelsStudy of Thermal Stress of Iron-Boron Alloy CasingApplication and Study of Reactive Polyacrylate Microgel in Pigment Paint of Printed FabricResearch on Some Key Issues of Dynamic Simulation for Workflow ProcessPreparation and Properties of Rigid Cross-Linked PVC FoamSelenium-Containing Curcumin Polymer for Anti-Liver FibrosisStudies on Thermal Stability and Rheological Property of PU/PVDF BlendStudy on Properties and Preparation of Thermoplastic Polyurethane Hot-Melt AdhesiveAdsorption Performance for Ag(?) of an Ethoxycarbonyl Thiourea Chelating ResinEffect of Temperature and Frequency on Dynamic Mechanical Properties of Poly(Methyl Methacrylate)Synthesis and Properties of Waterborne UV PolyurethaneThe Residual Stress Research of Rolling Slab Based on the No-Linear Elastic and Plastic AnalysisInvestigation of Application Conditions of Barium/Strontium Scale Inhibitor in OilfieldsStructure Design and Properties of Porous PVDF Membranes Based on Ionic LiquidResearch on the Modification of Poly(L-Lactic Acid) by Glucose via Direct Melt PolycondensationAnalysis of Entrance Converging Flow of Polymer Melts. A Comparison between Liang Model and Cogswell ModelEffects of Vibration Force Field on Extensional Stress of Polymer Melt in Contraction DieImprovement of Feeding Mechanism of Printing MachineSynthesis of a Novel Cationic Polyacrylamide and Its Application in FlocculationThe Effect of Content of Castor Oil on Two-Component Castor Oil Based Polyurethane AdhesiveCharacterization on Aggregating Structure of Aloe Extract Crosslinked Cotton FabricRubber Modified Asphalt Storage Stabilizer OptionDesign of Floating HPMC Matrix Tablets: Effect of Formulation Variables on Floating Properties and Drug ReleaseProperties of Polycrystalline BaTi2O5 Substituted with MgO Prepared by a Floating Zone MethodRelationship between Technics and Properties during PAN Precursors Formation ProcessRemove Rhodium Catalysts from HNBR SolutionStudy on Viscosity of Poly(Acrylic Acid-Co-Acrylamide) Concentrated Solution with Different Potential Crosslinking AgentSynthesis of ABC Star-Shaped Copolymers via a Combination of Controlled Polymerization TechniquesData-Compensation Based Dynamic Robust Design for Partially Unknown SystemStudy on Preparation of NR/BR Table Tennis Bat RubberComparison of the Friction and Wear Properties of PTFE Coatings under Vacuum Conditions before and after Gamma IrradiationResearch on the Influence of the Road-Friendliness by Semi-Active SuspensionA Research on Modification of Paper-Based Functional Polyurethane MaterialResearch on Polymerization Processes of Cationic Polyacrylate Emulsion and its OptimizationSafety Design of Ammunition Screw Dismantlement Based on Temperature ControlKnowledge Based Plastic Mold Cavity Design and Manufacturing SystemEffects of Annealing Treatment and Buffer Layer on Properties of ZnMgO Films Prepared on Diamond SubstratesProperties of CdMnTe Single Crystal Used in Nuclear Radiation DetectorsApplication of Three-Dimensional Fluorescence Spectrum Method and PARAFAC in Petroleum Pollutant Measurement and IdentificationSignificant Suppression of Photoluminescence in Eu3+ Doped LaPO4 Inverse Opal Photonic CrystalsA Novel Blue-Emitting Phosphor MgAl(PO4)O: Eu2+ for White LEDsPreparation and Upconversion Luminescence Properties of Tb3+-Yb3+ Co-Doped Phosphate Inverse OpalsExperimental Study on Temperature External-Characteristics of Ni-Mn-Ga Shape Memory AlloyEffect of Seed Layers Prepared by Vertical Deposition Method on the Growth and Properties of Oriented Polycrystalline a-HgI2 FilmsMagnetic Properties and Structures of HDDR Nd2Fe14B-Based MagnetExpanded Graphite/Carbon Nanotube as Counter Electrode for DSSCsEffect of Bi2O3 Addition on the Physical and Electrical Properties of Lead-Free (Na0.5K0.5)NbO3 -( Na0.5Bi0.5)TiO3 CeramicsOptimal Design of Inlet Structure of High-Pressure Tubular Reactor JacketResearch on Annealing Temperature of SiO2 on Si SubstrateThe Synthesis and Characterization of SrTiO3 Film Fabricated by Micro ArcoxidationThe Study on the Structural and Optical Properties of C-F Codoped Zinc Oxide from Ab Initio CalculationsEffect of Thickness on the Structural, Electrical and Optical Properties of ZnO Films Deposited by MBEPreparation and Properties of N-ZnS Film/P-Si HeterojunctionEffect of High-Energy Ball Milling on Microstructure and Microwave Absorbing Properties of NdFe MaterialSynthesis and Optical Properties of 2-(1H-Imidazo [4,5-] Phenazin-2-yl) Phenol DerivativesMilling Force Predicting Modeling and Analysis for Helical Tooth End Mill on Inside CornerSynthesis of Single-Phase Nanocrystalline YIG by Co-Precipitation: The Influence of pH Value of Precursor Solution and CalcinatingDesign and Analysis of One-Dimensional Nanostructure on Amorous Silicon Solar Cell for Surface Reflectance ReductionStudy of Dynamic Characteristic of Friendship Avenue BridgeCalcium Lanthanum Permanent Magnetic Ferrite Coupled with Soft Magnetic FerriteESPI for the Piezoelectric Constant MeasurementResearch on the Hydrology Telemetry System of Poyang Lake Based on GPRSThermally Induced Pitch Gradients in Side-Chain Cholesteric Liquid Crystalline PolymersSynthesis and Photoluminescence Properties of the Novel Red Phosphor Gd2MoB2O9: EuNucleation Agent Choice of Li2O?Al2O3?SiO2 Glass Ceramic Having Ideal Micro Spherical Crystal GrainsThe Design of Electroporation Device Based on Dielectrophoresis with its Application on the Control of MonoplastThe Effects of Magnetic Field on the Deposited Performance of CrN Films by Magnetron SputteringThe Study of Hydrogen Sorption Properties of Mg17Al12La0.45Test Method of Fiber Optic Gyroscope Based on Allan VarianceElectro-Oxidation of Ethanol on the Preparation of Electroless Ni-P Alloy ElectrodeHigh-Temperature Performance of Amorphous Nickel Hydroxide Coated with La(OH)3Research on FEA and Optimizing for Structural Design of Pipelayer' BoomInvestigation on Structure and Electrochemical Properties of MgNi+x%B (x=0,2,5,10) Hydrogen Storage AlloysMulti-Objective Optimization Design of Complex Mechanical and Electrical Products Based on Improved Evolutionary AlgorithmPreparation Development of High-Quality Solar-Grade Multi-Crystalline Silicon by Directional SolidificationA Study on the Electrochemical Properties of LiFePO4 Doping with Different Diameter MWCNTsStudy on the Pair?s Characteristics of Web Press?s Fold System in High SpeedDistribution of NiO/Al2O3/NiAl2O4 in the Fabrication of Spray-Dry Oxygen Carrier Particles for Chemical-Looping CombustionTraction Transmission Gearbox Mechanical Properties Numerical Calculation and Strength AnalysisDesign of Holmium Laser Treatment Instrument Control SystemResearch on Electrochemical Properties of Alpha-Ni(OH)2 Prepared by Electrodeposition Method in the Ethanol and Water SystemSynthesis, Characterization and Performance of Ce0.8La0.2O1.9-ATP Composite Catalyst for Phenol Catalytic OxidationApplication of Irradiation Process for Surface Grafting and Copper RemovalSmooth B-Spline Curves Extension with Ordered Points ConstraintPreparation of Activated Carbon Supported Nano-TiO2 Photocatalyst Material and its Application in Papermaking Midcourse WastewaterStudy on Thermal-UV Curing Process of Waterborne Dual Crosslinkable Coating MaterialEffect of Ti on Corrosion of Cast AZ91 Magnesium AlloyA Visual Tracing Control Platform Based on Multi-Axis Linear DriveApplication of Error Design Idea to Deal with the Shafting Error of Photoelectric TheodoliteModeling and Analysis of the Transmission Characteristics of a Geared Linkage MechanismDielectric Properties and Diffuse Phase Transition of Sol-Gel Derived 0.94(Bi0.5Na0.5)TiO3-0.06BaTiO3 CeramicsThe Simulation and Experimental Research on Gas Cooler of the CO2 Trans-Critical CycleA Double Imprinted Organic-Inorganic Hybrid Sorbent for Selective Separation of Lead from Aqueous SolutionRecycling of Thermosetting Epoxy Molding Compound Waste into PVC Composites: Effect of Silane Coupling Agent on Morphology and Physical PropertiesDetection of Infected Tephritidae Citrus Fruit Based on Hyperspectral Imaging and Two-Band Ratio AlgorithmStudy on the Effect of Curing Conditions on Hydrate Properties of Fluorgypsum by Semi-Dry PressingUtilization of Desulfurized Ash as a Modifier in Fluoride Retention and Deacidification of FluorgypsumLignin Separation and Antioxidant Capacity from Acanthopanax senticosus Remainders Using Acetic Acid-Water SystemEnvironment-Friendly Cottonseed Protein Bioplastics: Preparation and PropertiesRemoval of Formaldehyde Using the Aminated Activated Carbon by EtilenodiaminaStudies on Burning Process of Clinker Used for Corrosion-Resisting Cementitious Material in Fill MiningKinetics of the Adsorption for Naphthol Green by Epichlorohydrin Modified Peanut ShellFabrication and Properties of Lignin/Castor Oil-Based CompositesA Hybrid Interaction Method with Virtual HandDesign of New Condition Monitoring System and Data Analysis in Large Forging Die Hydraulic PressStudy on the Coexistence of Porous Ecological Concrete with PlantsThe High-Temperature Corrosion of Fe-Cr-Mo Alloy by Co-Firing of Coal and BiomassResearch of Wheat Precision Seeding Test System Based on Image ProcessingThe Optimization Design of New Type F-Nail Nailing MachineResearch of Chinese Buddhist Temples Space DesignResearch on Process and Pollution of Atmospheric and Vacuum DistillationPunching Force of Cold Die of Fuzzy Reliability Considering the Random Distribution of Material PropertiesUsing Cow Bone Char for Improvement of Domestic Water Quality in Chiang Mai, ThailandEvaluation on the Blast Resistance of Fiber Reinforced ConcreteRobotic Cross-Lines Laser Indicator and Range FinderStudy on Scattering of Left-Handed Materials Elliptical CylinderSurvey and Evaluation of Concrete Durability for 40 Sluices in Coastal Area, East ChinaResponse of Ultrasonic Wave Velocity to Wood Structure Defect of Korean PineStudy on the Adsorption of Copper Ions by BentoniteSynthesis of Hydroxyapatite Powder from Mollusc ShellHerbal-Loaded Multifunctional Nanocomposities as Nanocarrier for Cancer Therpy: Synthesis and QualityPreparation and Application of a Stable Biomembrane Mimetic CoatingStudy on Permeability Coefficient of Different Bamboo/Fir Veneer SurfacePreparation and Characterization of PCL/PVP Blend MembraneRate Optimization Congestion Control Protocol for Wireless Sensor NetworksInvestigation on Surface Crack of C38N2 Automobile Engine CrankshaftEffect of Concentration on Structure and Properties of Concentrated Regenerated Silk Fibroin SolutionDesign of a Reconfigurable Modular Underwater VehicleA Powerful Discovery Procedure for Large-Scale Significance Testing, with Application to Comparative Microarray Experiments in Response to Different BiomaterialsDesign and Research on Mechanical Properities of New Type Low Modulus Biomedical Metastable ? Titanium AlloyEnergy Conservation Study during Abrasive Water Jet CuttingError Correction of Theory Model in Process-Stress Accelerated TestHydrothermal Synthesis of Hydroxyapatite Urchins and its Drug Release PropertyBending Deformation Measurement of Bone Cantilever Using Image CorrelationStudy for Seeking Optimal Mix Proportion of Resin ConcreteFabrication of Polycaprolactone/Chitosan Scaffolds by Freeze-Solvent Extraction MethodThe Microstructure and Tensile Property of Mg-Zn-Ca-Zr Alloy Sheet Coated with HA and its Antihemolytic AbilityAntioxidiation of Extract of Chinese Quince on OilPreparation of Hydroxyapatite Powders via Neutralization ProcessTemplate Induced Synthesis of Nano-Hydroxyapatite by Co-Precipitation MethodModification Mechanism of the ZTA Ceramic Powders with Stearic AcidPreparation and Characterization of Bone-Like Apatite Coating on Ti6Al4V Spinal Fusion DevicesMultiple Modifications on Carbon Fiber Surface and Effects on Microorganism ImmobilizationMicrostructure, Mechanical Properties and Corrosion Behavior of Mg-1Zn-0.5Ca AlloyEffect of Size on Degradation of Porous Poly(Lactic Acid) ScaffoldPreparation and Characterization of Silver/Hydroxyapatite NanoparticlesPreparation, Characterization and In Vitro Evaluation of IVM Loaded Poly(lactic-Co-Glycolic Acid) (PLGA) MicrospheresImpact of Sterilization Methods on the Stability of Silk Fibroin SolutionInfluence of Chitosan on Electrospun PVA Nanofiber MatA Study on Tensile Properties of NiCoCrAl/YSZ Multiscalar MicrolaminateInvestigation of Effect of Chemical Etching and Temperature on Optical Properties of Porous Silicon LayerLow-Temperature Ni Acetate Induced Crystallization of a-Si Thin Film by Microwave AnnealingThe Preparation, Texture and Electrodeposition Mechanism of Reticular MnO2 Catalytic Materials with High PorosityStudy on Coloring Protective Composite Oxide Film on Aluminum SurfaceSi3N4 Double Passivation Methods for Optimizing the DC Properties in a Gamma-Gate AlGaN/GaN HEMT Using Plasma Enhanced Chemical Vapor DepositionStudy on the Heat Sealable Property of Biaxially Oriented Polyester FilmSurface Modification of PET Films by Vapor-Phase Photografting Acrylic Acid and its Application to Electroless Copper PlatingNon-Uniform Simplification of Point CloudsMicrostructure and Nanoindentation Hardness of Sputter Deposited Nanocrystalline Tantalum Thin FilmsCoating Technique?s Application in the Improvement of Mechanical Behavior of Polyester Textile in Corrosive EnvironmentEffect of Nano-Sized ZnO Particle Addition on PVDF Ultra?ltration Membrane PerformanceReview of Working Performance Modeling and Optimization of Cone CrusherStress Migration Induced Formation of Voids / Hillocks in Tungsten FilmsEffect of Airflow on Performance of Splicing Fiber under Different Chamber?s Inlet PressureMechanical Properties of Concrete with Aggregate Type at Elevated TemperatureStudy on a Kind of Rust-Transforming TechnologySynthesis of the Water-Compatible P-Aminophenol Resin and its Adsorption for Salicylic AcidExperimental Research on Effect of Hot Works on Mechanical Performance of Ship Steel PlateSkip Neighborhood Hybrid Particle Swarm Optimization AlgorithmResearch on Overconstrains of Planar MechanismsMicrostructure and Mechanical Properties of as-Forged Ti-47Al-2Cr-2Nb-Y AlloyExperimental Study and Performance Analysis of Concrete Shrinkage-Reducing AgentsStatic Performance Analysis on Combined Truss with Steel Tube and Concrete-Filled Steel Tube Based on Total Strain Crack Constitutive ModelFinite Element Analysis on Static Performance on Combined Truss with Rectangular Steel Tube and Concrete-Filled Steel TubeInfluence of Early Age Wet Curing Time, Clinker and CaO Content on the Carbonation Resistance of C40 Ordinary ConcreteEffect of Isothermal Holding Parameters on the Solid Particles Evolution of Semisolid AZ91D Alloy Produced by SIMAThe Influences of TiN Content on the Properties of the In Situ Al2O3-TiN CompositesThe Variables Reduction for Concrete Strength Prediction Model Using a Rough Sets MethodRelationship between Thickness of Lamellar a+? Phase and Mechanical Properties of Titanium AlloyThe Effect of Aluminum Clad on the Electrochemical Properties of the Similar Weld of Friction-Stir Welding of 2524Modeling of Pressure Drop in a 3-D Network Ceramic Diesel Particulate FilterDistribution Character of Structural Stress for Aluminum Alloy Thick PlatePrediction of the Tension Softening Curve of Dam Concrete Based on BP Neural NetworkAssesment of Main Models for Predicting Debonding Load-Bearing Capacity against Intermediate Crack-Induced Debonding Failure in FRP-Strengthened RC BeamsAssesment of Proposed Models for Determining Allowable FRP Tensile Strain for Mitigation of Debonding Failure in FRP-Strengthened RC BeamsStudy on CO2 Sequestration Property of Cement Based Composite Cementitious Materials Containing Steel Slag Used in RoadSimulation Study on Heat Insulating Material Used in Refrigerated Cargo Hold Shipboard of Fishing VesselElectromechanical Coupling Coefficient of SAW on Proton-Exchanged and Annealed LiNbO3 WaveguidesNumerical Simulation of Embedded and Co-Cured Composite Damping Structure under Low Velocity ImpactMicrostructure Formation with the Elastic Interactions of Internal Stress and Applied StressExtenics Decision Model for Evaluating Mechanical Joint Interface of Reconfigurable Machine ToolsThe Strength Reliability Analysis of Periodically Symmetric Struts Supports of Gas Turbine Based on Monte-Carlo MethodAnalysis on Properties of Water-Based Fire-Retardant Nano-CoatingsProperties of Autogenous Shrinkage in High-Strength Mass Concrete According to Hydration Heat VelocityEffect of Anisotropic Membrane Surface Modification of Nafion Based Ionic Polymer-Metal CompositesAging Behavior of Cu-Cr-Zr-Y AlloyIntegrated Design of Hydrostatic Slideway Driven SystemStrain Hardening Modeling of High-Strength Stainless Steel TubeA Simulation Study for the Influence of Pulse Heating on Thermal Imaging of Carbon Fiber CompositesPreparation of Terminal Phenolic Hydroxyl Triazine Dendrimer and its Combination Tanning Properties with the Aluminum SaltsInfluence of Pulsed Current Annealing on Giant Magneto-Impedance Effects of Co Based Amorphous RibbonSome Research on the Magnetic X Zeolite CompositesPreparation and Research of Phase Change Material Based EVA / Binary Fatty Acids CompositeThe Progress in Research on Silk Fibroin Blend MembranesMicrostructure and Mechanical Properties of 3D Needled Carbon Fibre Reinforced Carbon and Silicon Carbide CompositesExperimental Investigation Contrast to Coal Dust and FS Powder ApplicationSurface Modification for Cotton Fiber and its Antimicrobial CharacteristicsEffects of Heat Treatment Condition on Properties of Strontium Barium Niobate Based Glass-Ceramic for Energy Storage CapacitorsStudy of Cellulose-Dibutyl Sebacate Copolymer Synthesis and Characterization of Crosslinked Cellulose-Dibutyl Sebacate Copolymers for Oil AbsorbencyPreparation of the Microsphere-Sized Poly(N-Isopropylacrylamide) Hydrogel Dispersed in Poly(Vinyl Alcohol) Matrix and its Thermo-Responsive Releasing BehaviorEnhanced Photoelectrocatalytic Degradation of Azo-Dye Pollutants Using Transparent Titania Nanotube Arrays Glass ElectrodeMicrostructure and Wear Behavior of Ti-Matrix Functional Gradient LayerSynthesis and Characterization of New Functional Material (C6H5CNH2nNH3)2PbI4(where n=0,1,2)The Efficient Synthesis of 1,3-Diallyloxy-2-Propanol without SolventHydrothermal Synthesis and Ferromagnetic Properties of Mn-Doped Na0.5Bi0.5TiO3 CrystalsInfluence of Different Extraction Methods of Tea Polyphenols on Proportions of CatechinsSynthesis and Electrical Properties of Mo-ZrO2 CermetInvestigation of Initial Bubbles of CO2 Injected into Polymer MeltStudy on Microstructure and Corrosion Behavior of Ag-Cu-Zn-Ni AlloysPerformance Evaluation of High-Modulus Asphalt MixtureCone Calorimeter Analysis on the Fire-Resistant Properties of FRW Fire-Retardant ParticleboardPreparation and Characterization of Organic-Inorganic Hybrid Perovskite (C6H5CH2NH3)2CuCl4Effect of Composite Shape-Stabilized Phase Change Material on Asphalt Mixture TemperatureThe Study of the Large-Sized High-Quartz Translucent Porcelain PlateCatastrophic Analysis of Seismic Response of Gravity Dam Sliding along Base SurfaceTransient Analysis of Flow Field in Cylinder of an EngineThe Research of Evaluation for Product Conceptual Design Based on ANP and Fuzzy TheoryInvestigation on Innovative Design Method of VehiclesModeling of Passive Adaptive MR DamperExperiment Research and Numerical Simulation of an Innovative Seismic Isolating System Designed for Long-Span Continuous Girder BridgesStudy of Cylinder Liner Based on Ultrasonic Plateau HoningExperimental Research on Four-Tube Concrete-Filled Steel Tubular Laced ColumnsDesign of a Piezoelectrically Actuated Jumping RobotStudy on Effect of Relief Groove Angle Expressing the Position in Reducing Noise of Swash Plate Axial Piston PumpEffects of Temperature, Relative Humidity and Washing Times on the Electrical Conductivity of Carbon-Coated FilamentsThe Design of Combustion Control System Based on Fuzzy Immune Internal Model ControllerThermal Post-Buckling Improvements of Laminated Composite Plates Using the Active Strain Energy Tuning ApproachCoordination Needs and Performance for Manufacturing Process Improvement ProjectsDesign and Analysis of MR Damper with Radial Duct for Tracked Vehicle SuspensionMicrostructure and Mechanical Properties of Mg-RE-B AlloysPreparation of Brunet Reflective Exterior Insulation CoatingDynamic Coupling Hysteresis Model for Giant Magnetostrictive MaterialsPreparation of Monodisperse Poly(N-Isopropylacrylamide) Microgels with ?-Cyclodextrin MoietiesStudy on Diesel Engine Fault Diagnosis Based on Integration of Bayesian and Genetic Neural Network MethodModeling of Electrical Resistivity Evolution Using Free Energy Analysis for NiTi Shape Memory Alloy WiresSemi-Active Control of a Vehicle Suspension Based on Magneto-Rheological DamperThe Research on the Preparation of Sodium-Poly-Methyl-Acrylic and Sodium-Alginate Blend-Micro-Spheres and its FormExperiments and Analysis of Bending Dielectric Elastomer ActuatorDamage Evaluation in Smart Materials Using Time-Frequency AnalysisPerformance of Ba0.5Sr0.5Co0.8Fe0.2O3-d-Ag Composite Cathode Materials for IT-SOFCsPolynomial Based Elasticity Solutions of Beams and their Numerical Validation: A ReviewDevelopment of Green Remanufacture Mechanized Production Line which Use for 200L Oil Drum (iron) Circulation UseConjugate Limits and Interferential Condition as Milling the Helical FaceA Proposal of Robust Design Method for Deriving Adjustable RangeFriction Stir Processing for the Modification of Laser Claded MicrostructureThe Variable Cross-Section Helix Turning Trajectory Algorithm Used on the Middle-Convex and Varying Ellipse Piston SkirtStudy on Hydrogen Evolution Properties of Carbon Supported PtCu-LaOx Membrane Electrode MaterialsStudy on Cold Precision Forging of Non Straight Wall Cavity PistonThe Research of Nonlinearity Error Control on Five-Axis Machining Post ProcessorEffect of Graphite Dopant on the Performance of Tubular Cathode for Direct Ethanol Fuel CellTwo-Dimensional Numerical Simulations of Tubular Cathode in a Direct Ethanol Fuel CellLaser Hybrid Welding Processing of Mg-Rare Earth AlloyPrediction of Temperature Distribution in High-Speed End Mill Assisted by Heat Pipe CoolingMicrostructure and Mechanical Properties of Laser Welded Lap Joints of Ti-6Al-4V AlloyResearch on the Velocity Look-Ahead Algorithm in the NC SystemEffect on Formation of 5083 Aluminum Alloy of Activating Flux in FBTIG WeldingOptimization on Resistance Performance of High Speed Unmanned Surface Vehicle in Middle-Low SpeedAdaptive Variable Speed Control of Wind TurbinesStudy on the Performance of Ba0.5Sr0.5Co0.8Fe0.2O3-d Membrane after Laser Ablation for Methane ConversionDesign of Digital-High-Power LAB ChargerElectrochemical Performance of New Ferroalloy Electrode of RE2FeSb2 (RE = Y, Dy, Er)Welding Technique for New High Speed Railway Track Key PartMicro-Tubular Solid Oxide Fuel Cell with Graded Anode and Cobalt-Free SrFe0.9Sb0.1O 3-d Perovskite CathodeA Numerical Investigation of a Capacitive Viscometer with Fluid-Structure Interaction Using Equivalent ModelingResearch and Application of Wireless Data Acquisition System for Agricultural MachineFinite Element Analysis on Thermal Characteristics of Lathe Motorized SpindleStructure Optimal Design Method and Engineering ApplicationSilicone-Modified Butyl Acrylate-Methyl Methacrylate Copolymer Latex: Effects of Coupling AgentsStudy on Hoist Force Calculation of Hydraulic Lifting System Used in Pressure Balance Workover RigStiffness Calculation and Predetermined Preload Optimal Design of Cable Control SystemMulti-Domain Unified Modeling and Simulation for Aircraft Landing Gear Using Modelica
