Vilarinho Advanced Materials Forum III

Erscheinungsjahr 2006
ISBN: 978-3-03813-044-4
Verlag: Trans Tech Publications
Format: PDF
Kopierschutz: 0 - No protection

E-Book, Englisch, 1840 Seiten

Volume is indexed by Thomson Reuters CPCI-S (WoS).The aim of this book is to provide the reader with the latest advanced research results on, and an improved understanding of, various aspects of the processing and characterization of materials.

Autoren/Hrsg.

Vilarinho, Paula M.

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde

Inhaltsverzeichnis

Multifunctional Thin Film Zinc Oxide Semiconductors: Application to Electronic Devices
Novel Organic Hole Transport Layers for Molecular Electronic Systems
Insights on Amorphous Silicon Nip and MIS 3D Position Sensitive Detectors
The Study of High Temperature Annealing of a-SiC:H Films
Microstructure and Thermal Features of a-Si:H and nc-Si:H Thin Films Produced by Rf Sputtering
Poly-Si Thin Film Transistors: Effect of Metal Thickness on Silicon Crystallization
Organic Materials for Active Layers in Transistors: Study of the Electrical Stability Properties
Structural and Optical Characterization of Light Emitting InGaN/GaN Epitaxial Layers
Effect of Oxidant/ Monomer Ratio on the Electrical Properties of Polypyrrole in Tantalum Capacitors
Electrical Imaging Map on Polycrystalline Diamond Films and Diodes and Structural Relationship Obtained by Micro-Raman
Electrical Properties of Fluorine Doped Diamond Like Carbon
Electrical Performances of Low Temperature Annealed Hafnium Oxide Deposited at Room Temperature

Role of Hydrogen Plasma on the Electrical and Optical Properties of Indium Zinc Transparent Conductive Oxide
A Study on the Electrical Properties of ZnO Based Transparent TFTs
Thermoreactivity of Sol-Gel Precursor for ZnO-Based Thin Films
Carrier Transport Investigation on Organic Semiconductor by Electrical DC and AC Measurements: the Case of Alq3
Study of Electrochromic Devices Incorporating a Polymer Gel Electrolyte Component
Electroplating of Iron Films: Microstructural Effects of Alkaline Baths
Cu(In,Ga)Se2 Prepared by a 2 and 3-Stage Hybrid RF-Magnetron Sputtering and Se Evaporation Method: Properties and Solar Cell Performance
Push-Pull Tricyanovinyl-Substituted Thienylpyrroles: Synthesis, Solvatochromic and Electrochemical Properties
Donor-Acceptor Substituted Thienylpyrrole Azo Dyes: Synthesis, Solvatochromic and Electrochemical Properties
Organically Modified Silica-Based Xerogels Derived from 3-Aminopropyltrimethoxysilane and 3-Isocyanatepropyltriethoxysilane through Carboxylic Acid Solvolysis

Photoluminescence of Di-Ureasil Hybrids Doped with Silica Coated Ag Nanoparticles
Photoluminescence Changes Induced by Self-Organisation in Bridged Silsesquioxanes

Preparation of Photoluminescent Materials from a Lanthanide-Doped Microporous Titanosilicate Precursor
Photoluminescence of Nanocrystalline Bismuth Titanate Thin Films Synthesized by the Sol-Gel Method

EPR and TEM Characterization of Electroluminescent Alq3
Photoinduced Effects in EPR Spectra of Copper Doped Potassium Tantalate
Iron Oxide and Oxide-Hydroxide Nanoparticles in Organic-Inorganic Matrices
New Fluorescent Heterocyclic Materials: Synthesis, Solvatochromic and Fluorescence Properties
EPR and Optical Absorption Investigations of Photochromic Effect in Nearly Stoichiometric LiNbO3:Fe
Thermoelectric Properties of Bi2Te3/Sb2Te3 Thin Films
High Field Polarization Response in Ferroelectrics: Current Solutions and Challenges
Low Pressure RF Plasma Jet Sputtering Technique Applied to Ferroelectric Films: Ba1-x SrxTiO3
Texture – Property Relationships in Bi-Layered Ferroelectric Ceramics: A Case Study of SrBi2Ta2O9
Relaxor-Like Behavior of Self-Polarized Pb(Zr,Ti)O3 Thin Films
Synthesis and Dispersion of PZT Ultra-Fine Powders

Growth of Lead Zirconate Titanate Single Crystals by the High Temperature Solution Method
Effect of Lead Content and B-Site Substitutions on Dielectric and Piezoelectric Properties of PZT Ceramics
Optical Properties of PLZT 9/65/35 Thin Films on ITO-Coated Glass Substrate
Design and Analysis of the PZT-Based Piezoelectric Transformer

Separation of the Pyro- and Piezoelectric Response of Electroactive Polymers for Sensor Applications

Structural Characterization of Lead Metaniobate Thin Films Deposited by Pulsed Laser Ablation
Ferroelectric and Dielectric Characteristics of Bi3.25La0.75Ti3O12 Thin Films Prepared by the Polymeric Precursor Method

Anomalous Broad Dielectric Dispersion of 0.4PZN-0.3PSN-0.3PZN Relaxor Ceramics at Lower Temperatures

Development of an Ultrasonic Motor Based on a Piezoelectric Ceramic Sandwiched between Two Laminate Composite Plates

Piezoelectric Material for High Efficiency Ultrasonic Siren
The Characterization of Two Dimensional Electrostrictive CuInP2S6 Materials for Transducers
Dielectric Investigations and Theoretical Calculations of Size Effect in Lead Titanate Nanocrystals

The Influence of DC Bias on the Dielectric Response of Sr1-xCaxTiO3 Ceramics
Bi Effect on the Microstructure and Dielectric Properties of SrTiO3 Thin Films
Processing and Characterization of (1-x)(Na1/2Bi1/2)TiO3 - xLa(Mg1/2Ti1/2)O3 Ceramics

Microstructure Characterization and Dielectric Properties of La4Mg3W3O18 Layered Oxide

Study of the High Frequency Dielectric Properties of SrBi2 Ta2O9 Ferroelectric Thin Films
V2O5-Doped M2+Cu2Nb2O8 Compounds (M2+= Zn, Co, Ni, Mg & Ca) for Microwave Dielectric LTCCs
TEM and XRD Investigation of MnO2 Microstructure and its Influence on ESR of Ta Capacitors
Effect of NaNbO3 Crystalline Aggregates on the Electrical Properties of SiO2-Na2O-Nb2O5 Glass-Ceramics
Ferromagnetism and Ferromagnetic Resonance in Mn Implanted Si and GaAs
CVD of CrO2 Thin Films: Influence of the Deposition Parameters on their Structural and Magnetic Properties
Cd-Doped LaMnO3 Manganites Prepared by the Sol-Gel Technique
The Effects of Ca and Mn Excess Co-Doping in CMR Manganites Solid Solution Structures
Tuning of Magnetocaloric Effect in Ferromagnetic La-Sr Manganites through Er and Eu Doping
Structural and Magnetic Properties of Chemically Deposited Hexaferrites
Spin Reorientation Transition and Exotic Magnetism in Dilute Gd1-xYx Single Crystals (x < 0.1) Revealed by A.C. Magnetoresistance Studies
X-Ray Diffraction Study of Ordered Antiferromagnets for Tunnel Junctions
Analysis of Phase Transitions in La and Nd Substituted YIG with Magnetic Disaccommodation Measurement
Heat Generation in Tunnel Junctions for Current-Written Pinned Layer Switching
Synthesis of BiFeO3 Ceramic Targets and Thin Film Deposition by Laser Ablation
Preparation and Properties of New Superconductor Material MgB2
The Effect of Annealing Temperature on the Transport Properties of BSCCO Fibres Grown by LFZ and EALFZ
The Growth of SiC Crystals from CoSi Molten Alloy Fluxes
Characterization of Nickel Implanted a-Al2O3
Three-Dimensional Dispersion of Nano-Fillers in Soft Composite as Revealed by Transmission Electron Microscopy/Electron Tomography (3D-TEM)
Effect of Wheel Speed and Boron Content on Microstructure and Crystallographic Texture of Boron Substituted Sm-Co Melt Spun Ribbons
Local Vibrations of Substitutional Carbon in SiGe Alloys
Chromatic Dispersion in Ge-Doped SiO2-Based Single Mode Fibres due to Temperature Dependence of the Ultraviolet Absorption: Numerical and Experimental Results
Oxygen Evolution on Perovskite-Type Cobaltite Anodes: An Assessment of Materials Science-Related Aspects
Oxygen Nonstoichiometry and Ion-Electron Transport in SrFe0.9M0.1O3-d (M=Cr, Ti, Al)
Transport Properties and Thermal Expansion of SrCe(Y)O3-d Ceramics
Conductivity of La- and Pr- Doped Bi4V2O11
Defect Formation in La2Ni(M)O4+d (M= Co, Cu): Modelling and Coulometric Titration Study
Mixed Conductivity of Ce- and Nb-Substituted (La, Sr)FeO3-d
The Ion Conducting Properties of Perovskite-Type Solid Solutions (La0.5Li0.5) [Ti1-x(M0.5Nb0.5)x]O3 (M = Al, Ga)
Oxygen Permeability of Mixed Conducting Perovskite Lanthanum Gallate-Based Ceramics
Microstructure and Electrical Conductivity of Yb2+xTi2-xO7-x/2 Materials
New Oxide-Ion Conductors Ln2+xTi2-xO7-x/2 (Ln = Dy – Lu; x=0.096)
Importance of Textural Characteristics in the Adsorption of Hydrogen onto Activated Carbon and Activated Carbon Fibers
Structural and Magnetic Properties of New Zr(Fe0.8Cu0.2)2 and Zr(Fe0.8Cu0.1Co0.1)2 Hydrogen Storage Materials
Investigations of Membrane Electrolytes for PEM Fuel Cell Applications
Quality Control of Fuel Cells Channels
Phase Separation on GaInAsSb Films for Thermophotovoltaic Devices
Electrocatalytic Properties of La2Mg17 Based Metal Hydride Electrodes
Preparation and Characterization of Pd-Black Films for Electrocatalysis
Structure and Electrochemical Characterization of Electrolytic Ni-Co-P and Ni-W-P Layers
Electrochemical Production and Characterization of Ni-Mo, Ni-Mo-P and Ni+Mo Coatings
Hydrophobic Porous Benzene-Silica Hybrid Clay Heterostructure and Its Application in the Adsorption of Volatile Organic Compounds

Optimization of Deposition Parameters for Thin Silicon Films on Flexible Substrates in a Hot-Wire Chemical Vapor Deposition Reactor
Joining of Gamma-Based Titanium Aluminides – A Review
Laser Developed Al-Cr Surface Alloys: Microstructure, Mechanical and Wear Behaviour
Characterization of Powder Metallurgy (PM) Nickel Base Superalloys for Aeronautical Applications
Phase Transformation and Structural Studies of EUROFER RAFM Alloy
Effect of Aluminising on the Hot Corrosion Resistance of Nickel-Chromium Alloys
Microstructural Characterization of 5083 Al Alloy Joints Friction Stir Welded
Selective Laser Melting of Prealloyed High Alloy Steel Powder Beds
Nitrogen Effect in Microstructural Parameters of a Cast Duplex Stainless Steel
Effect of Vanadium and Carbon Content on the Sinterability of Water Atomised High Speed Steel Powders
Comparative Study of the Additional Hardening Effects of Three Structural Steels
Effect of the HAZ Microstructural Gradient on the Unstable Fracture Behaviour of Welds in a High Strength Steel
Study of Abrasion Resistance of Steels by Micro-Scale Tests
Phase Formation in Austenitic Stainless Steel A-TIG Welds
Texture and Evolution of Recrystallization in Low Carbon Steel Wire
Residual Stress Evaluation on X 36 Cr Mo 17 HSM Finished Mould Steel
Surface Integrity of H13 ESR Mould Steel Milled by Carbide and CBN Tools
Low-Pressure Injection Molding Processing of AISI T15 High Speed Steel Powders
Fatigue Properties of a Ck45 Steel Coated with a Post-Heat Treated Ni-Cu-P Electroless Deposit
Application of Advanced Multiphase Steels in Crashworthiness Structures: Experimental Study and Constitutive Equations
Transverse Rupture Strength of M3:2 High Speed Steel Produced through Conventional Casting and Powder Metallurgy Techniques
Dislocation Microstructure in Copper Multicrystals Deformed under the Sequences: Rolling - Tension and Tension - Rolling
Magnesium Removal from TiC-TiB2 SHS-Powders by Controlled Hot Acid Leaching
Aluminothermic Reduction of Niobium Pentoxide in a Hydrogen Plasma Furnace
Statistical Modelling of the Particle Size Composition of an Alumina Matrix for No-Cement Self-Flowing Refractory Castables
Formation of Ti-Matrix Composites for Lightweight Structural Components by Mechanical Alloying and Subsequent Annealing
Analyses of Composite Structures Behaviour with Embedded Bragg Grating Sensors
Mechanical Properties of Particle Reinforced Resin Composites
Residual Strength after Low Velocity Impact in Carbon-Epoxy Laminates

The Signal Characteristics of the Spectral Response of Bragg Grating Sensor Embedded in Composite Laminated after the Cure Process
Effect of the Ni Chemical Distribution on the Reactivity and Densification of WC-(Fe/Ni/Cr) Composite Powders
Electroconductive Ceramic Composites for Cutting Tools

Physical Cutting Model of Polyamide Composites (PA66 GF30)
Shrinkage Behaviour of Borosilicate Glass-Al2O3 Composites during Isothermal Sintering

Fatigue Notch Sensibility of Thermoplastic Glass Fibre Composites
The Oxidation Behaviour of TiC Matrix Ni3Al and Fe40Al Toughened Composites at High Temperatures
Mechanical Performance of Unsaturated Polyester Resins Modified with Powder from Scrap Tyre Rubber
Intermetallic Hydrides Based on (Zr-Ti)(Fe-Cr)2 Type of Compounds
Effect of Paraffin Oil Used as a Lubricant in Tensile Tests of Carbon Fibre Bundles
Consolidation of Glass Fibre-Polypropylene Towpregs by Compression Moulding
Influence of the Deposition Parameters on the Properties of Bis-Triethoxysilylpropyl] Tetrasulphide (BTESPT) Layers on AA2024-T3 – An Ellipsometric Study
The Influence of the Addition of Ti on the Mechanical Properties of W-S-Ti Coatings
Thermal Cycling Treatment and Structural Changes in Cu-Al-Ni Monocrystalline Alloys

Microstructure and Mechanical Properties of Friction Stir Welds in Aluminium Alloys 2024-T3, 5083-O and 6063-T6

The Influence of Austempering Heat Treatment Variables on Dimensional Changes of a Ni-Cu Ductile Iron
Preparation of Dispersion-Strengthened Coppers with Niobium Carbide and Niobium Boride by Mechanical Alloying
Foaming around Fastening Elements
Lead Hardening by Oxide Dispersion

Laser Cladding of Ni Based Cermets
Laser Cutting of Glass Tubes

Laser Drilling of Natural Stones
Laser Powder Deposition of Tool Steels: Strategies Leading to Homogeneous Parts
Characterisation of Elastoplastic Behaviour Using Spherical Indentation
In-Situ Friction Monitoring of Self-Mated CVD Diamond Coatings Using Acoustic Emission
Calculations of the Thermal Conductivity of Porous Materials
Creep Behaviour of Si3N4 Ceramics Sintered with RE2O3
Thermal Shock Behaviour of Open-Cell Cordierite Foams
Evaluation of Welding Residual Stresses Using the Incremental Hole-Drilling Technique

Green and Sintered Properties of Consolidated Mixtures of Mechanically Alloyed and Elemental Al Powders

Assessment of Particle Clustering in MMCs by Quantitative Image Analysis
Wear Resistance of Powder Hard Metal Inserted Ductile Iron
Damage Mechanisms Identification in FRP Using Acoustic Emission and Artificial Neural Networks

Development of an Optic Fibre Sensor System for Acoustic Emission Sensing in FRP
On the Evaluation of the Mechanical Behaviour of Structural Glass Elements
A Multi-Level Low Cycle Fatigue Damage Model for Forging Die Material
Influence of the Interaction Potential Parameters on the Mechanical Response of Simulated Semi-Crystalline Polymeric Materials
Determination of Elastic Modules in Dependence on Orientation by the Resonant Beam Technique
On the Structural Evaluation of Unbiased W-O-N Sputtered Coatings
Processing-Microstructure-Properties Relationships in Extrusion of Thermoplastics
Dynamic Vulcanisation of EPDM-Based Thermoplastic Vulcanisates during Extrusion: Effect of Processing Conditions
Synthesis and Characterization of New Polyurethane Adhesives
Optimization of Deformable-Adhesive Application on the Chip-Apply Process
Transient Rheological Behaviour of PA6/EPM/EPM-g-MA Blends
Non-Conventional Injection Moulding of a PP/PC-ABS Blend
Polyurethane-Polyurea Membranes for Blood Oxygenation
Novel Multilayer Coatings on Polyethylene for Acetabular Devices
a- to ß Transformation on PVDF Films Obtained by Uniaxial Stretch
Influence of Diene Content on the Photodegradation of Ethylene-Propylene-Diene (EPDM) Elastomers
The Influence of Material Density on Bipolar Charge Transport in Polymer-Based Electronic Applications
Influence of Catalyst Type on Biocompatibility of Polyurethanes
Open Cell Polyurethane Foams for New Filters with Supported Adsorbents

Plastic Behaviour of Copper Polycrystal Subjected to Fatigue-Tension Sequential Loading Tests
Thermogravimetric Study of Polyethylene Catalytic Degradation by Zeolites

Sorption of Sodium Dodecyl Sulfate by Polyaniline-Cellulose Acetate Blends: Equilibrium and Kinetic Studies
Electromechanical Characterization of a Biosensitive and Electroactive Polymer Membrane
Electrical and Microstructural Changes of ß-PVDF under Uniaxial Stress Studied by Scanning Force Microscopy
Electric Field Strength Dependent Electric Conductivity in Highly Insulating Materials
Thermoelectrets from Poly(acrylonitrile) Thin Films: A Trapped Charge Stability Study

The Influence of the Ambient Gas Environment on the Non-Isothermal DC Electric Measurements in Polymers
Space Charge Studies in XLPE from Power Cables Using Combined Isothermal and Thermostimulated Current Measurements
Study of Electrical Properties of Natural Cork and Two Derivative Products
Piezoelectric and Optical Response of Uniaxially Stretched (VDF/TrFE) (75/25) Copolymer Films

Effect of Poling on the Mechanical Properties of ß-Poly(Vinylidene Fluoride)
Optical Properties of 3,4,9,10-Perylenetetracarboxylic Dianhydride and 8-Hydroxyquinoline Aluminum Salt Films Prepared by Vacuum Deposition
Immobilization of Thrombin Inhibitors on Polyesters Surface: An Original Approach towards Materials Blood Compatibilization
Formation of Bone-Like Apatite on Polymeric Surfaces Modified with -SO3H Groups
Biomorphic Silicon Carbide Ceramics Coated with Bioactive Glass for Medical Applications
Scale-up of Poly[(Vinyl Chloride)-b-(n-Butyl Acrylate)-b-(Vinyl Chloride)] prepared by Living Radical Polymerization
Bone Tissue Engineering Constructs Based on Starch Scaffolds and Bone Marrow Cells Cultured in a Flow Perfusion Bioreactor
Bioactive Composite Materials for Bone Tissue Applications
Study of the Fosfosal Controlled Permeation through Glutaraldehyde Crosslinked Chitosan Membranes
Enzymatic Degradation Behaviour of Starch Conjugated Phosphorylated Chitosan
Physicochemical Characterization of Novel Chitosan-Soy Protein/ TEOS Porous Hybrids for Tissue Engineering Applications
Preparation and Characterization of Chitosan-Based Scaffolds for Biomedical Applications

Liquid Crystalline Behaviour of Chitosan in Formic, Acetic, Monochloroacetic Acid Solutions
Synthesis of N-Carboxymethyl Chitosan Beads for Controlled Drug Delivery Applications

Influence of Molecular Weight and Crystallinity of Poly(L-Lactic Acid) on the Adhesion and Proliferation of Human Osteoblast Like Cells

Optimization of the Synthesis of Hydroxyapatite Powders for Biomedical Applications Using Taguchi's Method
Influence of Substrate Temperature in Plasma Assisted Pulsed Laser Deposition of Hydroxyapatite Thin Films
New LDPE Copolymeric Films with Enhanced Hydrophilic Properties Prepared by Gamma Irradiation
Effect of Glass Ceramic Crystallinity on the Formation of Simulated Apatite Layers
Surface Treatment of Hum