Buch, Englisch, 1006 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1800 g
The Proceedings “High Technology: Research and Applications 2015” covers a wide range of scientific areas and modern trends in science and technology. This book of Proceedings presents selected papers on chemistry, discharge and plasma technologies, nanomaterials, mechanical engineering, optics, IT, etc. The presented scientific works were carried out by academics as well as by industrials. The aim of the Proceedings is to present and discuss the actual state of the studies in the relevant fields and to show the prospects of its development.
Buch, Englisch, 1006 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 1800 g
ISBN: 978-3-03835-708-7
Verlag: Trans Tech Publications
Autoren/Hrsg.
Fachgebiete
- Mathematik | Informatik EDV | Informatik EDV & Informatik Allgemein
- Technische Wissenschaften Technik Allgemein Technische Optik, Lasertechnologie
- Technische Wissenschaften Sonstige Technologien | Angewandte Technik Angewandte Optik
- Technische Wissenschaften Technik Allgemein Nanotechnologie
- Technische Wissenschaften Technik Allgemein Technik: Allgemeines
- Wirtschaftswissenschaften Wirtschaftssektoren & Branchen Fertigungsindustrie Spitzentechnologiesektor
- Technische Wissenschaften Verfahrenstechnik | Chemieingenieurwesen | Biotechnologie Verfahrenstechnik, Chemieingenieurwesen
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde
- Technische Wissenschaften Maschinenbau | Werkstoffkunde Maschinenbau
Weitere Infos & Material
Preface
Chapter 1: Numerical Simulation of Physical and Chemical Processes
Comparative Analysis of Calculation Models of Pulse Tube Thermoacoustic Refrigerator
The Study of Inhibition of Atom-Atom Collisions Cascades by Ni-Al (100) Interphase Boundary
Boundary Value and Optimal Control Problems for Nonlinear Convection-Diffusion-Reaction Equation
Multiscale Simulation of Cold Axisymmetric Deformation Processes
Control Problem for Unsteady Magnetohydrodynamic Flow of Viscous Heat Conducting Fluid
Mathematical Modeling of the Technological Process of Residual Stresses Relief in Metals at Low-Temperature Exposure
Steady Flow of Incompressible Elastic-Plastic Medium in a Spherical Matrix at Variable Loads
Calculation of the Residual Stress Field of the Thin Circular Plate under Unsteady Thermal Action
Numerical Analysis of Inverse Extremum Problems for the Nonlinear Nonstationary Diffusion-Reaction Equation
Pressure Losses of Power-Law Fluid Flow through an Axisymmetric Sudden Contraction
The Mathematical Model of Reflection and Refraction of the Longitudinal Shock Wave at the Interface of Two Nonlinear Elastic Media
Numerical Analysis of 2D Cloaking Problems Using Homogeneus Materials
Analysis on the Applicability of Diffusion Approximation for the Radiative Transfer Equation with Compton Scattering
Dynamics of Discrete Breathers in the Pt3Al Crystal
Simulation of the Acoustic Field of Antenna Arrays
2D Electromagnetic Wave Scattering Problem for Cylindrical Cloak Incorporating PEMC-Layer
Numerical Approach to Solving Problems of Two-Phase Multicomponent Flow in Porous Medium Based on Finite Volume Method
Burning Rate Calculation for a Frozen Nanosized Aluminum Suspension
Boundary Design of Reflection Properties of a Steady-State Complex Heat Transfer Model
Numerical Study of Combustion Regimes and Heat Radiation of Cylindrical Porous Burner
Optimal Control Problem of Complex Heat Transfer for SP1 Approximation
Numerical Simulation of Melting of Phase Change Material in a Square Cavity with a Heat Source
The Features of Parallel Program for 3-D Modeling of Dynamic Processes in Porous Objects with Heat-Evolution
Two Approaches for Simulating the Burning Surface in Gas Dynamics
Phenomenological Modeling of Rheological Properties of Polyetheretherketones Reinforced with High Modulus Carbon in the Machining Process by a Reversible Analysis Method
Decay of Low-Barrier Metastable State: Middle Friction
Corrections to Kramers Formula Describing the Decay Rate of a Metastable State
Bending Process Simulation of a Flat Workpiece with Various Cross-Sectional Mechanical Properties with PAM-STAMP 2G
Identification Method of Blast-Furnace Process Parameters
Optimality Conditions for Pareto-Optimal Solutions
Initial Data Forming for Process Simulation in System “Intruder – Physical Protection System”
Numerical Modeling of Cyclone Machine for Cleaning Gas Generator Gases
Simulation of Conditions of Solid Fossil Fuels Formation for Underground Conversion Investigation
Numerical Study of Grain Evolution and Dislocation Density during Asymmetric Rolling of Aluminum Alloy 7075
The End-to-End Computer Simulation of Casting and Subsequent Metal Forming
Boundary Element Formulation for Numerical Surface Wave Modelling in Poroviscoelastisity
Use of Lagrangian-Eulerian Computing Method for Systems with Phase Change at the Solution of Stefan Boundary Value Problem
Finite Element Modeling of Influence of Roll Form of Vertical Scale Breaker on Decreased Formation of Surface Defects during Roughing Hot Rolling
Mathematical Simulation of Cramped Bending of Sheet Parts Using Finite Element Analysis
Accounting Viscous Dissipation at Round Tubes Filling
Features of Difference Scheme for the Diffusion-Kinetic Problem of Ion Implantation with Intermetallic Phases Formation
Thermal Activated Elements Redistribution between Two-Component Coating and Substrate
Modifications of the Mathematical Crisher Model for Effective Moduli of Two-Component Elastic Isotropic Composite
Solving Unsteady Boundary Value Problems Using Discrete-Analytic Method for Non-Iterative Simulation of Temperature Processes in Time
Correct Numerical Methods of Analysis of Structural Strength and Stability of High-Rise Panel Buildings - Part 1: Theoretical Foundations of Modelling
Correct Numerical Methods of Analysis of Structural Strength and Stability of High-Rise Panel Buildings - Part 2: Results of Modelling
Spectral Analysis of Narrow Band Periodic Signals
On Modelling of Creep and Plasticity in a Problem of Viscosimetric Flow of a Material
Influence of a Porous Insert on the Fluid Flow inside the Gasifier Shaft
Mathematical Simulation of Hydraulic Power Pulse Machine at Matlab
The Numerical Study of a Dropwise Condensation Mode when Cooling Heat Transfer Surfaces
Non-Uniform Temperature Distribution in Multilayer Thermal Protective Coating with Curved Interfaces
Numerical Simulation of Gas Evolution from Oil-in-Water Flow for Multistage Separation
Classification of the Signatures for Doppler Radar from the Standpoint of Active Perception Theory
A Three-Dimensional Boundary Element Approach for Transient Anisotropic Viscoelastic Problems
Convection Heat Transfer on a Vertical Surface in Porous Media
One-Dimensional Wave Propagation in a Three Phase Poroelastic Column
Hydrodynamics and Heat Transfer in the Coolant Flows in the Elements of the Technical Designs of Industrial Systems
Study of Bone Tissue Stress and Strain State Aimed at Development of Intelligent Biomaterials for Osteoimplantation
Chapter 2: Mechanical Engineering Technology
Perspectives of Application of 3D Shape Memory Composite Materials for Peristaltic Transportation of Slurries
Effect of Copper Additives on Mechanical and Tribotechnical Properties of Sintered Composites Al-Sn
On Zero-Order Optimization in Problem of the Pressure Computing in Finite Elastic-Creep Deformations
Deforming of Elastic-Plastic Medium with Self-Similar Restriction
Experimental Studies of Thermoelectric Characteristics of Plastically Deformed Steels ST3, 08KP and 12H18N10T
Effect of Surface Emissivity on Conjugate Turbulent Natural Convection in an Air-Filled Cavity with a Heat Source
Hydraulic Power of Vibration Test Stand with Vibration Generator Based on Switching Device
Propellant Grain with Maximum Combustion Efficiency of Metal
Effect of Ultrasonic Impact Treatment on Microstructure and Mechanical Properties of Commercial Purity Titanium
Technique of Decomposition of Form Deviation for Freeform Surfaces
Strength and Stiffness Calculation of Small Diameter Gun Drills
Efficiency of the Small-Sized System with Thermo-Electrical Conversion of the Heat from Gas Combustion
Reliability Evaluation of Integrated Modular Avionics Computational Structures for Different Hardware Configurations
Universal Reference Test Blocks for Liquid Penetrant Testing
Forming Effective Cycle of Round Grinding with Radial Feed
Model of Hydraulic Rotary Control Valve for Control of Pneumohydraulic Impact Unit
The Statistical Analysis of Granulometric Composition and Microgeometrical Indicators of Abrasive Grains of Grinding Wheels for Rough Machining
Technology Development of Large-Size Bodies Manufacturing from Thick Plate Materials Based on Combined Methods of Deformation
Improving the Quality of the Coating at Hot-Dip Galvanizing of Machine Steels in the Zinc Melt with Microadditives of Nickel
The Research of Influence of Cold Rolling Conditions on Mechanical Properties Anisotropy of Sheets from Aluminum Alloy 8011A
Effect of Conjugated Heat Transfer Conditions on the Crystallization of the Composite Coating
Investigation of Lamb Wave Based Ultrasonic Technique for AA2024 Evaluation at Static Tensile Loading
Lamb Wave Based Ultrasonic Technique for AA2024 Fatigue Evaluation
Particularly Selective Sintering of Metal Powders by Pulsed Laser Radiation
Research into Contact Interaction of an Elastic Tool during Rotational Pattern Cutting of Sheet Parts
Metal Surface Treatment with Particle Fluxes Taking into Account the Internal Boundary
Improving Reliability of Hot Plate Mill Electromechanical System
Efficiency of Microcombustion System with Thermoelectric Generator Combined with Countercurrent Heat Exchanger
Strength of Cutting Tool in Titanium Alloy Machining
Physical Justification of an Increase in the Efficacy of Radiofrequency Systems for Myocardial Ablation
Estimation of Combustion Engine Rotation Speed Based on Vibration Signal Analysis
Friction Influence on the Accuracy of the Rotors Automatic Balance
Methodological Aspects of Evaluation of Foundry Technologies Effectiveness
The Influence of the Pouring Temperature on the Structure and Properties of Copper Metal Alloys
Lead Distribution in Centrifugal-Cast Billets Made of Quinary Tin-Base Bronze Depending on the Mould Spin Rate
Casting Quality Enhancement of Bushings Made of Foundry Aluminium Bronzes
Sampling Control Planning on the Base of Operating Characteristics and with a Grapho-Analytical Method
Thermodynamic Analysis of the Effect of ZhS6U Alloy Doping Elements on the Process of Circular Chrome-Aluminizing
Thermodynamic Analysis of the Formation of Aluminum and Chrome Halides for Circular Chrome-Aluminizing
SLS Setup and its Working Procedure
Evaluation of the Effect of LED-Lamp Spectral Content on the Development of Greenhouse Tomato
The Possibility of Manufacturing Long-Length Metal Products with Ultra-Fine Grain Structure by Combination of Strain Effects
Chapter 3: Advanced Materials and Alloys, Nanomaterials and Nanotechnology
Design of Composite Wire for Arc Welding and Ni3Al-Based Alloys Surfacing
Influence of Granulation of Powder Charge of Titanium-Boron on Regularities of Self-Propogating High-Temperature Synthesis of Porous Materials
Wear-Resistant Coatings Reinforced with TiB2 Micro-Particles and TiCN Nano-Sized Particles
Two-Step Synthesis of Tungsten and Molybdenum Disulfides
Morphology of Aluminum Nanopowder Combustion Products in a Magnetic Field in Air
The Influence of Aluminium Nanopowder Density on the Structure and Properties of its Combustion Products in Air
Influence of Severe Plastic Deformation on Physicomechanical Properties of Ti-40 mas % Nb Alloy
Developing Nanomaterials with Given Properties Based on Aluminum Oxyhydroxide
Interaction Potential of Open Carbon Nanotube with Natural Gas Molecular Components
Use of Zinc Oxide Nanopowder as an Additive in a Tribotechnical Composite Based on Refractory Metal Disulfide
Strains Determination at the Joints of Cylindrical Glass-Metal Composite Shell Layers
Influence of Filling Agent Quantity on Characteristics of Polymeric Composites
Microwave Composite Absorbers Based on Barium Hexaferrite/Carbon Nanotubes for 0.01-18 GHz Applications
Obtaining Nanopowder Ligature Briquettes Ni-(SiC+Si3N4) for Modification of Aluminum Alloys
Electrochemical Activity of Methionine at Graphite Electrode Modified with Gold Nanoparticles
Electrical Properties of Carbon Nanotube-Reinforced Polymer Composites
Investigation of Deformation Mechanisms for High-Purity Aluminium at Various Fatigue Stages
Self-Propagating High-Temperature Synthesis of Composite Nanopowder AlN-BN from Systems "Sodium Azide – Halides of Aluminum and Boron"
The Feasibility of Usage TiN and CrN Barrier Sublayers for Improving the Adhesion of Polycrystalline Diamond Films on WC-Co Hard Alloys
The Effect of Cu–Mo–S Coatings on Wear Resistance of Copper Friction Pair
Effect of Aluminum Content on the Performance of Coatings Based on Al-Si-N
Property Investigation of Pt-Rh Alloy Nanopowders Obtained by Conductor Electric Explosion Method
The Influence of Hydrogen on the Process of Plastic Flow Self-Organization in Ti
Microstructure and Properties of the Composite on the Basis of Copper and Diamond
Chapter 4: Optical Technology
Estimation of Orientation and Optical Properties of Plane Crystals by Polarization Characteristics of Lidar Returns
Optical Model of Medium for the Numerical Imitation of Wave Surface Forming High-Intensity Reflected Radiant Energy
Luminescence of LiF Crystals Doped with Metal Oxide Impurities
Stimulated Emission in CdHgTe Structures with Quantum Wells under Optical Pumping
Chapter 5: Discharge and Plasma-Beam Technology
Oligomerization of Carbon Monoxide in Plasma of the Dielectric Barrier Discharge
The Energy Stored in the Aluminum Nanopowder Irradiated by Electron Beam
The Deposition of Silicon-Carbon Coatings in Plasma Based Nonself-Sustained Arc Discharge with Heated Cathode
Removal of Iron Colloid Substances from Aqueous Solutions Using Pulsed Corona Discharge
Dissipation of Pulsed Electron Beam in Hydrogen and Oxygen in High Pressure
Study of the Mechanism of Interaction of Microwave Plasma Discharge with Solutions of Organic Substances
Study of Destruction of Organic Substances in Water Solutions by Pulsed Electrical Discharges in the Iron Granules Layer
Multicapillary Carbon-Epoxy Tubes as a Cathode Material for a Pulsed Electron Accelerator
Treeing Morphology in Oil Shale
Influence of the Plasma of Nanosecond Diffuse Discharge in Air at Atmospheric Pressure on the Electrophysical Properties of Epitaxial CdHgTe Films
The Study of Properties Characterizing Aluminum Hydroxides Produced by Electric Discharge
Model of Powder Material Plastic Transformation during Plasma Coating Application
Coating Composition Evolution during the Deposition of Al and N from Plasma on a Cylindrical Substrate
Electron Beam Coatings with SHS Composite Powders “TiC - Cast Iron Binder" Synthesized in Air
The Analysis of the Mechanisms for Plasticization of Boron Carbide Ceramics Irradiated by an Intense Electron Beam
Mobile Electric-Discharge Blasting Unit for Splitting off and Destruction of Rocks and Concrete
Production of Powders by the Method of Electrospark Dispersion
Regularities of Structure and Phase Composition Formation of Surface Layer of Silumin Subjected to Electron-Beam Treatment
Structure and Properties of Electron-Beam Coatings, Overlaid of SHS Composite Powders "TiC – Ti", Synthesized in Air
Properties of WC-6Co Hard Alloy Powders Obtained by the Method of Spark Plasma Dispersion
Chapter 6: Chemical Engineering and Technology
The Application of Electrochemical Technology in the Production of Ethylenediamine
Influence of Ultra-Violet Radiation on Sublimation Energy of Silver Chloride (AgCl)
Comparative Characteristics of Voltammetric Methods Determination of Platinum in Mineral Raw Materials
Extraction of Oil Heteroatomic Compounds Using Metal Powders
Investigation of the Influence of Matrix Components of Gold Mineral Resources on the Electrochemical Determination of Pt and Re
Synthesis and Characterization of Transition Metal Complexes of 1,2-Bis(3,5-Dimethylpyrazol-1-yl)-1,2-Ethanediol
Calculation of Equilibrium Concentrations of Calcium Ions for Calcium Bicarbonate Removal from Water Solution with Ammonium Hydroxide
Dehydrogenation of Methylbutenes with Intermediate Oxidation of Hydrogen
Fe Reduction by Carbon during Self-Propagating High-Temperature Synthesis of Fe-TiC Composite
Oxidative Conversion of Methane into Syngas Using Porous Catalysts Prepared by Combustion Synthesis
Deposition of a Thin-Film CGO Electrolyte for Solid Oxide Fuel Cells
Analysis of Oil Shale Applicability for Gasification Using TGA Results
One-Pot Amide Synthesis via Thermal Decomposition N-Acylureas under Microwave Irradiation
Chemical Reaction Front Propagation between Inert Materials with Different Properties Taking into Account the Reagent Melting
Influence of Mineral Salts on the Production of Antibiotics Phenazine Series from Pseudomonas Aeruginosa
Synthesis and Study of Norfloxacin Labeled with Technecium-99m as a Potential Imaging Agent of Bacterial Inflammations
Chapter 7: Information Technology, Data and Signal Processing
Reliability Model of Fault-Tolerant Dual-Disk Redundant Array
Computer-Aided Modelling of a Latch Die Cutting in Deform - 2D Software System
Simulation of Multidimensional Non-Linear Processes Based on the Second Order Fuzzy Controller
Information Technologies in Industrial Enterprises Production Assets Management
Adaptive Algorithm of Sensor Polling for Device Used for the Dam Condition's Diagnostics
Development of Intelligent Algorithm for Positioning a Vehicle on a Route
Simulation of Telephone System with Reserved Communicational Channels and Automatic Correction of Transmission’s Delay of the Audio Stream
Architecture of Enterprise Information Systems Based on the Semantic Web Technologies
Method of Evaluation of Social Network User Sentiments Based on Fuzzy Logic
Effective Method for Constructing Pseudo-Random Vectors Uniformly Distributed in Cone
Optimal Methods of Segmentation of Tomographic Volume Searching System: A Preliminary Review
Integration of Heterogeneous Company Information Resources Using Semantic Technologies
Distributed Information System for Processing and Storage of Meteorological Data
Content-Based Image Retrieval Using Color, Texture and Shape Features
Source Code Analysis: Current and Future Trends & Challenges
Software Traceability – A Key to Improve Software Evolution
Resource Allocation Algorithm Modeling in Queuing System Based on Quantization
Flexible Process Model Design
Fast Search for Intra Prediction Mode in H.265/HEVC Video Compression
Algorithm of the Alternatives Generation in the Design of the Geological and Engineering Operations
Development of the Decision-Making Algorithm on the Geological and Engineering Operations Based on the Infrastructure of the Digital Oil Field
Simulation of Discrete-Continuous Process via E-Network
Real-Time Recovery of Functions and their Derivatives by Variation Splines
Uniform Model of Representation Heterogeneous Data Hydrometeorological Observations
Formalized Approach in Relational Database Design
Development of a Queuing System with Dynamic Priorities
Discrete-Event Approach to Simulation of Queueing Networks
Using Parallel Computing in Queueing Network Simulation
Development of Graphical Interface for Determination of Optimal Cutting Parameters in Turning Operations
Allocation of Clusters of Objects on Topological Graphs of High Cardinality
System for Visualizing and Analyzing Multivariate Data of Medico-Social Research
Local High-Accuracy Plate Analysis Using Wavelet-Based Multilevel Discrete-Continual Finite Element Method
Generation of the Dynamic System Control Signal According to Characteristic of the Transient Process
