E-Book, Englisch, 814 Seiten
Van der Biest / Gasik / Vleugels Functionally Graded Materials VIII
Erscheinungsjahr 2005
ISBN: 978-3-03813-008-6
Verlag: Trans Tech Publications
Format: PDF
Kopierschutz: 0 - No protection
E-Book, Englisch, 814 Seiten
ISBN: 978-3-03813-008-6
Verlag: Trans Tech Publications
Format: PDF
Kopierschutz: 0 - No protection
Volume is indexed by Thomson Reuters CPCI-S (WoS).Multifunctional materials are composite systems that exhibit useful responses to electrical, optical, magnetic and/or mechanical stimuli. They allow the compact and economic integration of two or more functions; which can be mechanical, biological, acoustic, thermal, electrical, magnetic, optical or sensory in nature. Functionally graded materials (FGM) are also multi-functional materials, which exhibit spatial variations in composition and/or microstructure; created with the specific purpose of controlling variations in thermal, structural or functional properties. In spite of large differences in the type and size scale of the materials considered, many common features exist, thus furnishing a rationale for grouping these materials together in one book.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface
Testing and Characterization of Ceramic Thermal Barrier Coatings
Optimisation of FGM TBC and Their Thermal Cycling Stability
Design and Fabrication of ZrO2/Stainless Steel Thermal Barrier Coating FGM
Advanced High Temperature Turbine Seals Materials and Designs
Electrically Conductive and Wear Resistant Si3N4-Based Composites with TiC0.5N0.5 Particles for Electrical Discharge Machining
Wear Mechanisms in Functionally Graded Aluminium Matrix Composites: Effect of the Presence of an Aqueous Solution
Functional and Structural Characteristics of Metallic Foams Produced by the SlipReactionFoamSintering (SRFS)-Process
The Effect of Grinding Residual Stresses on Contact Loading Strength Degradation in Y-TZP with Different Microstructures
Electrodeposition of Gradient Layers for Improved Impact Load Resistance
Local Graded Structure in 6.5wt%Si-Fe Alloy and the Effect on Ductility
Functionally Graded TiC-Based Cermets via Combustion Synthesis and Quasi-Isostatic Pressing
Fabrication of Al2O3-ZrO2~Ni Functionally Graded Pipes
A New Functional Material; Photonic Fractal
Synthesis of Nano ITO Powders Prepared by Solvothermal Process
Effective Permittivity of Composite with Core-Shell Type Inclusions by Self-Consistent Method
Infrared to Visible Upconversion Luminescence in Yb3+, Ho3+: Y2O3 Nanocrystalline Powders
Co-Precipitation Processing of Nanosized (Y,Gd)2O3: Eu Powder and Its Enhanced X-Ray Excited Luminescence
Ferroelectric Ceramics Related to BaTiO3 for Z5U Multilayer Capacitors
Molecular Organization of Nonlinear Organic Films Laminated by Langmuir-Blodgett Method
Properties of Cu-W Functionally Graded Materials Produced by Segregation and Infiltration
Influence of Dynamic Compaction on Structure and Mechanical Strength of Composite Spinel-Based (LiMn2O4, Li4Ti5O12) Foil Electrodes
Recent Development in Nano and Graded Thermoelectric Materials
Thermoelectric Properties of Poly(3-Alkylthiophenes)
Power Evaluation of PbTe with Continuous Carrier Concentration Gradient
Development of Thermoelectric Cooling Devices with Graded Structure
Multifunctional Applications of Thin Film Li Polymer Battery Cells
Feasibility Study of FGM Technology in Space Solar Power Systems (SSPS)
Manufacturing of Structured TiO2-Surfaces for Cell Carrier Application
Effects of the Thermal Residual Stress Field on the Crack Propagation in Graded Alumina/Zirconia Ceramics
Structure of Dental Resin-Based Adhesive Materials
Evaluation of Corrosion Resistance of Multi-Layered Ti/Glass-Ceramic Interfaces by Electrochemical Impedance Spectroscopy
Development of Multifunctional Materials (MFM): Bioabsorbable Drug-Releasing Hard Tissue Fixation Screws
Neutron Diffraction Studies of Functionally Graded Alumina/Zirconia Ceramics
Densification of Step-Graded Al2O3-Al2O3/ZrO2 Composites
Electrophoretic Deposition as a Novel Near Net Shaping Technique for Functionally Graded Biomaterials
Degradable, Multifunctional Polymeric Biomaterials with Shape-Memory
Micro-Arc Nitriding of Titanium Surface
Micro-Structural Characterization and Stress-Corrosion Cracking Behavior of a FGM Glass-Based Coating on Ti6Al4V for Biomedical Applications
A Process for Sintering of Diopside Prepared from Dolomite
Effect of Stabilised ZrO2, Al2O3 and TiO2 on Sintering of Hydroxyapatite
Development of Multifunctional NOx-Catalysts and -Sensors
The Use of Functionally Graded Poly-SiGe Layers for MEMS Applications
Full Form of the Near Tip Field for the Interface Crack between a Piezoelectric Material and a Thin Electrode
Head-On Immobilization of DNA Fragments on CVD-Diamond Layers
Stacking of Bi2Te3 and FeSi2 for Thermoelectric Applications
Control of Grading Structure and Thermal Conductivity of Wood by Compressing Process
Effects of Seeding on the Formation of Large NaX Zeolite Crystals
Mechanical Properties of TiO2-Kaolin FGM Produced by Progressive Lamination Method for NOx Reduction
Ceramic Foams Coated with Zeolite Crystals
Corrosion Resistance of Homogeneous and FGM Coatings
TiO2 Based Films Prepared by Sol-Gel Method for Advanced Water Treatment
Synthesis and Characterization of NaX Molecular Sieve Zeolite Films on Ceramic Paper for Membranes
Effects of Annealing Condition on the Preparation of Indium-Tin Oxide (ITO) Thin Films via Sol-Gel Spin Coating Process
The Synthesis of Indium Tin Oxide Nano – Powders by Solvothermal Process
Indentation of AlN/CrN Multilayers from Room Temperature to 400 °C
Fabrication of Nanostructure Composites in Functionally Graded Coatings with Supersonic Free-Jet PVD
Functionally Graded Coatings of Carbon Reinforced Carbon by Physical and Chemical Vapour Deposition (PVD and CVD)
Interaction between Ti-6%Al-4%V Alloys and Hardmetals Coated by Cathodic-Arc Technology
New Multifunctional FGM Coatings Produced Using ESA and TRESS Methods
A Simple Galerkin Boundary Element Method for Three-Dimensional Crack Problems in Functionally Graded Materials
Three Dimensional Fracture Analysis of FGM Coatings
Time-Dependent Behavior and Fracture of Functionally Graded Thermal Barrier Coatings under Thermal Shock
Fracture Analysis of Functionally Graded Thermal Barrier Coating with Interface Crack by Computational Micromechanics Method
A Multiscale Framework for Elastic Deformation of Functionally Graded Composites
Interaction between an Embedded Crack and an Interface Crack in Nonhomogeneous Coating System
On Accurate Numerical Evaluation of Stress Intensity Factors and T-Stress in Functionally Graded Materials
Mixed-Mode Crack Propagation in Functionally Graded Materials
Machining FGM: Residual Stresses Redistribution
Finite Element Simulation of Microstresses in a Traditional FGM: The Case of Soft Tribo-Alloys
Thermo-Mechanical Analysis of RLV Thrust Cell Liners with Homogeneous and Graded Coatings
Design of Functionally Graded Structures Using Topology Optimization
Optimization of Material Composition of FGM Coating under Steady Heat Flux Loading by Micro-Genetic Algorithms
Dynamic Fracture of Functionally Graded Composites Using an Intrinsic Cohesive Zone Model
The Optimization of Propagation Characteristic of Elastic Wave in FGM
Numerical Simulation of a Centrifugal Process to Fabricate Permittivity Graded FGM from Alumina/Epoxy Mixture
Numerical Simulation of Laser Induced Modification Processes of Ceramic Substrates
Design Model and Prediction Model on Preparation of Functionally Graded Material by Co-Sedimentation
Stress Analysis of Powder Compacts with Graded Structures in Sintering Process
Computer-Integrated Safe Design of FGM Component for Hip Replacement Prosthesis
Optimal Design of Graded Materials in 3-D Heat Transfer
Creep Response of Ceramic/Metal Functionally Graded Thermal Barrier Coating
Fabrication of Permittivity Graded Epoxy Resin with Non-Uniform Dispersion of Alumina Fillers by a Centrifugal Procedure
Modeling of Segmented Peltier Cooling with Discrete and Continuous Concentration Function
The Propagation Characteristic of Viscous-Plastic Wave in Functionally Graded Layer
Thermodynamics and Microstructure of Co-V8C7 Alloy
Tribolayer Formation as a Functionally Self-Grading Process in Soft Anti-Friction Alloys
Precipitation in Plasma Nitrided Fe-M(M=Ti, V, Al) Alloys
Appraisement of Creep Properties of 12Cr1MoV Steel by Small Punch Creep Test Method
Effective Thermal Conductivity of MoSi2/SiC Composites
The Correlation between Hardness and Yield Strength of Hard Materials
Using the Image Analysis Program for Prediction of Thermal Stability Behavior of Refractory Specimen
Thermal Transport Properties of Stainless Steel/Zirconia Compacts as a Function of Composition and Temperature
Fracture and Fatigue Crack Propagation in Graded Composites
Strength Distributions in Ceramic Laminates
Seebeck Scanning Microprobe for Thermoelectric FGM
Investigation of Nano-Size TiO2 Powders: Structure and Particle Size Aspects
Creep Property of Functionally Graded Materials
Fabrication and Mechanical Properties of TZ-3Y20A /Mo Multilayer Composites
Particle Distribution and Orientation in Al-Al3Zr and Al-Al3Ti FGMs Produced by the Centrifugal Method
Regularities of Composite Materials with Micrograded Grain Structure Formation
Evaluation of SiC-Particle Connectivity in Functionally Graded Al/SiCp Composites by Synchrotron Radiation Holographic Microtomography
Electron-Probe Microanalysis: Some Revelations in the Investigation of Defects in Steel Products
Certified Reference Materials for the Characterisation of Multifunctional Materials
Stress Relaxation on Polished Cross-Sections of Al2O3/ZrO2 FGM Discs Measured by Raman Spectroscopy
Experimental Characterization and Computational Simulation of Glass-Alumina Functionally Graded Surfaces
Determining the Elastic Moduli of the Individual Component Layers of Cylindrical Thermal Barrier Coatings by Means of a Mixed Numerical - Experimental Technique
Polyimide Surface Modification by Low Energy Ion Beam Irradiation
Microstructure of Al2O3-Fe FGM Obtained by Modified Slip-Casting Method
Layered Boron Carbide-Aluminum Composites with Large Changes in Microstructure
Steel Parts with Tailored Material Gradients by 3D-Printing Using Nano-Particulate Ink
Combustion Synthesis of Dense Functionally Graded B4C Reinforced Composites
Formation of Compositional Gradient during Fabrication of FGMs by a Centrifugal In Situ Method
Toughness Enhancement of Al2O3/Ce-TZP Functionally Graded Materials by Annealing in Inert Atmosphere
Processing of a Graded Ceramic Cutting Tool in the Al2O3-ZrO2-Ti(C,N) System by Electrophoretic Deposition
Development of Square-Shaped Large-Size WC/Co/Ni System FGM Fabricated by Spark Plasma Sintering (SPS) Method and Its Industrial Applications
Strong Localization of Electromagnetic Wave in Epoxy/Ceramic Photonic Fractals with Mengersponge Structure Fabricated by Stereolithography
Sintering Behavior of Multimodal Ceria Powder Mixtures for Fuel Cell Applications
Synthesis and Characterization of Large NaX Zeolite Crystals by Continuous Crystallization
Graded Microstructure at Fiber / Copper Matrix Interface in FRM Fabricated by the Reaction at Narrow Holes Method
Effect of Microwave Heating on the Synthesis of Layered Double Hydroxide
Preparing 3D Functional Gradients for SLS
Fabrication and Characterization of Porous Alumina Tube with Pore Gradient
Technology of Low Cost Production of FGMs
Porous Graded Materials by Stacked Metal Powder Hot-Press Moulding
Joining of OFC to TC4 and Structural Control of Joint Interface
Suspension Development for Colloidal Shaping of Al2O3-ZrO2 FGMs
Influence of Al2O3 Addition on the Microstructure and Mechanical Properties of Pressureless Sintered Ce-TZP
