Selected, peer reviewed papers from the 2014 5th International Conference on Mechanical and Aerospace Engineering (ICMAE 2014), July 18-19, 2014, Madrid, Spain
Buch, Englisch, 834 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1540 g
ISBN: 978-3-03835-223-5
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface, Committees and Sponsors
Chapter 1. Applied Mechanics and Manufacturing
On-Machine Measurement System Implemented Based on Fanuc CNC System Using a Touch Trigger Probe
Evaluation of the Fatigue Linear Damage Accumulation Rule for Aeronautical CFRP Using Artificial Neural Networks
Study on Water Cushion Belt Conveyor
A Game Theoretic Analysis on Cloud Manufacturing Model
Study the Effect of CaCO3 Nanoparticles on the Mechanical Properties of Virgin and Waste Polypropylene
Contact Pressure Distribution in Joints Formed by V-Band Clamps
Determining a Robust, Pareto Optimal Geometry for a Welded Joint
Application of Peridynamic Theory to Nanocomposite Materials
Application of Shainin Design of Experiment Method on Metal Turning Operation
Study of a W-Beam Guardrail Behaviour in Road Safety Barriers
Analysis of the Torsional Load Capacity of V-Section Band Clamps
Characterization and Modeling of Ladle Teeming Process
Modeling and Analysis of Kinetic Characteristics of a Gear-Linkage Mechanism
Study on Spring-Back Effect with Various Temperature of Magnesium Alloy in Roll Forming Process
Influence of MoN Sputtering Coating on Wear Resistance of a Fishing Net-Weaving Machine Component
On Approximation of Reserve Factors Dependency on Loads for Composite Stiffened Panels
Improving the Mechanical Properties of a Machine Component of a Fishing-Net Weaving Machine by Duplex Coating
Mechanical Performance Analysis of Composite Scarf Joints with Debond Flaw
Compressive and Shearing Mechanical Anisotropy of Aluminum after ECAP
Constitutive Models for Uniaxially-Post-Buckled Square Lattices
Surface Morphology and Deformation Mechanism of Single Crystal Copper Treated by Laser Shock Peening
Quasi-Static Compressive Properties of Aluminium Foams with Functionally Graded Properties
Prediction of Long-Term Compression Strength for Quasi-Isotropic CFRP Laminates
Numerical Modeling to Determine Test Conditions of Shear Blanking Test for a Hybrid Material
Mechanical Characteristic Changes of Carbon Fiber Reinforced Plastics (CFRP) Depending on the Lamination Methods
Effects of Number of Inserts and Insert Materials on Surface Roughness of Cast-Iron Work Produced by Face Milling
A Study on the Tensile Strength and Thermal Property of CFRP Using Infrared Thermography Camera
A Comparative Study on the Hardness of CrN, CrC and CrCN Coatings
Comparison of Analytical Models of Force Prediction during Dynamic Bending Stage for 3-Roller Conical Bending Process
Numerical Simulation of Compressive Response of Open-Cell Aluminum Foams
Taguchi Optimization of Process Parameters in Friction Stir Spot Welding of AA5754 and AA2024 Alloys
CNC Processing of Nurbs Curve Based on AutoCAD
Multi-Objective Optimization of CNC Turning Machining Parameters
Effect of Powder Flow Rate and Gas Flow Rate on the Evolving Properties of Deposited Ti6Al4V/Cu Composites
Chapter 2. Dynamics, Vibration and Acoustics Analysis
A Simplified Finite Element Riveted Lap Joint Model in Structural Dynamic Analysis
A Novel Technique for Dynamic Analysis of Beam-Like Structures on Tensionless Elastic Foundations Subjected to Moving Loads
Simulation of Sinusoidal Vibration Control Algorithm Based on Hydraulic Vibration Table
Research on the Water-Based Hydraulic Vibration Test-Bed
Vibration Analysis of Four-Edge Clamped Plain Weave Composite Plates with Different Impact Damage Patterns: An Experimental Study
Numerical Model for Prediction of Cutting Forces in a Vibratory Drilling Process
Dynamics Characterization of Missiles with Control Flaps Based on CFD
Rigid-Flexible Coupling Dynamics Analysis for a Twin-Rotor Piston Engine
The Approach to the Noise and Vibration Management in the Power Products Design
The Specification of Unknown Force within Dynamic Analysis of Slider Crank Mechanism by Three Various Access
Importance of Enclosed Gas for Modal Analysis of Space Inflatable Structure
Early Diagnosis of Spalling in the Gear Teeth
Acoustic Optimization Design Method of Gear System
Near-Field Beamforming Source Localization for Gear Transmission in a Semi-Anechoic Room
Heterogeneous Speech Prediction Using LDA Classifiers
Ultrasonic Sonic Imaging for a Two Phase System Based on Support Vector Machine Classifier
Experimental Validation of the Modified Continuously Variable Command Law of a Semi-Active Suspension Integrating a Magneto-Rheological (MR) Damper
Preliminary Model Analysis of Acoustic Noise Levels for Space Station
Research of Human Modeling and Motion Simulation Based on ADAMS
Static and Dynamic Tensile Behavior of Unidirectional Glass/Epoxy Composites
Chapter 3. Material Characterisation and Technology
Influence of Power on the Microstructure and Optical Properties of Microcrystalline Si Films
Comparative Evaluation of Activated Carbons Prepared by Thermo-Chemical Activation of Lignocellulosic Residues Aiming at Phenol Removal
Corrosion of Reinforcing Bars Astm A706 in Self-Compacting Concrete Subjected to Chloride Attack and Carbonation
Tribocorrosion Behavior of [Ticn/Tinbcn]n Coating on Austenitic Steels Substrate in Hanks' Balanced Salt Solution
Evaluation of Oven and Microwave Drying of Ceramic Material with Adition of Quartzito to Form a Composite
The Role of Vanadium in Reduction of Helium Diffusion in Tungsten Based Alloys
Investigation of Solid Solubility, Hardness, and Thermal Properties of Au-Ge-Sb System
Experimental and Numerical Analysis Applied on Steel Bars Cooling
Chapter 4. Aerodynamics, Aeroengineering and Aerospatial Applications
Low Speed Aerodynamics of Drogue System Refueling of Unmanned Aerial Vehicles
Aerodynamic Performance of Blended Wing Body Aircraft with Distributed Propulsion
The Effect of Gust on Blended-Wing-Body Civil Aircraft
Parametric Aircraft Design Optimisation Study Using Span and Mean Chord as Main Design Drivers
Wind Tunnel Study on a Missile with Forward-Facing Cavity in Supersonic Flow
High Swept-Back Delta Wing Flow
A SMA Based Morphing Leading Edge Architecture
Vacuum Degree Measuring Technique and its Development Tendency inside a Satellite in the Thermal Vacuum Test
The Synthesis of the Robust Stabilization System of Cable Tension for the Test Bench of Weightlessness Simulation
Aerodynamic and Performance Analysis of Representatives of One Century of Low Speed Aircraft
Building Data Fusion Surrogate Models for Spacecraft Aerodynamic Problems with Incomplete Factorial Design of Experiments
Application of Rare Event Anticipation Techniques to Aircraft Health Management
Estimation Mass of the Aircraft Wing with the Multidisciplinary Process
Improvement Design of the Insulation Structure of High Temperature Pneumatic Duct System of the Aircraft
Airborne Sensor Model Position Fidelity Determination for Combat Aircraft Simulators
Design and Development of Vertical Takeoff and Horizontal Transition Mini Unmanned Aerial Vehicle
Study on Serial MPPT Electrical Power System Stability for Space Application
Analysis of Orbital Thermal Environment for Inclined-LEO Small Satellite
State-Space Rotor Aeroelastic Modeling for Real-Time Helicopter Flight Simulation
Flight Loads Analysis of a Maneuvering Transport Aircraft
Effect of Reduced Frequency on Longitudinal Oscillatory Derivatives of an Airfoil Based on Wind Tunnel Data
SOA-Cloud Computing Based Fast and Scalable Simulation Architecture for Advanced Flight Management System
Effect of Radiation Induced Charge Neutralization on ELDRS
Using Low Temperature Irradiation for ELDRS Estimation
Numerical Experiment of a Symmetrical Airfoil with Attack Angle of 5 Degrees in Fluctuating Relative Flow Velocity
Research on Numerical Simulation of Support Interference for Dynamic Derivatives at Hypersonic Flight Speeds
Numerical Simulation of Powered High-Lift Flow
Analysis of an Airdrop Motion Coupling N-S Equations with 6 DOF Motion Equations
Best Attack Position Model for BVR Multi-Target Air Combat
Analysis of an Aero-Engine Gas Path Fault Monitoring Sensor Model
On the Physical Mechanism of the Interaction of the Microwave Radiation with the Semiconductor Diodes
Chapter 5. Fluid Dynamics and CFD Application
Aeroacoustics Investigation of an Automotive Exhaust Muffler
Assessment of Real Gas Effects on Approximate and Boundary Layer Equations for Hypersonic Laminar Flow over Axisymmetric Bodies
Computational Studies of Turbulent Flows in Rotating Radial and 200 Backward Swept Diverging Channels
On the Unsteady Flow of Two Incompressible Immiscible Second Grade Fluids between Two Parallel Plates
CFD Modeling and Design of Wind Boosters for Low Speed Vertical Axis Wind Turbines
Investigation and Simulation of Supersonic Gas Jet for Martian Dust Removal
Analysis of Variable Viscosity Channel Flow under Constant Magnetic Field via Generalized Differential Quadrature Method
Modeling and Simulation of Supersonic Flow in 2D Nozzle Using MacCormack’s and Upwind Methods
Chapter 6. Motors and Engines, Combustion and Propulsion
The Simulation Calculation of Temperatures on Valve Seats of Combustion Engine and its Verification
Numerical Studies of Engine Performance, Emission and Combustion Characteristics of a Diesel Engine Fuelled with Hydrogen Blends
Study on Flame Spread over Aviation Kerosene and Diesel
Investigation of Syngas Combustion at Variable Methane Composition in Can Combustor Using CFD
Investigation of Engine Performance and Emission Characteristics of Si Engine Fuelled with Ethanol Blends by Numerical Simulation
Investigation of Effects Ofinlet Boundary Conditions on the Flow Behaviour in a Diesel Injector
Design of System Hydrogen Engine Supercharging
Description of Sequences of Rhythmic Motor Primitives
Numerical Analysis of Tumble, Cross Tumble and Swirl Ratios in a Single Cylinder Research Engine
Sensitivity Analysis of the Air Flow inside a Single Cylinder Engine for Different Turbulence Models Using CFD
Modeling and Analysis on Mean Effective Torque of Rotors in Twin-Rotor Cylinder-Embedded Piston Engine
Numerical Analysis of the Flow Field in the Nozzle of Hot Water Rocket Motor
Optimization Design for Contour of Pintle Nozzle in Solid Rocket Motor Based on Response Surface Method
Chapter 7. Control Systems, Robotics and Automatics
Cooperative Tracking Control for Formation Keeping of Fractionated Spacecraft Based on Error Exchanging
Assessment of a General Aviation Pilot Assisting System Influence on the Piloting Performance and Safety of Inexperienced Pilots
The Simulation of Rotor Field Oriented Control of PMSM
Real-Time Monitoring of Harmonic Currents: A Case Study of a Shopping Center
Design and Non-Linear Simulations of a Fault-Tolerant Flight Control
A Hybrid Control Model to Develop the Trajectory-Tracking Controller for a Quadrotor UAV
A Novel Approach to Model and Implement Planar Trajectory-Tracking Controllers for AUVs/ASVs
Validation of Numerical Simulation Method for Active Flow Control Technology
Symbolic Trajectory Description Using Frescoes
Gait of a Biped Robot Implemented on a FPGA
Modelling and Comparison of Compressor Performance Parameters by Using ANFIS
Robotic Vision for Hospital Inspection
Gas Turbine Fault Detection and Isolation Using Adaptive Neurofuzzy Inference System (ANFIS)
Kinematic Analysis for Hybrid 2-(6-UPU) Manipulator Using Wavelet Neural Network
Chapter 8. Thermal Analysis Technologies and Applications
Measurements of Thermal Properties of Different Building Materials
Three-Dimensional Numerical Simulation of Mixed Convective Heat Transfer in a Horizontal Rectangular Duct Utilizing Nanofluids
Heat Transfer Enhancement in Turbine Blade Internal Cooling Ducts
Comparative Study between a Heat Pump and an Electrical Resistance as Energy Support for a Solar Water Heater
Analysis of the Temperature Evolution during Lined Pipe Welding
Calculation of Heat Transfer in Heterogeneous Structures such as Honeycomb by Using Numerical Solution of Stochastic Differential Equations
A Numerical Study of the Thermal Critical Component on FORMOSAT-7 with Phase Change Material
Application of Differential Quadrature Method (DQM) to Heat Transfer and Entropy Generation Problems
Evaluation of Correlations for Natural Convection on the Behavior of a Wire-on-Tube Condenser
Chapter 9. Computational Techniques and Numerical Methods
RETRACTED: Hybrid Hidden Markov Models and Neural Networks Based on Face Recognition
Nonlinear Fuzzy Robust PCA Algorithm for Pain Decision Support System
Buckling and Post-Buckling of Composite Shells with Asymmetric Meshing in Form of Axial Band in Numerical Model
Guidance Solutions for Multiple Vehicle Assembly
Stochastic Models in Preventive Maintenance Policies
Infant Pain Recognition with Homomorphic Filter and k-NN Classifier
Study on Improving the Degree of Size Precision of Rack Tube
A Numerical Study Onfire Suppression of Water Mist in Microgravity
BicriteriaHeuristic for Unrelated Parallel Machine Scheduling Problem
