Guo Advanced Materials and Processes: ADME 2011

Erscheinungsjahr 2011
ISBN: 978-3-03813-633-0
Verlag: Trans Tech Publications
Format: PDF
Kopierschutz: 0 - No protection

E-Book, Englisch, 2580 Seiten

The peer-reviewed papers comprising this book treat the topics of: composites, micro-/nano-materials, metal-alloy materials, steel and iron, polymer materials, optical/electronic/magnetic materials, new energy materials, environmentally-friendly materials, biomaterials, thin films, structural materials, new functional materials, earthquake-resistant structures and materials, smart/intelligent materials/intelligent systems, hydrogen and fuel-cell science, engineering and technology and other related topics. The work offers near-encyclopedic guide to these fields.

Autoren/Hrsg.

Guo, Zhong Ning

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde

Inhaltsverzeichnis

Preface, Organizing Committee
Composites
The Influence of Mechanical Vibration Moulding Process on Thermal Conductivity and Diffusivity of Al-TiC Particulate Reinforced Composites
Surface Modification of Carbon Aerogels for LiFePO4 Composites
Ultra-Light Photovoltaic Embedded Structures for Solar-Powered Aircrafts
Preparation and Properties of PA66/PP/MOS Whisker Composites
Fretting Tribology of Cu Matrix Composite Reinforced by In Situ Al2O3 Particle
Adaptive Collaborative Optimization Strategy Based on Genetic Algorithm
Studies on Low-Velocity Impact Damage of Metal Ion Implanted Composite Laminates
Effect of Forging on Microstruture and Mechanical Properties of In Situ TiBw/Ti Composite
Fabrication of MgAl2O4 Reinforced Aluminum Matrix Gradient Composites under High Frequency Magnetic Field
Relationship Between Interfacial Shear Strength and Interfacial Tension of Silicone/Quartz Glass Fiber Composites
Effect of Coupling Agent on Bonding Properties of Wood/Polyethylene Composites
Al2O3/Al Composites Consolidated from Alumina and Aluminum Particulates by Reciprocating Extrusion
Experimental Study of Energy Absorption Capability of Metallic-Palm Fiber-Metallic Hybrid Composite Plate
Mechanical Behavior of Wood Plastic Composites: Effect of Interfacial Compatibilizers
Synthesis of NiO@C Composites with Microwave Absorption Property
High Strength Aluminum Nanocomposites Reinforced with Multi-Walled Carbon Nanotubes
Effect of TiC Addition and Cooling Rate on Mechanical Properties of 316L Stainless Steel Composites
Wear Properties of High Volume Fraction SiCP/Mg Composites Produced by Vacuum Pressure Infiltration
Friction and Wear Behavior of Polypropylene/Montmorillonite Intercalated Nanocomposites
Synthesis and Characterization of Polyimide/Silica Nanocomposites
Microstructure and Microwave Sintering Behavior of TiB2/Cu Composites
Study on Properties of Ceramic-Lined Steel Pipes Prepared by Centrifugal Self-Propagating High-Temperature Synthesis
Foundation of Service Life Prediction Model of Sulfate Attack in Concrete
Preparation of Epoxy Resin Composites by Chitosan Modified Montmorillonite
Development and Application of High-Valued Wood Products Made of Fast-Growing Poplar
A New Preparation Method of Fe-WC Composite Ceramic Powder through Ball Milling
Experiments of Infrared Thermography NDT in Composite Materials with Honeycomb Sandwich Structure
Study on the Preparation, Structure and Performances of Antibacterial PET Masterbatch
Synthesis and Infrared Emisstivity Properties of CdS/ZnS/Al Composite Material with Microemulsions
Structure and Infrared Radiation Properties of Metal Oxides-Doped Cordierites Using Graded Sintering Synthesis
Dynamic Response Analysis on Efficacy of CFG-Pile in Different Height Embankment
Synthesis of Silver Nanoparticles by Using Bamboo Hemicellulose as Template in Aqueous Solution
Finite Element Analysis and Experimental Verification on Mechanical Properties of Steel Mash Reinforced HDPE Composite Materials
The Preparation of Aluminum-Bronze/Steel Duplex Metal by Loose Sintering
Effect of Moisture Absorption on the Bending Strength of Carbon/Epoxy Composites with Voids
Chinese Design Recommendations for External Strengthening by FRP Laminates and Related Works in ACI and ISIS Code Provisions
Characterization of Wood-Polymer Composite prepared by Muchelia macclurei Wood and Methyl Methacrylate Monomer
Research on Glass Fiber Bars of the Shear Property after High Temperature
Discussion about Application of Composite Repair Technique in Pipeline Engineering
Mechanical and Tribological Properties of Polyimide Composite Reinforced with Carbon Fibers and Carbon Nanotube
Effect of Fiber Length on Mechanical Properties of Short Carbon Fiber Reinforced PTFE Composites
Influence of Sb on Wear Resistance of In Situ Mg2Si/Al-Si Composites
Research on Electrical Double Percolation of Carbon Black-Filled Cement-Based Composites
Tensile Behavior of Textile Reinforced Flexible Composites with Single Edge Notch (SEN) under Static Solicitation
Finite-Element Simulation of Residual Stress in Zirconia Thermal Barrier Coating
Measurement of Transverse Permeability of Fabric Preforms Using Ultrasound Monitoring Technique in LCM Processes
Based on the PB Neural Network of Optimization Design in Lubricant Additives
Effects of Process on Electrochemical Properties of Pulse Electrodeposited Ti/Pb-WC-PANI Inert Electrodes
Optimizing Design of a Balance Weight Unit for Compensating POS Unbalanced Moment in an Aerial 3-Axis ISP System
Underwater Acoustic Radiation Prediction Based on Improved SEA Method and Hybrid FE-SEA Method
Formation of the Intermetallic Layers in Ti-Al Multilayer Composites
Experimental Study of Cutting Parameter for Drilling on Fabric Carbon/Epoxy Laminates
Studies on Preparation and Properties of PVDF-g-PAMPS Membrane
A Hybrid-Stabilized Solid Element for Piezoelectric Laminated Plate Analysis
Analysis of Stresses for Cross-Ply Laminates with Multiple Matrix Cracks under Bending
Mechanical Properties of Kenaf - Unsaturated Polyester Composites: Effect of Fiber Treatment and Fiber Length
A Domain Ontology-Based Knowledge Organization Model for Complex Product Design
Study on Properties of Carbon Particle Modified Silicon Carbide Composite Ceramics
The Evolution of Heat Treatment on the Tensile Properties of Na-Modified Al-Mg2Si In Situ Composite
Thermal Conductivity of the Diamond-Cu Composites with Chromium Addition
Safety Investigation and Analysis for Highway Tunnel Entrance Pavement
The Study of Power Ultrasonic Vibration Cutting Heat
Study on Multi-Axial Mechanical Properties of a Polyurethane Foam and Experimental Verification
Impact Analysis of Aluminum-Fibre Laminated Composite
Reinforced Mineral Particles by Surface Coating
Study on the Preparation of Ni-P-TiO2 Coatings by Electroless Plating and its Photocatalytic Properties
Investigation of Phase Composition and Microstructure of the FeAl/Al2O3 Composites Fabricated by Mechanical Alloying and Hot-Pressing Process
Complexing Agent on the Surface of Magnesium Alloy Plating of Ni-B Alloy
Preparation and Basic Properties of Three-Ply Kevlar Fiber/Epoxy Composites
Preparation and Properties of Polyvinyl Chloride/Nitrile Butadiene Rubber/Barium Sulfate Composites
Modified Singh-Mitchell Creep Model for EPS Composite Soil
Preparation and Study of Novel Nano-Composite Coatings on the Surface of Plastic Moulds
Micro/Nano Materials
Ethanol Sensing Properties of Tungsten Oxide Nanocubes Prepared by a Urea-Assisted Hydrothermal Method
Modal Analysis Theories and Methods for Bridge
A Method of Dual Number for the Aerodynamic Property Analysis of Gas-Lubricated Mechanism:Self-Pressurizing Thrust Bearings and Non-Contacting Face Seals
Electrochemical Synthesis and Characterization of NiFe/Au Multisegmented Nanowires
Preparation and Performance Testing of Chitosan-Ibuprofen Sustained Release Microspheres
Direct Synthesis of Yttria-Stabilized Zirconia Nanopowder by Thermal Decomposition
Performance Study of Aerostatic Bearings with Arrayed Microhole Restrictors
Thermodynamic Analysis of the Extension of Solid Solubility of the Cu-Cr System Processed by Mechanical Alloying
Experiment Study on a Novel Foam System for Enhanced Oil Recovery
Design of Sample Holders for Soil Experiments Using THz Spectroscopy
Visible Light Photocatalytic Activity of Zn-Doped Bi-Mo Complex Metal Oxide Prepared by Hydrothermal Synthesis Method
Performance of Vanadium Oxide on Multi-Walled Carbon Nanotubes/Titanium Electrode for Supercapacitor Application
Effects of Irradiation on Chitosan-Coated Nanoparticles for Hyperthermia
Catalytic Combustion of Toluene on Cu-Mn Complex Oxides Prepared by Urea-Based Hydrothermal Method
Rapid Detection of Shellfish Major Allergen Tropomyosin Using Superparamagnetic Nanoparticle-Based Lateral Flow Immunoassay
Influence of Oxygen Donor Alcohols on Non-Hydrolytic Sol-Gel Synthesis of MgAl2O4 Spinel Nanoparticles
Study on the Relation between Electrospinning Fiber Diameter Distribution and Taylor Cone Dynamics
Structure and Tensile Properties of Nano-Filament Knitted Fabrics by Alkali Treatment
Synthesis of Self-Assembly Au Nano-Particles Based on Sodium Citrate-Tannin Reduction Method
The Study of Shrink Fit Design Empirical Formula
High Performance Cu-Based Friction Material Reinforced by Nanometer Materials
Hydrothermal Synthesis and Electrocatalytic Property for H2O2 Reduction of Co3O4 Nanocubes
Electrochemical Polymerization and Characterization of Poly(3-Methylthiophene) in Pure Ionic Liquids
Fabrication of Nanosheets and Micro-Spheres from the Self-Assembly and Polymerization of N-Octadecyltrichlorosilane
Determination of Optimal Cold Reduction Ratio and Annealing Process of High Plastic Stain Ratio Structural Cold Rolling Steel Sheets
Preparation and Test of Hierarchical a-Ni(OH)2 Flowers and Spheres
Growth of Nanostructure on Cu0.62Zn0.38 after SMAT during Thermal Oxidation
Study on Application of Nanosilica in Paper Coating
The Influence of Tin Ions on the Thermal Property of ß-FeOOH Nanorods
Constitutive Modeling of Nanocrystalline Materials with Shear Band
Effect of Grain Rotation on the Strain-Softening Behavior in Nanocrystalline Materials
Dispersion Investigation on Cobalt Blue in Organic Solvent
First-Principles Study of Triangle Terarylene as a Possible Optical Molecular Switch
The Changes of Hysteresis for Nanocrystalline BaTiO3 Ceramics at Different Impressing Rate of Voltage
Preparation of Microfibers with Multi-Hollow Structure by Co-Electrospinning
Synthesis of Hierarchically Porous ZSM-5 by Solvent-Evaporation Route
Low-Temperature Molten Salt Synthesis of NiWO4 Nanoparticles
Research on Preparation, Characterization of Novel Nano-ZnO
Finite Element Simulations of Crack Initiation in Ultra-Fined Polycrystalline under Cyclic Deformation
Comparative Study of Physicochemical Properties of Dragon’s Blood Powders
Study on Hydrothermal Synthesis of Flower-Sphere MoS2
Synthesis and Characterization of Polyacrylonitrile Microspheres by Soapless Emulsion Polymerization
Seed-Mediated Synthesis of one-Dimensional Fe3O4 Particles under Magnetic Field
Metal Alloy Materials
Effects of Strain Rate and Heat Treatment on the Tensile Property of 1Mn1Zn4Y Magnesium Alloy
Compressive Flow Behavior of AZ61 Mg Alloy at Elevated Temperatures
Effects of Element Yttrium on the Microstructure and Mechanical Properties of as-Cast Zn-25Al-5Mg-2.5Si Alloy
Rheological Constitutive Model Depending upon Temperature and Strain Rate of Sheet TC1 Titanium Alloy
Effect of Rotating Magnetic Field on Microstructure Evolution of Pb-Bi Alloys
Effects of Annealing Technique on Texture Attenuation of Hot-Rolling AZ31 Magnesium Alloy Sheets
Failure Analysis on Tee Joint Crack of Subcritical Power Station Boiler Final Superheater Header
A Study on the SCC Susceptibility of Twin-Wire Metal Inert Gas Arc Welds in 7A52 Al Alloy Plate
Study on CPM9V High Speed Steel Ring Prepared by Spray Forming
Oxidation and Melting Characterizations of AZ91D Granules during In Situ Melting
Influence of SiC Particle Size on the Wear Properties of SiC/Cu Composites
Study on the Super-Plastic Property of ECAPed Magmesium Alloy
Research of Aluminum Reduction Cell Thermal Balanced Intelligent Control System
Effects of Solidification Time on Porosity Content in A201 Aluminum Alloy Castings
An Investigation on a New Type of Fe-Ni Alloy in MIM Process
The Effect of PH on the Efficiency of Isoniazid as Corrosion Inhibitors of Brass in 3.0% NaCl Solution
High Temperature Salt-Fog Corrosion Behavior of a Ni-Based Super Alloy
Microstructure Refinement by Y2O3 in Semisolid A356 Alloy
Microstructure and Properties of Zn-Al Filler Metal Brazing Cu/Al Joint
Investigation of Gas Nitriding on Wear and Corrosion Behavior of 40Cr Steel
Smelting of Al-Li Alloy Containing High Li by Micro-Gravity Electromagnetic Force Simulation Facilities and Texture Study
Modeling of Cyclic Super-Elastic Behaviors of Shape Memory Alloy
Hot Deformation Microstructure and Mechanical Properties of Mg-Zn-Nd-Cd-Zr Alloy
Microstructures and Mechanical Properties of Mg-Al-Zn-Y Alloys
Effect of Cladding Material on Residual Stress in Quenched Aluminum Alloy Plate
Preparation of Semisolid A356 Al Alloy Slurry by Low Superheat Pouring and Weak Traveling-Wave Electromagnetic Stirring
Influence of Different Titanium Alloying Methods on the Microstructure and Wear Behavior of ZL108 Alloy
Modeling of Flow Stress for one New Kind of Metastable ß Titanium Alloy at High Temperature
Experiment Study on Disrepair Principle for the Waved-Edge Milling Insert with Complex 3D Grooves
Modeling and Experimental Study on Static Characteristic of BT Tool Holder-Spindle Interface
Oxidation Resistance of Co-10Cr-5Si Alloys in 1 Atm of Pure O2 at 700 and 800 OC
Regression Analysis and Determination of Activity Coefficients of Cd-Pb Alloy
Determination of Phase Transformation Point of New Type Ti-5Al-3.3V-8Mo-10Nb-1.0Zr-0.5Cr Alloy
Research and Implementation on Variant Design Based on Product Assembly Model
The Solute Redistribution during Solidification of Multi-Component Alloys
Calculation of Valence Electron Structure of Precipitate Phases in Al-Cu Cast Alloy
Negative Thermal Expansion of Tm2Fe15SiCr Compound
Modeling and Error Compensation of MEMS Gyroscope Dynamic Output Data within the Whole Temperature Range
Evolution of Microstructures and Mechanical Properties of Sr and Ca Containing Mg-4Al Alloy during Annealing Heat Treatment
Study on the Similar Creep Behaviors and Mathematical Laws of 1Cr18Ni9Ti under Low Stress Repeated Impact
The Study on Microstructure and Properties of a New Metastable Beta Titanium Alloy after Aging Treatment
An Adaptive Changeability Approach of Flow Path Feature in Hydraulic Manifold Blocks Design
Influence of Precipitate Phase on the Strain Rate Sensitivity of Mg-Gd-Y Alloy
Electrochemical Preparation of Ce-Mg-Ni Alloy Film in Acetamide-Urea-NaBr Melting System
Research on Corrosion Behavior of Fe-B Eutectic Alloy in Liquid Zinc
Distortion Analysis on Multipassed Butt Weld Using FEM and Experimental Study
Steel and Iron
Influence of Nitrogen Content on the Microstructure and Precipitate of the Medium-Carbon Vanadium Microalloyed Steel
Comparison of Crack Growth Models and Crack Closure Effect
Puncture Needle Production Process Intelligent Control System Based on Machine Vision
Study on Relationship of Abnormal Heat Treatment, Microstructure and Properties of P91 Steel
Effect of Rare Earth Elements on Corrosion Behavior of Low Carbon Steel in CSP
Effect of Prestrain on the Fatigue Crack Initiation life of X60 Pipeline Steel
Influence of Rapid Cooling Temperature on the Microstructure and the Mechanical Properties of a High Al Dual Phase Steel
Sintering Pot Test on Improving TiO2-Containing Ore’s Allocated Proportion
The Improvement of 13MnNiMoNbR Weld Strength and Low Temperature Toughness
Effect of Vanadium and Niobium on the Microstructure of Carbide Reinforced Indefinite Chilled Cast Rolls
Casting Low-Carbon Alkaline Agent of Tundish
Corrosion Study on X70-Carbon Steel Material Influenced by Soil Engineering Properties
Study on the Cleanliness of 316L Stainless Steel
Influence of Cooling Rate on the Microstructure of Bainitic Steel
Experimental Research on the Novel Process of Iron Ore Direct Reduction by Coal Gas
Research on Industrial Shape Meter and its Application
Shape Detecting and Shape Control of Cold Rolling Strip
Stress Field Numerical Simulation of the Inclusions in Large Rudder Arm Steel Casting
Microstructure Evolution and Precipitation Behavior of a High Nitrogen 15Cr Martensitic Stainless Steel during Tempering
A Study on Modified Maximum Force Criterion to Predict Forming Limit Curve of Stainless Steel Sheet
Two-Section Model for Adsorption of Tinidazole on Carbon Steel Surface in 3%HCl Solution
Mechanism of Work Hardening of Mn13 after Conventional Cold Rolling
Effect of Vanadium on Microstructure and Mechanical Properties of Air Cooled Medium Carbon High Silicon Bainite Steels
Research on Thermal Stress of Slab Heating Process Based on Transient Non-Linear Analysis
Influence of Annealing Temperature on Properties and Texture of High Strength IF Steel
The Effect of Co and Cu on the Creep Properties of High Chromium (12%Cr) Ferritic Steel
Effect of Nitrogen on the Impact Toughness of the Bearing Steel GCr15
Research on Temperature Changes and Microstructure Evolution of Steel Target after the Penetration by Copper Jet
Corroded Behavior of 310S Stainless Steel in Molten Al-Si Eutectic Alloy
Effect of Additives on Desulfurization Capability of CAS-OB Refining Ladle Slag
Comparison of Effects of B2O3 and CaF2 on Metallurgical Properties of High Basicity CaO-Based Flux
Fracture Images Classification Based on Fractional Cosine Transform and Markov Mode
The Effect of Quenching Media on the Microstructure and Mechanical Properties of SA508-3 Steel
Geometric Errors Sensitivity Analysis of Precision Vertical Machining Center Based on Multi-Body System Theory
Consistency Maintenance of Collaborative Product Design Based on the Semantics Reasoning
Exploration of Environmental Education on Campus-Huanggang River Watershed Protection in Case
Effects of Temperature on Corrosion Behavior of X70 Steel in Halons
Research on Product Knowledge Manipulation in KBE Application for Improving Product Design
Effect of Chemical Composition on Quenching Hardness of 1Cr17Ni2 Stainless Steel
Experimental Investigation of Static Characteristics of a Vacuum Preloaded Aerostatic Bearing
Study on the Interaction of Rare Earth (La) and Strontium with Titanium and Boron in the Al-Ti-B Based Master Alloy
Studying the Structure and Semiconductor Properties of Passive Film on 316SS by XPS and Capacitance Measurement
On the Dynamics of the Micro-Ring Driven by Traveling Bias Voltages
Formation Conditions for Ce2O2S and CeAlO3 in Cerium Treated Al-Killed Steels
Polymer Materials
Study o