Mandal / Öveçoglu Euro Ceramics VIII
Erscheinungsjahr 2004
ISBN: 978-3-0357-0632-1
Verlag: Trans Tech Publications
Format: PDF
Kopierschutz: 0 - No protection
E-Book, Englisch, 2700 Seiten
ISBN: 978-3-0357-0632-1
Verlag: Trans Tech Publications
Format: PDF
Kopierschutz: 0 - No protection
Volume is indexed by Thomson Reuters CPCI-S (WoS).
Comprising more than 600 papers, the aim of this 3-volume set is to provide the reader with a comprehensive overview of current trends in all aspects of the research and development of ceramics. It is therefore an excellent reference source for any researcher working in the field.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Foreword
Synthesis of Oxide Nanocomposite Particles by Reactive Spray Pyrolysis
Some Current Processing Issues in Barium Titanate Powders
Grain Morphology Memory: Yttria as a Study Case
Effects of Positive Ionic Radius on the Phase Transition of Titania Nano Powders from Aqueous TiOCl2 Solutions
Silicon Carbonitride Nanopowders by Laser Pyrolysis for Plastic Nanocomposites
Reactivity of AlN Powder in an Aqueous Environment
Solid-State Synthesis of Pb2Sr2CaCu3-ySx and Conducting Properties
Synthesis and Reactions Behavior of Calcium Zirconate/Magnesium Oxide from Natural and Synthetic Raw Materials by Neutron Thermodiffractometry
Homogeneous Precipitation of Layer Double Hydroxides
Novel Powder Processing of Sintered Boron Carbide
Preparation of TiN-Based Nitride Composite Films from Alkoxide Solution by Liquid Injection Thermal Plasma CVD Method
Low Temperature Synthesis of Spinel Powders by Mechanical Grinding
A Study of Phase Migration during Extrusion
Colloidal Processing of Laminates in the System Alumina – Titania
Effects of Mechanical Treatment on the Formation of a-Al2O3 from Gibbsite
Application of Enzymes and Flocculants in Ceramic Processing of Alumina
Ceramic Powder Dry Compaction Under Powerful Ultrasound Action
Characterization of Surface Condition of Non-Oxide Ceramic Powder by Heat of Immersion
Investigation of the Formation of Cristobalite from the Quartz-Natural Zeolite Mixes at Low Temperature
MA-SHS of ZrC and ZrB2 in Air from the Zr/B/C Powder Mixtures
Mechanochemical Synthesis of WC Powders by Mechanical Alloying
Nano-Engineering and Catalytic Properties of Zirconia – Noble Metals Composite Powders
Particle Orientation of Alumina Green Body Made by Slip Casting
Preparation of Hollow Alumina Microspheres by RF Thermal Plasma
Production of Aluminum Nitride Powders from Seydisehir Aluminum Hydroxide
Surface Modification of Ultrafine Ceramic Powders by Low Temperature Plasma Polymerization
Impedance Spectroscopy for Non Destructive Characterisation of Ceramic Compacts
Investigation of Parameters Affecting Formation of Mullite from Kaolin
Thermodynamic Analysis of Mo2C Powder Synthesis by Chemical Vapor Reaction Method
Water Thinnable Polymeric Binders in Die Pressing of Alumina
Formation of BaTiO3 Fine Particles in Aqueous Solution: Experiments and Modelling
Low Temperature Rapid Synthesis of Spinel Lithium Manganese Oxide Fine Particles by Microwave Heating
Dispersion Stability of Ferrite Slurry in Water Mixed Medium System
Synthesis of Highly Concentrated Silver Nanoparticles Assisted Polymeric Dispersant
Influence of Hydrothermal Method on the Aluminum Titanate Synthesis
Controlled Ceramic Powder Compaction Through Science-Based Understanding
The Strength of Wet Ceramic Green Bodies during Gelation for the Temperature Induced Forming (TIF) Suspensions
PAA-PEO Comb Polymer Dispersants for Colloidal Processing
Guidelines for the Scale-Up of an Aqueous Ceramic Process: a Case Study of Statistical Process Control
Tailored Microstructures by Multi-Component Pressure Filtration
Aqueous-Based Alumina Tape Casting for 3-Dimensional Forming
Tape Casting of Functionally Graded AlN-SiC-MoSi2 Composites
Injection Moulding of Alumina and Titania Powders and Production of Aluminum Titanate
Forming of Ceramic Coatings by Dipping and EPD Through Carrageenan Gelation
Characterization of Internal Structure of a Green Body Made by Dry-Pressing
Gelcasting of Dense Alumina Bodies Using Concentrated Agarose Gels
Sintering with Heterogeneities - Characterization and Modelling of the Microstructural Evolution
Slip Casting of Co-Milled Al2O3-SiC Powder Mixtures and their Characterization before and after Sintering against Slip Thickness
Sintering of Nanocrystalline Alpha Alumina Powders
Effect of TiO2 Additions on the Densification of MgO and MgO-CaO Mixtures
Influence of Green Compaction on the Sintering Behaviour of SiC-TiC-TiB2 Composites
Calcium in Alpha-Alumina: The Myth and some EM Observations
Direct Study on the Formation of Large Defects in Final Stage of Sintering in Alumina Ceramics
Alumina Ceramics Prepared by Enzyme-Free Direct Coagulation Casting
Pressing Behaviour of Spray Dried Alumina-Zirconia Granules
Binder Removal from Injection Molded Zirconia Ceramics
A Compaction Method to Make Uniformly Dense Ceramic Bodies of Complex Shape
Control of Texture in Al2O3 Composites by Slip Casting in a Strong Magnetic Field Followed by Heating
Densification and Microstructural Development during the Firing of Compounds in the Si3N4-SiO2-Y2O3 System
Direct Observation of Alumina Particles Orientation in High Magnetic Field
Effect of Temperature and Na 2CO 3 Additions on Sintering and Crystallisation of Anorthite
Effect of Dopants on the Reactivity of a-Alumina
Effect of Grinding on Characteristics of Alumina Ceramics
Electrophoretic Deposition of ZnO
Fabrication of Mixed-Oxide Sequential Deposited Silicon Nitride Powders
Fine Particle Dispersion and their Influence on Filtration Forming and Sintering Processing
Freeze Granulation for the Processing of Silicon Nitride Ceramics
High-Strain Rate Superplastic Zirconia Systems
Influence of Granules Properties on the Pressing
In-Situ Coagulation Moulding of Ceramic Suspensions
Textured ZnO-Based Varistors via Templated Grain Growth
Preparation of Cordierite Ceramics from Talc with Boron Oxide Addition
Sintering Properties of V2O5, Ta2 O5 and Nb2O5 Doped ThO2 Powder Under Ar-10% H2 Atmosphere
Correlation of Sintered Microstructure with Green Density in Thick-Film PZT
Development of Water Soluble Binder Systems for Low Pressure Injection Molding of Alumina
Structural and Microstructural Characterisation of Refractory Oxides Synthesised by Laser
Warpage Evolution of Screen Printed Multilayer Ceramics during Co-Firing
Template-Induced Deposition of Oxidic Films from Aqueous Solutions
Sol-Gel Electrochromic Materials and Devices
Synthesis of Tetragonal Zirconia Nanoparticles via an Aqueous Solution-Gel Method
Phase Formation of Perovskite Lead Magnesium Niobate Prepared by an Aqueous Solution-Gel Method
Characterization of the Pyrolysis Process and Structure of Silicon Oxycarbide Based Materials from Organically Modified Silicate Gels
Sintering of SiO2-Al2O3-TiO2 and SiO2-Al2O3-ZrO2 Obtained by the Sol-Gel Process
On the Chemistry of Pechini Process in Cerium Containing Systems
Preparation of ZrW2 O8 Xerogel and Aerogels by Sol-Gel Chemistry
Preparation of MgAl2O4 by Modified Sol-Gel Method
The Sol-Gel Process for Realisation of Optical Micro-Structures in Glass
Electrochromic Properties of Pure and Doped Nb2 O5 Thin Films
Hydrophobic (Water Repellant) Silica Films Having High Heat Resistance by Sol-Gel Dip Coating
Sol-Gel Made Zirconium Mixed Vanadium Oxide Films
Corrosion Protection of Steel by Hybrid Sol-Gel Coating
Comparison of the Properties of Various Sol-Gel Derived Anti-Reflective (AR) Coatings on SLS Glasses
Hybrid Nano-Composite Sol-Gel Coatings on Glass
Investigation of the Permeability of Pure Gases in Sol-Gel Derived Al2O3 Membrane
Preparation and Characterization of Sol-Gel Derived 4%La2 O3-Al2O3 Ceramic Membrane on Clay-Based Supports
Self Cleaning Photoactive TiO2 Coatings on SLS Glasses by Sol-Gel Dip Coating
Microstructural Characterization of Silicalite Crystals Obtained by Sol-Gel Hydrothermal Method
Sol-Gel Fabrication of Lithium Doped Zinc Oxide Thin Films
Strengthening of SLS Glasses by Hybrid Ormosil Coatings
Synthesis of Inorganic - Organic Polymers
Yttrium-Zirconium Citric Complexes as Starting Material for Preparation of YSZ Powders and Layers
Investigation of Inhomogeneous Zirconia Nanoparticles
Structural and Electrochromic Properties of Sol-Gel Made Tantalum Oxide and Tungsten Oxide Films
Simultaneous Polymerization of Mg and Zr Alkoxides
Microstructural and Optical Study of ITO Thin Films Prepared by Sol-Gel Method
Tribology of Advanced Ceramics and Hard Coatings
Design of Nanostructured Hard Coatings for Optimum Performance
Formation of PZT Thin Films on 6-Inch Wafers by Liquid Delivery Metalorganic Chemical Vapor Deposition
Tribological Characterization of Carbide-Derived Carbon Layers on Silicon Carbide for Dry Friction Applications
Wear Behavior of SiC, Cr3 C2 and WC Doped Alumina
The Fabrication of Nickel-Graphite Coatings on Mild Steel Using Plasma-Spray Techniques
Fretting Wear of ZrN and Zr(21% Hf)N Coatings
Polymeric and Ceramic-Like SiCN Coatings for Protection of (Light) Metals against Oxidation and Corrosion
Modeling Nucleation and Insulating Properties of Oxide Surfaces and Ultra-Thin Films
Characterization of Mo2N/Ag Nanocomposite Coatings Produced by Magnetron Sputtering
Characterization of Zirconium Diboride for Thermal Protection Systems
Stability of Carbides in Chlorine-Containing High-Temperature Environments
Deposition of CeO2 Buffer Layers and YBa2 Cu3O7-d Superconducting Layers Using an Aqueous Sol-Gel Method
Characterization of TiO2 Thin Films Prepared by Sol-Gel Processing
Microstructure and Oxidation Behavior of Plasma Sprayed Mo-Si-B Intermetallic Coatings
Formation of Oxide Films on the Surface of Electroconductive Si3N4-TiN and Si3N4-TiB2 Materials under Electrochemical Polarization in a 3% NaCl Solution
Application of Thermal Barrier Coating in a Diesel Engine
Catalytic Converter for Next Generation Turbine Engines
Characterization of Co-Based Metal Oxide Films on Glass
Corrosive Wear Behaviours of HVOF-Sprayed NiCr Coatings on Stainless Steel Substrates
Fly Ash Based Plasma Spray Coating
Friction and Wear Behaviour of Flame-Sprayed Cr2O3 Coatings as Bearing Materials
Improving the Surface Properties of Ductile Irons by Boronizing
Influence of Surface Physicochemistry and Morphology of TA6V Substrates on the Mechanical Resistance of Thin Layers of Alumina
Photoactive TiO2 Coatings on Metal Substrates by Cathodic Arc Deposition Technique
SiO2-ZrO2 Sol-Gel Nanostructured Thin Films with Optical Properties
Solid Particle Erosion of Thermal Sprayed Ceramic, Metallic and Carbide Coatings
Surface Modification of 8620 Steel by Pulse Plasma Technique After a Prior Carburisation Process
Kinetics of Boride Layers Formed on the Surface of AISI 4140 Steel
Preparation and Characterization of CuxO/Cu Thin Films by Reactive d.c. Magnetron Sputtering
The Sol-Gel-Like Preparation of Cu0.95Me0.05Ox Thin Films and the Study of their Microstructures and Optical Properties
Thermo-Reactive Diffusion Vanadium Nitride Coatings on AISI 1020 Steel
Tribological Performance of Ceramic Coatings Deposited on Polymer Substrates
Wear and Friction Properties of Multilayer Hard Coatings by HTCVD Method
Wear Behaviour of Plasma Sprayed WC-Ni Coatings
Processing and Characterization of Functionally Graded Ti/TixCy/DLC Thin Film Coatings
The Structural and Optical Properties of Tungsten Oxide Films and Doped Tungsten Oxide Films with Transition Metal Oxide
Microstructural Control of Y2O3 Coating on Quartz Glass for the Reduced Thermal Mismatch Stress
Ti(C,N) Hard Coatings Prepared by Pulsed High Energy Density Plasma
Characterization of Superhard Ternary (Ti,Al)N Coatings Prepared by Pulsed High Energy Density Plasma
YBCO Thick Film by Acetate and Nitrate Based Sol-Gel Precursor
Thick YBCO and Y0.5RE0.5BCO Coated Conductor by Sol-Gel Dip Coating Process
The ZrO2-MgO Coating by Sol-Gel Composite Methods
Sliding Wear of Plasma Sprayed Al2O3 and Cr2O3 Coatings
Influence of Boronizing on Mechanical Properties of EN-C35E Steel
Surface Modification of EN-C35E Steels by Thermo-Chemical Boronizing Process and its Properties
A Simple Approach to Synthesize and Bond Organosiloxane Films on Injection-Molded Polyolefins
Silicon Nitride Films Deposited by Low Pressure Chemical Vapor Deposition from SiH4-NH3-N2 System
Joining Mechanisms in Electrostatic Bonding
Reactive Joining of Alumina by Oxidation of Al Interlayers
Friction Welding of Functionally Graded Composites
Profiled Metal-Ceramic Micropackages for Power Microwave Diodes
Mechanism of Adhesion at Solid State Bonding Ceramic-Metal: Case of Silver-Alumina Couple
Ceramic Backing Materials Used in One-Side Welding Methods
Realisation of Joining between Copper and Aluminium Nitride
Contact Angle – Surface Energy Dependence in Solid Oxide / Liquid Metal Systems
The Characterization of Metal-Ceramic Interfaces in Porcelain Teeth
The Effect of Metal Coating on the Strength of Capacitor-Discharge Joining of Oxide Ceramics
Measured Anisotropy of Alumina Components Produced by Direct Ink-Jet Printing
Ink-Jet Printing of Wax-Based PZT Suspensions
Manufacturing of Complex Ceramic Parts by Selective Curing of Pastes
Reaction-Based Processing Methods
Sintering Inhibition in Nanostructured EB-PVD-TBCs by Applying Liquid-Phase-Infiltration
Spark Plasma Sintering: Possibilities and Limitations
Microwave Sintering of Ceramics: What Does it Offer?
Drying and Sintering of Ceramic Based Parts Using Microwave Heating
New Microwave Frequency 5.8 GHz for Industrial Applications
Microwave Assisted Burn-Out of Organic Compounds in Ceramic Systems
SiSiC-Ceramic Composites from Biocarbon Powder
Electrode Support Structures for Planar Solid Oxide Fuel Cells
Laser Processing as Surface Conditioning of Grinding Stones for Precision Machining Ceramics
Centrifugal Sintering of Copper
Synthesis of Homogeneous Materials by Splat Solidification in Short-Duration Microgravity
Microwave Assisted Processing of Ceramics
Stabilization of Undoped Tetragonal Zirconia in Alumina-Zirconia Composites Using Rapid Eutectic Solidification
Impact of the Intergranular Film Properties on Microstructure and Mechanical Behavior of Silicon Nitride
Slag Derived a-Sialon Ceramics and their Properties
Ultra-Refractory Ceramics: The Use of Sintering Aids to Obtain Microstructure Control and Properties Improvement
Analysis of Crack Propagation Behavior in Alumina with Different Grain Sizes under Static and Cyclic Fatigue
Creep of Nanocrystalline YTZP Ceramics and the Influence of the Glassy Phase
Transparent Fine-Grained Oxide Ceramics
The Effect of Oxide Addition on the Wear Performance of the Alumina Based Nozzles
A Wear-Resistant Zirconia Ceramic for Low Friction Application
High Temperature Deformation of Laminated Ceramic Composites Obtained from the Al2O3-ZrO2 System
Improvement of Toughness of Y-ZrO2: Role of Dopant Distribution
Microstructure of 8 Mole% Calcia Stabilized Zirconia-Alumina Composites Prepared by Polymeric Route
Interfacial Debonding and Debond Growth in Ceramic Composites
Lanthanum Titanate (La2Ti2O7) as an Interphase Material in Alumina (Al2O3) Based Composites
TiO2-Doped Ca-TZP/WC Particulate Composites
Reliability of Zirconia Based Composites
Alumina-Carbon Composites with High Hardness
Fabrication and Fracture Behavior of TiN-TiB2/Cu/TiN-TiB2 Sandwich Composites
Pressureless Sintering of Al2O3-TiCN Composites
Influence of Forming Conditions on Alumina Composite Characteristics Reinforced with Non-Oxide Particles
Rapid and Precise Manufacturing of Complex Shaped tough Silicon Nitride Ceramics
Corrosion Behaviour of Si3N4 Materials in Sulphuric Acid Contaminated with KF
Fluorine-Doped Reaction Bonded MgSiN2
Machinability Evaluation of Si3N4-hBN Composites for Micro Pattern Making Processes
Microstructure and Mechanical Properties of AlN-BN Based Machinable Ceramics
Corrosion Behaviour of Different Technical Ceramics in Acids, Basic Solutions and under Hydrothermal Conditions
Mechanical Properties of Electroconductive Ceramic Composites Produced by Hot Isostatic Pressing
Fabrication of Li-Doped Sialon Ceramics by Spark Plasma Sintering
New Synthesis Routes for AIN Polytype SiAlON Ceramics
Thermal Oxidation of Sintered Beta-Sialon (z=3) Ceramics in Atmospheres with Water Vapor
Processing, Microstructure and Mechanical and Tribological Properties of Rare Earth Containing Sialons
Gradient Structures in SiAlON´s for Improved Cutting Performance
Novel Optical Ceramics: a-Sialons
Influence of Additive Content on Phase Transformation of Hot-Pressed LPS-SiC
Processing and Properties of Novel Electroconductive Ceramic Composites
Nanoindentation, Microscratch, Friction and Wear Studies of Carbon-Fibre Reinforced SiC-Si Matrix Composite
Assessment of Impact Acoustic Resonance as a Non-Destructive Testing Method for Advanced Ceramic Parts
Synthesis and Sintering of Cordierite at Low Temperature from Kaolin and Magnesium Hydroxide
Comparison of Physical and Mechanical Properties of Cordierite Based Ceramics Produced from Natural Raw Materials and Synthetic Powders
Producing Cordierite from Local Magnesium Sources
Analysis of the Local Mechanical Behaviour of Ceramics and Composites through Nanoindentation/Scratching and Raman Microspectroscopy
Manufacturing, Mechanical Properties and Microstructural Characteristics of Ceramic Preforms
Corrosion of Electroconductive AlN-SiC-MoSi2 Composite in NaOH Solution
Crack Path Analysis and Mechanical Properties of a Multilayered Ceramic Composite
Creep of Aluminum Metal Matrix Composites Reinforced with Magnesium Spinel
Densification, Microstructure and Properties of Liquid-Phase Sintered Silicon Carbide
Development of Si-O-C Based Ceramic Matrix Composites Produced via Pyrolysis of a Polysiloxane
Effect of CaF2 Addition and Type of Alumina on Production of Aluminum Nitride
Investigations on Depth of Regions of Cut Surfaces Generated with Abrasive Waterjets
Effects of Fe-TiB2 Addition as Binder Phase on the Liquid Phase Sintering Behaviour of Tungsten Carbide Cermets
Electrical Conductivity of an Alumina Matrix and FeAl Particles Composites
Fracture Toughness of Alumina-Mullite Composites Produced by Infiltration Process
Grain Growth in Corundum Oxides-Doped Uranium Dioxide and Effects of Grain Growth to the Mechanical Properties of Uranium Dioxide such as Elasticity Determined by Ultrasonic Methods
Investigation of the Sintering Behavior of Ultrapure a-Alumina Containing Low Amounts of SiO2
High Thermal Shock Resistant Aluminium Titanate Type Ceramics
Influence of Alumina Precursors on Microstructure and Creep Behavior of Sol-Gel Derived Mullite Ceramics
Influence of Preparation Routes on the Surface Degradation of ATZ Ceramics
Influence of Process Parameters on the Phase Composition of SiAlON Ceramics from Polish Fly Ash
Investigation of Thermomechenical Behavior of a SiC-Graphite Crucible by FEA while Lifted by a Crane
J-Phase Structures in the Y-Si-Al-O-N System
Microstructural and Mechanical Investigation of Hot Pressed WC-Co/B4C Composites
Mechanical Behaviour and Wear Resistance of Ce-PSZ Alumina Matrix Composites
Mechanical Behaviour of Hard Ceramic Based Composites Obtained from SHS Powders
Mechanical Properties and Microstructure of Al2O3-Ti3SiC2 Ceramic Composites
Microstructural Characterization of Cordierite Ceramics Produced from Natural Raw Materials and Synthetic Powders
Microstructure Design of Liquid Phase Sintered Silicon Carbide in Function of the Powders Characteristics
Oxidation Behaviour of an AlN-SiC-MoSi2 Electroconductive Ceramic Composite
Oxidation Resistance of HfB2-SiC Coatings for Protection of Carbon Fiber Based Composites
Phase Relationships in the UO2- BaO-ZrO2-MoOx System
Production of Nickel Silicide by Powder Metallurgy
Reaction Model for the Boron Carbide/Aluminium System
Silicon Carbide Fiber Reinforced Recrystallized Silicon Carbide
Sintering Behavior and Mechanical and Thermal Shock Properties of Silicon Nitride - Boron Nitride Composites
Spinel Formation, Reaction Conditions and Densification Properties of Magnesia-Spinel Composites
Determination of Stability Areas of Yb- and Nd-a-SiAlON Phases Using the Rietveld Method
The Wear Behaviour of Dual Ceramic Particles (Al2O3/SiC) Reinforced Aluminium Matrix Composites
Thermal Conductivity of BeO-Doped SiC Ceramic at 5 to 1000 K
Non-Destructive Method for Impact Resisting Alumina Composites Characterisation
Validation of Probabilistic Fracture Models in Mullite Based Ceramics Using Experimental Data
Development of Laminar Type Functionally Graded SiAlON Ceramics
Effect of Different Nucleation Temperatures on the Microstructural Development of a-SiAlON Ceramics
Microstructural Evolution R-a-SiAlON Ceramics (R=Y, Y+Sm and Sm)
Formation of a-SiAlON Ceramics Containing Scandium
Mg+2 and Ce+3 Doped a-SiAlON Ceramics
Fretting Wear Behavior of Ti(CN)-Based Advanced Cermets
Commercial Silicon Nitride Powders Surface Groups Measured by Diffuse Reflectance Infrared Fourier Transform Spectroscopy
The Formation of Ni-Mo Alloy Phase in TiCN-Based Cermets
Processing and Properties of Novel SrTiO3 Based Layered Film Varistor
Time-Dependent Compositional and Morphology Change of YBa2Cu3O7-x Semisolid Phase
Nanoscale Microstructure Degradation of Y-BaCeO3 under Service Conditions
Polarization Graded Ferroelectric Materials
Effect of Cation Order on Microwave Dielectric Properties of Ba(Zn1/3Nb2/3)O3 Ceramics
Effect of Sintering Aids upon Dielectric Microwave Properties of ZnNb2O6, CoNb2O6, MgNb2O6 and CaNb2O6 Columbite Niobates
Effect of the Substitution of Bi2O3 on the Dielectric Properties of Barium Titanate Based Ceramics
Load Induced Changes in the Contact Resistance across an YSZ Interface
Ferroelectric and Piezoelectric Properties of Strontium Bismuth Tantalate Ceramics
Microanalysis of Pb(Zr, Ti, W, Li)O3 Piezoeceramic
Synthesis and Characterisation of Oxide Ions Conductors with the Apatite Structure for Intermediate Temperature SOFC
Development of Advanced Low Temperature Co-Fired Ceramics (LTCC)
90° Domain Configuration and Lateral Domain Wall Motion in BaTiO3 Evaluated by Secondary Electron Microscopy
Synthesis and Characterization of New Phases with Composition Sr1-xNax(Ti1-xMgx)O3-3xF3x
Production and Characterisation of PMN-PT Piezoceramics Modified by Yttrium and Bismuth
Electrical and Microstructural Properties of Superconducting MgB2/Mg Composites
Densification Behaviour of MgB2 Superconductor by Hot-Pressing
Synthesis of Nanosized Tin Oxide (SnO2) Particles via Homogeneous Precipitation
Yb-123 Superconducting Film Coating on Gd2O3 Buffered Nickel Substrate by Sol-Gel Method
Chemical-Solution Deposition of Oriented (Ba0.33Sr0.67)TiO3 Thin Films
Pb(Zr0.52Ti0.48)O3 Films on Stainless Steel by Chemical Solution Deposition
Low Temperature Formation of Anatase Titanium Dioxide
Self-Induced Crystallinity in RF Magnetron Sputtered ZnO Thin Films
Effect of Different Dopants on the Microwave Properties of M-Doped Barium Hexaferrites
Low Temperature Firing of Ni-Cu-Zn Ferrites
Ab Initio Study of Magnetic Properties of SiC-Based Diluted Magnetic Semiconductors
Electrical Properties of Na0.5Bi2.5Ta2O9-Sr1-xBi2+yTa2O9 Solid Solution Ceramics
Antimony Doped Bi2O3 Thin Films
Ba1-xSrxTiO3 Films Prepared by Chemical Solution Deposition
Calculations of R(T) and I(V) Characteristics of the n-Doped BaTiO3 Ceramics with PTCR Properties
Ceria-Based Electrolytes for Intermediate Temperature SOFCs - Electric and Dielectric Properties
Characterization of the Substituted Lanthanum Manganites
Compositional Modifications in Humidity Sensing MgAl2O4 Ceramics
Dopant Effects on Sintering and Microstructure Development in Zinc Oxide-Based Electroceramics
Effect of Fe2O3 Additions on Dielectric Properties of BaTiO3-NaNbO3 Ceramics
Effects of Sintering Parameters on Initial Magnetic Permeability of Ni-Zn Ferrite
Effects of Processing Parameters on the Dielectric Properties of Ca(Ti0.95Li0.05)O2.85F0.15 Ceramics
Texture Development in KSr2Nb5O15 Ceramics Fabricated by Reactive Templated Grain Growth
Epitaxial Growth of Nb Doped SrTiO3 Buffer Layers on LaAlO3 Substrates by Metalorganic Deposition for YBCO Films
Gelcasting of Pb(Zr,Ti)O3 Based Piezoelectric Ceramics
Investigation on the Structure of PLZT Ceramics Due to Light Scattering
Microstructure and Microwave Dielectric Properties of Calcium Magnesium Niobate
Tailoring the Q of Cymbal Transducer
Phase Formation Study of La-Modified Lead Magnesium Niobate
Synthesis, Characterization and Application of High Temperature MgO-ZrO2 Insulation Coatings on AgMg Sheathed Bi-2212 Tapes for Magnet Technologies
Preparation of Textured Bi4Ti3O12 Ceramics by Templated Grain Growth
Processing and Properties of Piezoelectrics Based on BNT (Bi,Na)TiO3
Synthesis and Characterizations of LaM2M'3S6-y (M: Mg, Ca, Sr, Ba; M':Cu, Fe), La2SrS4 and La2CaS4
The Center for Dielectric Studies (CDS): A National Science Foundation Industry/University Cooperative Research Center
The Effect of B2O3 Addition on the Sintering of Sb2O3 Doped BaTiO3
The Grain Growth Kinetic in ZnO –Bi2O3-Sb2O3-MnO-CoO-Cr2O3-Al2O3 Varistor System Processing with Pre-Coprecipitation Master Batching
Zirconia Based Sensor Tubes Fabricated by Plasma Technology
Microstructural Effects on Electrical Behaviour of ZnO-Based Varistors
Sintering of Zinc Metatitanate with Zinc Borate Addition
Production and Properties of (1-x)Pb(Sc1/2Nb1/2)O3 – xPb(Yb1/2Nb1/2)O3 Solid Solutions
Dielectric Properties of Some Cationic Forms of Laponite Clay
The Investigation of Dielectric Properties of Pyrophyllite
Improvement of Piezoelectric Properties through Post Hipping
Development of Glazes that Generate Heat
Raman Spectra of Zirconia Substituted Yttria Solid Solutions
The Role of Hydrogen - Metasomatism in the Hydrothermal Kaolin Occurrences, Gönen, Western Turkey
Investigation into the Relation of the Degree of Structural Order in Kaolinites and the Formation of Silicates in Multicomponent Systems
Particle Size and Shape Characterization of Kaolins-Comparison of Settling Methods and Laser Diffraction
Incorporation of Sludges in Light Expanded Clay Aggregates
Quantitative Determination of Mineral Content of Geological Samples of Clays by Chemical Analyses
Theory and Applications of Microwave Energy in Communition
Scanning Electron Micrographs of certain Turkish Kaolin Deposits with Special Reference to Genesis
Study about a Fused MgO Ingot Produced in a Laboratory Type DC Electric Arc Furnace
Influence of Cationic Polymers on the Rheological Behavior of Bentonite Clay Suspensions
Pilot Scale Tests for Evaluation of Feldspar Tailings for Ceramic Industry
Beneficiation of Feldspar from Yozgat Region Granites
Investigation of Some Physical and Chemical Properties With Respect to Processing of Kaolin Samples from Sivas Deposits in Turkey
Use of Pumice Stone as a Ceramic Raw Material
Zeolitic Tuffs as Raw Materials for Lightweight Aggregates
Selective Separation of Sodium and Potassium Feldspar Minerals from Orebodies
Sedimentation of Clays prior to Ceramic Production
The Usage of Derbent Dolomite in Ceramic Production
Influence of Non-Ionic and Cationic Polymer on the Rheological and Colloidal Properties of Montmorillonite Dispersions
Modern Decoration Technologies for Tiles: New Products, New Additives, New Problems
Technical Evolution of the Spanish Ceramic Sector
The Spanish Glass and Ceramic Industries
Grinding Work Simulation in Industrial Porcelain Tile Polishing
Optimisation the Body-Degassing and the Quality of the Glaze Surface under Single Fast Firing Conditions
Production of Anorthite from Kaolinite and CaCO3 via Colemanite
Microstructural and Mechanical Characterisation of Polyamide Fibre-Reinforced Latex-Filled Plaster Composite Materials
Equilibrium Moisture Content of Clay Bricks
High Strength Diopside Containing Porcelain Tiles
Influence of Strengthening Components on Industrial Mixture of Porcelain Stoneware Tiles
Processing of Ultra White Porcelainized Stoneware Based on Anorthite
Influence of Operating Variables on Spray-Dried Granule and Resulting Tile Characteristics
A New Way for the Development of Fine Stone Ware Bodies
Frost Resistance of Ceramic Floor Tiles: A Prenormative Study
Stain Resistance of Porcelain Stoneware Tiles: The Influence of Microstructure
Surface Abrasion of Glazed Ceramic Tiles: A New Investigation Technique
Surface Deterioration and Scratch Resistance of Polished Porcelain Stoneware Tiles
Firing Behavior of Alkaline Earth Flux in Ceramic Bodies: The Effect of Magnesite on Firing Mineralogy and Physical Properties
Influence of Preparation Parameters and Storage Conditions on Rheological Behaviour of Faience Casting Slips Used in Tableware Industry
The Effect of Spodumene and Zirconium Based Materials on the Rheology of Slips for Porcelain Stoneware Tile
Kinetics of Mullitization of Commercial Andalusite Grains
Making Research and Development Data More Meaningful in Ceramic Production
Synthesis of a New Class of Red Pigments Based on Perovskite - Type Lattice AxB(2-x-y)CryO3 with 0.90
