Han Progress in Light Metals, Aerospace Materials and Superconductors

Erscheinungsjahr 2007
ISBN: 978-3-03813-110-6
Verlag: Trans Tech Publications
Format: PDF
Kopierschutz: 0 - No protection

E-Book, Englisch, 2420 Seiten

This immense 4 volume set comprises 495 peer-reviewed papers, divided into four parts: Magnesium (Part 1), Aluminum Alloys (Part 2), Aerospace Materials (Part 3) and Superconducting and Functional Materials (Part 4).

Autoren/Hrsg.

Han, Ya Fang

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde

Inhaltsverzeichnis

Committees
Preface
Symposium A: Invited Lectures
New Perspectives for Wrought Magnesium Alloys
Automotive Mg Research and Development in North America
State of the Art in the Refining and Recycling of Magnesium
Research and Development of Processing Technologies for Wrought Magnesium Alloys
Overview of CAST and Australian Magnesium Research
Development of Magnesium Alloys with High Performance
Symposium B: Cast Magnesium Alloys and Foundry Technologies
Effects of Microstructure and Partial Melting on Tensile Properties of AZ91 Magnesium Cast Alloy
Effect of Heat Treatment on the Microstructure and Creep Behavior of Mg-Sn-Ca Alloys
Creep Behaviour and Microstructure of Magnesium Die Cast Alloys AZ91 and AE42
Growth Rate of Small Fatigue Cracks of Cast Magnesium Alloy at Different Conditions
A Cyclic Stress-Strain Constitutive Model for Polycrystalline Magnesium Alloy and its Application
Dynamic Stress-Strain Behavior of AZ91 Alloy at High-Strain Rate
Microstructure Evaluate System of Semi-Solid Forming
Zr-Containing Precipitates in Mg-3wt%Nd-0.2wt%Zn-0.4wt%Zr Alloy during Solution Treatment at 540°C
Microstructure, Mechanical Properties, Creep and Corrosion Resistance of Mg-Gd-Y-Zr(-Ca) Alloys
Effects of Er on Microstructure and Mechanical Properties of Mg-Zn-Er-Zr Magnesium Alloys
Microstructure Simulation of Die Casting AZ91D Alloy
A Novel Squeeze Casting Process for Producing Magnesium Wheels
Effective Protection of Magnesium Melt Surface from Oxidation Using HFC125-Containing Shielding Gas
Development of a t-Type Mg-Zn-Al Alloy: An Investigation of the Microstructure and Solidification Characteristics
Ultrasonic Treatment of Magnesium Alloy Melts and its Effects on Solidification Microstructures
Microstructure Simulation of Magnesium Alloy
Effect of Sc on Microstructures and Corrosion Properties of AZ91
Microstructure of AZ91D in Different Treatment Conditions
Low-Cycle Fatigue Behavior of Three Die Cast Magnesium Alloys
Compression Deformation Behavior of AZ91D Magnesium Alloy in Semi-Solid State
Effects of CaCO3 Modificator on Microstructure and Mechanical Properties of Cast AZ91 Magnesium Alloy
Microstructure and Mechanical Properties of Mg-Gd-Sm-Zr Alloy
Mechanical Properties and Creep Behavior of Mg-Gd-Y-Zr Alloys
Microstructure and Mechanical Properties of Low Pressure Die Cast AM50 Magnesium Alloy
Tensile and Compressive Creep Behavior of Coarse-Grained Mg-Al-Sr Castings
Influence of Cooling Rates on the Dentrite Morphology and Hardness of the Surface-Chilled Mg-10Gd-3Y Magnesium Alloy
Effect of Si, Sr Additions on Microstructure and Mechanical Properties of AZ91 Alloy
Effects of Al-Sr Master Alloys on the As-Cast Microstructure of the AZ31 Magnesium Alloys
The Microstructure and Mechanical Properties of Mg-8Zn-8Al-4RE Magnesium Alloy
Effects of Aluminum Content on the As-Cast Microstructure and Mechanical Properties of Mg-xAl-0.7Si Based Alloys
Change of Inclusion and Mechanical Properties of Magnesium Alloy during Vacuum Melting
Effect of RE Content on the Fracture Behavior in Mg-Gd-Nd-Zr Alloys
Microstructure and Precipitates in Mg-Zn-Y Alloys
Study on Electromagnetic Vibration Casting (EVC) of Magnesium Alloys
Influence of RE on Microstructure and Mechanical Properties of Mg-Li-Al Alloys
Effects of Non-Flux Purification on the Microstructure and Mechanical Properties of AZ31+xCa Mg Alloy
A Constitutive Model for Casting Magnesium Alloy Based on the Analysis of a Spherical Void Model
Symposium C: Wrought Magnesium Alloys and Processing
Microstructures and Mechanical Properties of Mg-Li-Zn Alloys as Processed by ECAE
Microstructural Characterization and Mechanical Behavior of an Mg-9%Li-1%Zn Alloy
Effect of Grain Size on Necklace Formation of Magnesium Alloys
Elevated Temperature Mechanical Behavior of Mg-Y-Zn Alloys
Microstructures, Tensile Properties and Forming Process of AZ31 Alloy Sheets
Effect of Temperature on Microstructure and Texture during Compression of AZ31
Effect of Second Phase on the Mechanical Properties of Mg-Al-Zn Alloy by Equal Channel Angular Extrusion
Microstructure Evolution and Mechanical Properties of an AZ61 Mg Alloy through Cyclic Extrusion Compression
Effects of Extrusion on the Mechanical Properties and Damping Capacity of Mg-1.8Cu-0.5Mn Alloy
Fracture Mechanism Analysis of Mg-9Gd-4Y-0.6Zr Alloy
Annealing Behavior of the Compressed AZ31 Magnesium Alloy with Different Strain
Compressive Deformation of Cast AM60B Mg Alloy at Elevated Temperatures
The Experimental Research on the Formability of Stamping of Magnesium Alloy AZ31B Sheets
Thermo-Mechanical Coupled Simulation of Warm Stamping of AZ31 Magnesium Alloy Sheet
Experimental Research on Warm Deep Drawing of Magnesium Alloy Sheet by Variable Blank Holder Force Control
Numerical Simulation of Magnesium Alloy AZ31B Sheets with Thermal Deep-Drawing Process
Influence of Deformation on Precipitation and Recrystallization in an AZ80 Magnesium Alloy
A Preliminary Analysis on Compression Twins in Magnesium
Effect of Nd on Microstructures and Properties of AZ31 Wrought Mg Alloy
Mechanical Properties of Mg-8Zn-4Al-xCa Extruded Magnesium Alloy Tube at Elevated Temperature
Influence of Rolling Temperature on Microstructure and Tensile Properties of AZ31 Sheets
Effect of Second-Phase Particles on Grain Refinement of Mg-Al-Zn Alloy during ECAE
Effect of Cooling Rate on the Microstructure and Mechanical Properties of ZK60 Alloy
Microstructure and Mechanical Properties of Extruded Mg-Zn-Gd-Based Alloy Reinforced by Quasicrystals and Laves Phase
Development and Validation of Extrusion Limit Diagram for AZ31 and AM30 Magnesium Alloys
Warm Hydroforming of Magnesium Alloy AZ31 Sheets
Superplastic Behavior of an Extruded Mg-Zn-Y-Zr Alloy
The Fatigue Crack Propagation (FCP) Behavior of the Forged Mg-Zn-Y-Zr Alloy
Texture Evolution in Rolled Mg-13wt%Li-X Alloy
Annealing Process Optimization of a ME Wrought Magnesium Alloy
Effects of Homogenization on the Formability of ZM21 Alloy
Status and Development of Magnesium Alloy Thin Strip Casting
Rolling of AZ31 Magnesium Alloy Thin Strip
The Influence of Zinc and Zirconium on the Microstructure of the As-Cast Magnesium Alloy ZK60
Hot Compression Deformation Simulation of AZ61B Magnesium Alloy
Effect of Rolling and Annealing on the Mechanical Properties and Microstructure of AZ31 Magnesium Alloy
Study on Solidification Microstructure of AZ31 Alloy Strips by Vertical Twin Roll Casting
Superplastic Forming Limit and Instability of AZ31B Sheet
Effects of Zn on Mechanical Properties of MZK60 Wrought Alloy
Phase Analysis of Al-Mn Compounds in the AZ Magnesium Alloys
Microstructures and Mechanical Properties of AZ31B Extruded Sheets from Different Casting Processing
Effect of Hot Extrusion, Hard Drawing and Heat Treatment on Properties and Structure of MB5B Wrought Mg Alloy
Effect of Temperature and Relative Humidity on Fatigue Crack Propagation Behavior of AZ61 Magnesium Alloy
Effect of Nd and Y Addition on Microstructure and Mechanical Properties of Extruded Mg-Zn-Zr Alloy
Symposium D: Other New Mg-Based Materials and Technologies
Diffusion Bonding of Magnesium, Zirconium and Titanium as Implant Material
Investigation on the Potential of Magnesium Alloy AZ31 as a Bone Implant
Aging Behavior of Mg-9Gd-4Y-0.6Mn Alloy
Preparation of Amorphous Mg-Ni Alloy by Mechanical Alloying and Investigation on its Hydrogen Storage Properties
Study on the Microstructure and Mechanical Property of High Strength Mg-Nd-Zn-Zr Alloy
On the Infiltration of Fiber Reinforced AZ91D Alloy
The Cathodic Reduction Processes of SiO2 Impurity in Magnesium Electrolysis
Expulsion in Resistance Spot Welding of AZ31B Magnesium Alloy
The Thermodynamics Calculation of Mg-Zn Alloy
A Database Prototype of Magnesium Alloy Based on Internet
Microstructure and Electrochemical Properties of Mg2Ni Substituted by Al, Ti
Biocompatibility Evaluation of Magnesium-Based Materials
Preparation of Mg-Sr Alloys Using Vacuum Reduction: A Thermodynamics Approach
Study on the Process and Mechanism of Rolling-Bonding between Magnesium and Aluminum
Nickel Foam Reinforced AZ91 Magnesium Alloy
EXAFS Study of Annealing Effects on Mg65Cu25Gd10 Metallic Glass
Interaction between Carbon Nanotube and Mg Surface: Ab-Initio Investigation
Mechanical Behavior of Gas Tungsten Arc Surface Modified Composite Layer on Mg Alloy AZ31 with SiCp and Aluminum
Intermediate Phase Growth of Mg-Al Diffusion Couple under a Strong Static Magnetic Field
Application of G-L Dislocation Model in Low Frequency Damping Capacities of AZ91D and SiCw/AZ91D Composites
Processing, Microstructure and Mechanical Properties of SiCp/AZ91 Mg Matrix Composites Fabricated by Squeeze Casting
Microstructure and Mechanical Properties of New Particle-Disperse-Reinforced Mg Composite Mg- 6Al- 3B2O3- 1NaCl- 1CaCl2
Measurement of Press Creep Stress Exponent of ZM6 Alloy at Room Temperature

Symposium E: Magnesium Corrosion and Surface Engineering
Surface Modification of AZ91 Magnesium Alloy
Magnesium Films Deposited on Different Substrates via Arc PVD Method
Corrosion Protection of Joining Areas in Magnesium Die-Cast and Sheet Products
Effects of Post Heat Treatment on the Interfacial Characteristics of Aluminum Coated AZ91D Magnesium Alloy
Effect of Aging on Electrochemical Behavior of T6-Treated WE54 Mg Alloy
In Situ Observation of Initial Corrosion of AZ91 Alloy with Residual Stress in Wet-Dry Conditions Using Environmental Scanning Electron Microscope
Growth and Microstructure of Microarc Oxidation Coating on Al18B4w/AZ91 Mg Matrix Composite
Effect of Pulsed High Energy Electron Beam on Surface Modification of AZ91 Magnesium Alloy
Ion Implanted AZ31 Magnesium Alloy
Rare Earth Conversion Coating of Magnesium Alloy AZ91D
Effect of Heat Treatment on Corrosion and Electrochemical Behaviors of Mg-3Nd-0.2Zn (wt.%) Magnesium Alloy
Effect of CeCl3-Containing Flux on Microstructure and Mechanical Properties of Mg Alloy Containing Rare Earth
Effect of Strontium on Mechanical Properties and Corrosion Resistance of AZ91D
Application of Electrochemical Techniques to Characterization of the Corrosion Behaviors of GW63 Alloys
A Comparison on Ceramic Coating Formed on AM50 Alloy by Micro-Arc Oxidation in Two Electrolytes
Characteristics of Acoustic Emission during Fatigue of As-Rolled AZ31B Magnesium Alloy
Comparison of Coating Properties by Two Pulse Modes on Magnesium Alloy
Establishment of a Model of Growing Anodizing Film on AZ91D Mg Alloy
Zn Coatings on AZ91D Magnesium Alloy Prepared by Electroplating from the Electrolyte Containing SnO2 sol
Study on Phosphating on the Magnesium Alloys
Surface Modification of Magnesium with Rare Earth Conversion Films for Biomedical Protection
Alloy and Composites Development
Fluidity Evolution of an Al-10%B4C Metal Matrix Composite
Effect of Mg Content in Matrix on Infiltration Height in Producing MgO/Al Composite by Vacuum Infiltration Method
Modification of A3003 Alloy for Development of High Toughness Al Alloy Tube
Effect of Si on As-Cast Microstructure in Quasicrystalline Al-Cu -Fe Alloy
Study on the Erbium Strengthened Aluminum Alloy
Microstructural Evolution in Al-Sc and Al-Sc-Zr Alloys
Damping Properties of 6063Al/Al2O3 SiO2 Particle Reinforced Composites
Microstructures and Dynamic Compression Properties of a High Reinforcement Content TiB2/Al Composite
Interfacial Reaction in Al Matrix Composites Reinforced by Mg Borate Whisker
Effect of Silicon Addition and Thermal History on the Thermal Expansion Behavior of SiC/Al Composites
The Influence of Interfacial and Structural Parameters on the Elastic Modulus of SiCp/6066Al Composites
Microstructural Characterization of Sprayed Aluminum Matrix Composites Reinforced by SiC Particles
Effect of Current Density on Morphology and Corrosion Resistance of Anodized Coating on SiCp/2024 Al Composite
Casting Solidification Deforming Joining and Processing
Effects of Temperature on the Weldability of Powder Metal Parts Joined by Diffusion Welding
Microstructure and Performance in Diffusion Welded Joints of Al +5-10-15% WCp Composites
Application of Microstructure Sensitive Design to FCC Polycrystals
Coating Effect on Increasing Mechanical Property of 6061-T651 Alloy by Laser Shock Processing
Numerical Analysis of Nano- or Micro-Crystalline Materials during ECAP by Dislocation Evolution Method

Low-Frequency Electromagnetic Field Influencing Horizontal Direct Chill Casting of Aluminum Alloy Rods
New Method and Experimental Study for Fast Evaluating Filling Mould Ability of Al-Si Alloy by Surface Tension
Prediction of Fracture in Square-Cup Forming of Aluminium Alloy
Numerical Modeling of Low Frequency Electromagnetic Casting of 7XXX Aluminum Alloys
Micromechanism of Plastic Deformation on Elastic Modulus
Homogenization Treatment of an Al-Li-Cu-Mg-Mn-Zr Alloy
Influence of Pulse Electric Current on Solidification Structures of Al-Si Alloys
Rheological Behavior and Thermo-Mechanical Coupling Analysis of Aluminum Continuous Roll Casting Process
Numerical Simulation on Conform Process of Aluminum Alloy Rectangular Hollow Conductor
3-D Coupled Fluid-Thermal Finite Element Analysis of 3C-Style Nozzle’s Fluid Field of Al Roll-Casting
Friction and Wear Properties of Friction Stir Welds of 5052 Al Alloy
Hot Deformation Behavior of 2519 Al Alloy during Isothermal Compression
Microstructure and Grain Refining Performance of a Rapidly Solidified Al-5Ti-1B Master Alloy
Microstructures, Textures and Properties
Effect of Calcium Addition and Heat Treatment on the Al-Zn-In Alloys as Sacrificial Anode
Accumulative Roll-Bonding (ARB) of Sheets of Aluminium and its Commercial Alloys AA8006 and AA5754 at Ambient and Elevated Temperatures
Overview of Recent Work on Precipitation in Al-Cu-Mg Alloys
Correlation of Mechanical Properties with Defect Structure in Commercial Pure Al and Al-Mn Alloys Studied by Positron Annihilation Spectroscopy
Morphological Changes and Plume Deflection Effect during Pulsed Laser Ablation Deposition of Al
Microtexture Development and Flow Stress Saturation during Triaxial Forging of an Al-3Mg-Sc(Zr) Alloy
Removal of Na and Ca from Aluminum Scrap through Filtration
Evolution of Micro-Textures within Individual Grains in Rolled Polycrystal Aluminum
Investigation of Inhomogeneous Deformation on Meso-Scale with Crystal Plasticity Finite Element
Atomic Bonding and Properties of Al-Li Alloy in Earlier Ageing Stage
Study of Cu Addition on Precipitation Behaviors and Mechanical Properties in AA6082 Al-Mg-Si Alloy
Effect of a Si Additive on an Al Grain Boundary: A First-Principles Investigation
Numerical Simulation on Influence of Clearance and Friction on Wrinkling in Bending of Aluminum Alloy Rectangular Tubes
Small Angle X-Ray Scattering Study in Equal-Channel Angular Pressed 7055 Al Alloys
Effect of Cryogenic Treatment on Mechanical Properties and Microstructures of 3102 Al-Alloy
Influence of Ageing Treatment on Microstructure and Properties of 7150 Alloy
Effect of Second Phases on Tensile Property in Artificial Ageing and RRA Process of Super-High Strength Aluminum Alloy
Effect of Minor Sc and Zr on the Fatigue Properties of Al-Mg-Mn Alloy
Aging Characteristics of 7A52 Al-Zn-Mg Alloy
Structure and Property of Nickel-Modified Ultrahigh Strength Al-Zn-Mg-Cu Alloy by Spray Forming
Optimizing Solution Heat Treatment to Improve Mechanical Properties of Al Alloy 7055
Prediction of Hardness of Aluminum Alloy 7055 by Quench Factor Analysis
Shear Pressing for Grain Refinement of Al-Mg-Li Sheet
Particle-Stimulated Nucleation of Recrystallization for Grain-Size Control in 01420 Al-Li Alloy
3D FEM Simulation of Void Growth in Aluminum Single Crystals
Effect of Trace Element Er on Al-Mg and Al-Mg-Mn Alloys
Investigation on Wear Resistance of Al-Si-Ti Piston Alloys Produced by Electrolysis
Cracking Susceptibility and Joint Property Study of the 6061 Aluminum
Grain Refinement of an Al-Cu-Mg Alloy by Microalloying and Common Thermo-Mechanical Treatment
Effects of Electromagnetic Pump Casting on Microstructure and Mechanical Properties of ZLSi9Mg Casting Aluminum Alloy
Microstructure and Thermal Stability of Al-Mg-Mn Alloys by Equal Channel Angular Pressing at Elevated Temperature
Morphology and Distribution of in Al-Fe Alloy under an Alternating Magnetic Field
Effects of Titanium Refining Methods on the Microstructure and Mechanical Properties of A356-0.1%Ti Alloys
Alloying Behavior of Rare-Earth Er in Al-Cu-Mg-Ag Alloy
Modifying Effect of Al-Ti-C-P Master Alloy on Hypereutectic Al-Si Alloy
Effect of Low Frequency Electromagnetic Field on Microstructures and Macro-Segregation of Direct Chill Casting Al-19.2%Si Alloys
Through-Thickness Microstructure, Texture and Strength Gradients in AA 7055 Rolled Plate
Influence of Scandium on Microstructures and Mechanical Properties of Al-Zn-Mg-Cu-Zr Alloys
Evolution of Flow Stress and Microstructure in an Al-Zn-MgSeries Alloy during Hot Deformation
Effect of Extrusion Temperature and Rate on Formability and Microstructure of 7075 Aluminum Alloy
Characterization of Precipitation in Al-Zn-Mg-Cuand Li Containing Al-Zn-Mg-Cu Alloys after Isothermal Aging
Observation of As-Cast Microstructure Feature of Al Sheet Used for Can Manufacturing with High Forming Properties
Metallographic Characterization of Porosity in A Cast Aluminum Alloy A356-T6
Microstructures and Mechanical Properties of an Al-Cu-Li-Mg-Zr Alloy Containing Zn and Mn
Effects of High Gradient Magnetic Fields on Solidified Structures of Non-Magnetic Metals with Different Susceptibilities
Correction of Ghost in Reduced ODF with Particle Swarm Optimization Algorithm
HRTEM Analysis of Aging Electrolytic Low-Ti Al Alloy
Effect of Yb Additions on Microstructures and Properties of High Strength Al-Zn-Mg-Cu-Zr Alloys
The Effects of Thermo-Mechanical Treatment on the Properties of 2519 Aluminum Alloy
Characters of Coarse Grains Subdivisions in Rolled Polycrystalline Al
Microstructural Evolvement of Al-1.5Si-1.1Mg-0.5Cu Alloy Ingot during Homogenization Treatment
Performance of Electromagnetic Purification System in Continuous Twin Roll Casting of Aluminum Sheet
Microstructure Inhomogeneities in 2519A Aluminum Plate Penetrated by an Incendiary Projectile
Magnetically Aligned Al3Ni Phase in Al-Ni Alloys Solidified with a High Magnetic Field
Dynamic Recrystallization of 3104 Aluminum Alloy during Isothermal Compression Deformation at Elevated Temperatures
Investigation of Flow Stress Behavior and Microstructural Evolution of 7050 Al Alloy
Influence of Zr on the Microstructure and Mechanical Properties of an Al-Zn-Mg-Cu Alloy
Tensile Properties of Large Extrusion and Forgings of RS P/M Al-9Fe-1.9Mo-1.7Si Aluminum Alloy
Study on Microstructural Evolution and Age Hardening in High-Purity Al-Cu-Mg-Ag Alloy
Flow Field and Gas-Bubble Size Analysis in Water Model for the Process of Aluminum Melt Degassing by Particle Image Velocimetry
Surface Modification and Corrosion
Corrosion Behavior of Metallic Materials in Ethanol-Gasoline Alternative Fuels
Structural Characterization and Corrosion Properties of BTESPT Silane Films on Surface of 2024-T6 Aluminium Alloy
Effect of Pre-Rolling Reduction on Intergranular Corrosion of Aluminum Alloy 2519A
Influence of the Nickel on the Corrosion Behavior of Al-Mg-Sc-Zr Alloy
Thermal Stability of Nanocrystallized Surface Layer in Al-Zn-Mg Alloy by Surface Mechanical Attrition Treatment
Surface Morphology and Discharge Channel Temperature Estimation of PEO Ceramic Coatings on Aluminum
Effects of HTCA on Microstructure and Surface Morphology of Porous Anodic Alumina Membrane
Structure and Properties of Microarc Oxidation Films on Zinc-Containing Aluminum Alloy
Anti-Oxidation and Anti-Corrosion Properties of Al-Si Metal Anodes
Corrosion Behavior Improvements of High Active Aluminum Alloy Anode in Alkaline Solution by Adding Inhibitors
Exfoliation Corrosion Behavior of 2524 Aluminum Alloy
I. Superalloy
Liquation Cracking in Heat Affected Zone in Ni Superalloy Welds
The Future of Commercial Air Transport and Aeroengines: Challenges and Opportunities
French Research and Development Activities on High-Performance Superalloys for Gas Turbine Components
Atomic Partitioning of Platinum and Ruthenium in Advanced Single Crystal Ni-Based Superalloys
Effect of Ru on Microstructure of a Single Crystal Nickel-Base Superalloy
Effects of Ru Additions on the Microstructures and Stress Rupture Life of a Directionally Solidified Ni-Based Cast Superalloy
Influence of Ru and Cr on the Heat-Treated Microstructure of Ni-Based Superalloys
Dislocation Deformation Mechanisms during Fatigue of the Nickel-Based Superalloy CMSX-4
Temperature Dependence of High-Cycle Fatigue Behavior of a Ni-Base Single Crystal Superalloy
Microstructure Evolution and Strain Features of a Single Crystal Nickel Base Superalloy during Tensile/Compression Creep
Surface Recrystallization and its Effect on Rupture Life of SRR99 Single Crystal Superalloy
Precipitate Free Zones along Recrystallization Grain Boundaries during Creep in a Directionally Solidified Superalloy
Influence of Aging Temperature on the Microstructure and Stress Rupture Property of DZ951 Alloy
Effect of Temperature on Formation of Borides in TLP Joint of a Kind of Nickel-Base Single Crystal Superalloy
Stress Rupture Properties of the Second Generation Single Crystal Superalloy DD6 after High Temperature Exposure
Isothermal Oxidation Behavior of Ni Base Superalloy DM02 for High Temperature Dies
Effect of Alloying Elements o