E-Book, Englisch, 592 Seiten
Schweitzer, P.E. Corrosion of Polymers and Elastomers
Erscheinungsjahr 2006
ISBN: 978-0-8493-8246-8
Verlag: Taylor & Francis
Format: PDF
Kopierschutz: Adobe DRM (»Systemvoraussetzungen)
E-Book, Englisch, 592 Seiten
Reihe: Corrosion Engineering Handbook, Second Edition
ISBN: 978-0-8493-8246-8
Verlag: Taylor & Francis
Format: PDF
Kopierschutz: Adobe DRM (»Systemvoraussetzungen)
Corrosion of Polymers and Elastomers provides a detailed examination of the corrosive effects of thermoplastic polymers, thermoset polymers, and elastomeric materials. The book is perfectly suited for specialists interested in the corrosion resistance and mechanisms of these materials.
Following a general introduction to the composition, properties, and applications of polymers, the book focuses on the effects of chemical corrosion caused by changes in temperature, moisture, and other corrodents. Organized by material type, the chapters cover each material's ability to withstand sun, weather, and ozone as well as its chemical resistance and typical applications. The book also includes compatibility tables for each of the materials and compares the corrosion resistance of selected elastomers.
Zielgruppe
Students, professionals, and researchers in corrosion science and engineering; materials science; civil, structural, and mechanical engineering; corrosion chemistry; analytical and physical chemistry; surface and interfacial chemistry; and polymer chemistry.
Autoren/Hrsg.
Weitere Infos & Material
Introduction to Polymers
Additives
Permeation
Absorption
Painting of Polymers
Corrosion of Polymers
Thermoplastic Polymers
Joining of Thermoplastics
Acrylonitrile-Butadiene-Styrene (ABS)
Acrylics
Chlotrifluoroethylene (CTFE)
Ethylenechlorotrifluoroethylene (ECTFE)
Ethylene Tetrafluoroethylene (ETFE)
Fluorinated Ethylene-Propylene (FEP)
Polyamides (PA)
Polyamide-Imide (PAI)
Polybutylene (PB)
Polycarbonate (PC)
Polyetheretherketone (PEEK)
Polyether-Imide (PEI)
Polyether Sulfone (PES)
Perfluoralkoxy (PFA)
Polytetrafluoroethylene (PTFE)
Polyvinylidene Fluoride (PVDF)
Polyethylene (PE)
Polyethylene Terephthalate (PET)
Polyimide (PI)
Polyphenylene Oxide (PPO)
Polyphenylene Sulfide (PPS)
Polypropylene (PP)
Styrene-Acrylonitrile (SAN)
Polyvinylidene Chloride (PVDC)
Polysulfone (PSF)
Polyvinyl Chloride (PVC)
Chlorinated Polyvinyl Chloride (CPVC)
Chlorinated Polyether (CPE)
Polyacrylonitrile (PAN)
Polyurethane (PUR)
Polybutylene Terephthalate (PBT)
Acetals
Thermoset Polymers
Corrosion of Thermosets
Joining of Thermosets
Ultraviolet Light Stability
Reinforcing Materials
Polyesters
3.6 Epoxy Polyesters
Vinyl Esters
Furans
Phenolics
Phenol-Formaldehyde
Silicones
Siloxirane
Polyurethanes
Melamines
Alkyds
Ureas (Aminos)
Allyls
Polybutadienes
Polyimides
Cyanate Esters
Comparative Corrosion Resistance of Thermoplastic and Thermoset Polymers
Elastomers
Introduction
Natural Rubber
Isoprene Rubber (IR)
Neoprene (CR)
Styrene-Butadiene Rubber (SBR, Buna-S, GR-S)
Nitrile Rubber (NBR, Buna-N)
Butyl Rubber (IIR) and Chlorobutyl Rubber (CIIR)
Chlorosulfonated Polyethylene Rubber (Hypalon)
Polybutadiene Rubber (BR)
Ethylene-Acrylic (EA) Rubber
Acrylate-Butadiene Rubber (ABR) and Acrylic Ester-Acrylic Halide (ACM) Rubbers
Ethylene-Propylene Rubbers (EPDM and EPT)
Styrene-Butadiene-Styrene (SBS) Rubber
Styrene-Ethylene-Butylene-Styrene (SEBS) Rubber
Polysulfide Rubbers (ST and FA)
Urethane Rubbers (AU)
Polyamides
Polyester (PE) Elastomer
Thermoplastic Elastomers (TPE) Olefinic Type (TEO)
Silicone (SI) and Fluorosilicone (FSI) Rubbers
Vinylidene Fluoride (HFP, PVDF)
Fluoroelastomers (FKM)
Ethylene-Tetrafluoroethylene (ETFE) Elastomer
Ethylene-Chlorotrifluoroethylene (ECTFE) Elastomer
Perfluoroelastomers (FPM)
Epichlorohydrin Rubber
Ethylene-Vinylacetate Copolymer (EVM)
Chlorinated Polyethylene (CM)
Comparative Corrosion Resistance of Selected Elastomers
Index
*Most chapters contain Reference sections
