Yuan / Xu / Zuo Advances in Machining & Manufacturing Technology VIII

Erscheinungsjahr 2006
ISBN: 978-3-03813-074-1
Verlag: Trans Tech Publications
Format: PDF
Kopierschutz: 0 - No protection

E-Book, Englisch, 900 Seiten

Volume is indexed by Thomson Reuters CPCI-S (WoS).This work presents its readers with the most recent advances in the fields of machining and advanced manufacturing technology. It will be of especial valuable to production and research engineers, research students and academics.

Autoren/Hrsg.

Yuan, Zhe Jun

Xu, Xi Peng

Zuo, Dun Wen

Yuan, Ju Long

Yao, Ying Xue

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde

Inhaltsverzeichnis

A Methodology of Off-Line Optimization for NC Milling Process
Experimental Study on Ultrasonic Grinding and Polishing for Large-Scale Silicon Wafer
The Research on the Method of Ultrasonic and Electric Spark Combined to Machine Diamond Cupping Mould

The Influence of Grinding Parameters on the Superficial Hardening Effect of 48MnV Microalloyed Steel

Virtual Reality in Optimizing the Groove of Blade
Research on High Speed Ball-End Milling Forces
Framework and Modeling of Networked Manufacturing for Automobile Die
Primary Study of Polishing with Flotative Abrasive Balls
Effect of TiN Addition on the Low Temperature Degradation of Ceramic Tool Materials 3Y-TZP

Experimental Study on Green Cutting with Water Vapor as Coolant and Lubricant

Research on Vibration Tapping of Hardened Steel
Research on Theory and Technique of Point Form Grinding for Quadratic Surface Flank of Twist Drill

Corrosion Resistance of TC4 Alloy Implanted by La+, Mo+
Double-CCD Stereoscopic Vision System Monitoring Chip Shape
Machining Accuracy Enhancement by Modifying NC Program
Dynamic Calibration of Metal Cutting Dynamometer
Experimental Research on Technology of Ultrasonic Vibration Aided Electrical Discharge Machining (UEDM) in Gas

Neuron Optimization Based PID Approach for Cutting Force Control

FEA and Precision Machining on Ceramic Plunger Couple
Friction and Wear Behaviors of Three Ceramic Composite
Volumetric Positioning Errors of CNC Machining Tools and Laser Sequential Step Diagonal Measurement

Sawing of Granite with Side-Slotted Diamond Segments
Study on the Wear and Breakage of PCD Tools for Turning Si-Al Alloy Pistons
Quality Analysis of Pulsed Laser Cutting of Superalloy Sheet
Study on the Multi-Scale Nanocomposite Ceramic Tool Material
Effect of Nano-Scale Al2O3 on Mechanical Properties of TiB2 Ceramic Tool Materials

Theoretical Analysis on the Machining Mechanism in Ultrasonic Vibration Abrasive Waterjet

A Study on Design of Ultra-Precision Micro-Feed Stage
Study on High-Speed WEDM in Gas

FEM Simulation of the Residual Stress in the Machined Surface Layer for High-Speed Machining

Cutting Temperature in High Speed Milling of a Near Alpha Titanium Alloy
Simulation of Velocity Field of Two-Phase Flow for Gas and Liquid in the Abrasive Water Jet Nozzle

Effect of Nano-Scale TiN on the Mechanical Properties and Microstructure of Si3N4 Based Ceramic Tool Materials

Nanomechanical Properties of Single-Crystalline Silicon Wafer Irradiated by High-Energy Femtosecond Laser Pulses

Thermal Characteristics of the Headstock System on the NC Precision Lathe
A Parametric Interpolator with Smooth Kinematic Profiles for High Speed Machining
The Application of FEM Technology on the Deformation Analysis of the Aero Thin-Walled Frame Shape Workpiece

Interference-Free Tool Path Generation for 5-Axis NC Machining with a Flat-End Cutter

Forces in Surface Grinding of Granites with a Brazed Diamond Wheel
Study on Surface Quality of Nano ZrO2 Ceramics in Grinding by the Aid of Ultrasonic Vibration

The Development of Special Drills for High-Efficient Drilling Austenitic Stainless Steel Part I: Drill Comparison and Experiment Research

The Development of Special Drills for High-Efficient Drilling Austenitic Stainless Steel Part II: Coating Selection and Experiment Research

Deposition of Diamond Films on Smooth Surfaces of Cemented Carbide Inserts with Cobalt Boride Interlayers
Fabrication and Application of Diamond-Coated Bearing Support Implements
The Design of Noncircular Gear of Constant Pressure Angle and the Realization of Its Wire-Electrode Cutting

Investigation on the Cutting Performance of a New Kind of Nickel-Based Super Alloy

ELID Grinding Based on the State Control of Passivating Films
Electronic Subdividing Method for Linear Encoder of High Speed Position Detection
Numerical Simulation of Machining Distortion of Residually Stressed Aircraft Aluminum Components
Experimental Study on the Laser Direct Fabrication of Stainless Steel Components
The Application of Cryogenic Pneumatic Mist Jet Impinging in High-Speed Milling of Ti-6Al-4V

Study on Non-Burr & Sharp-Edge Protecting Grinding Method of Functional Edge

Research on Field-Induced Oxidation Processing Technology by Contact-Mode AFM in Ambient Air

Research on Properties and Formation Mechanism of Ceramic Coatings Prepared by Micro-Arc Oxidation on 2024 Aluminum Alloy Surface

Study on the Testing Technology of Main Residual Stress of Metal Sheet Based on Soft X-Ray Diffraction Stress Analyzer

The Effects of Rare Earth on the Hot Pressing of Cu-Sn-TiH2 Bonded Diamond Composites
Modeling and Real-Time Compensation of Cutting Force-Induced Errors on NC Turning Center

Visualized Characterization of Slurry during CMP Based on LIF
Research on Ultra-Precision Lapping Technology for Super-Smooth Surface of KTP Crystal

Study on the Mechanism of the Continuous Composite Electroplating Polishing for Silicon Wafer

The New Technology of Floating Polishing of Large Die Surfaces
Study on the Thermal Shock Resistance of Si3N4/TiC Nanocomposite Ceramic Tool Materials

Modeling of Material Removal in Workpiece Lateral Ultrasonic Vibration Grinding of Fine-Crystalline Zirconia Ceramics

Analyses on the Solution Areas of Multi-Point Machining Constraints
Study on Motion Model of Abrasive Particle and Surface Formation Mechanics under Two Dimensional Ultrasonic Grinding

Cutting Parameters Optimization of High-Speed Milling of Thin-Walled Graphite Electrode

Application of the Restoration Algorithm of Cutting Tool Images Based on Fuzzy Theory to Monitor Tool Wear Condition

PCBN Tool Wear Mechanism in Interrupted Hard Turning SAE8822 Hardened Steel

PCBN Tool Wear Mechanism in Hard Turning Hardened Bearing Steel
The Analysis and Calculation of Shock Track during Laser Shock Forming
Selective Laser Sintering of Multi-Component Cu-Based Alloy for Creating Three-Dimensional Metal Parts

Modal Analysis of Circular Diamond Saw-Blade for Deep Sawing of Granite

Performance Evaluation of Electro-Rheological Fluid and Its Applications to Micro-Parts Fine-Machining

Balling Process in Selective Laser Sintering 316 Stainless Steel Powder
A Study on Ontology-Based Modeling Technologies for the Construction Machinery Conceptual Design Knowledge Management

Identification Method of Structure Transfer Function for Machine Tools Based on Pseudo-Random Process

Generation Process of Nanometric Machined Surfaces of Monocrystalline Cu

The Development of the Precise Double Sided Polishing Machine
Prediction of Precision Hard Cutting Force Based on Unit Cutting Model
Effect of DC-Plasma Arc Behavior on Growth of Diamond Film
Analysis of Reversible Fine Machining Sequence Effect on Surface Integrity
Recent Development of Abrasive Water Jet Machining Technology
Research and Development of High Speed Cutting Tribology
Study on Mechanical Properties of Cermet Materials Fabricated from Ternary Boride Cladding on Both Sides Surface of Steel Substrate

Intelligent Matching of Cutting Tools with Workpiece Materials
Numerical Simulation of Stretch Bending Process and Springback for T Section Aluminum Extrusions

Arc Envelope Truing of Metal-Bonded Diamond Grinding Wheel by Use of Cone-Shaped Truer

A New Method of Structural Synthesis about the Partly-DOF Parallel Robot Mechanisms Based on the Screw Theory

Research in Method of Reliability Optimization Based-On Multi-Objective Fuzzy Matter-Element with Fuzzy Chance Constraint

Silicon Atomic Layer Deposition on Nanocrystalline Diamond
Dynamic Characteristic of HSK Tooling System
Pulse Electric Current Sintering of Iron-Base Powders Prepared by High Energy Milling

Design and Performance Study of a 3-DOF Micropositioning Table
Relation Study of Roughness and Glossiness to Fractal for Granite Surface Profiles

Experimental Research on High-Speed Machining Pearlitic Gray Cast Iron
Study on EDM Polishing of CVD Diamond Films
Development of an Integrated Instrument for Nucleic Acid Pyrosequencing Detection

Monitoring of End-Mill Behavior with Its Projection Image
Job-Shop Scheduling Method Based on Modified Immune Algorithm
Research on Ultra-Low Feed Servo Control Technology of Ultra-Precision Machine Based on Semi-Closed Loop Control

Direct Joining of Acrylic Rubber to Cast Iron with Functional Nanofilm by Polymer Plating

Application of Artificial Neural Net in Defect Image Recognizing of Cutting Chip
Genetic-Based Optimal Design of a PID Controller for Substrate Temperature in a HFCVD System

Electrode Characteristics of High Pressure Synthetic High Boron Doped Diamond
Study on Deformation Behaviors of LD31 (6063) Aluminum Alloy Sheet by Oblique Angle Laser Shock

Research on Energy Saving EDM Pulsed Power Supply with Cyclically Superimposed Chopper Circuit

Creep Feed Surface Grinding NC Technology by Cup Wheel in Radome Machining

Study on Pre-Stress Hard Cutting of Bearing Races
Numerical Analysis on Hybrid High Speed Sleeve Bearing
Ultraprecision Cutting of Glass BK7
Researches and Simulations on Hydrodynamic in Super High Speed Grinding Area

Study of Inhibition to Leaching of Cobalt from Cemented Carbide Tools
A Two-Dimensional Fast Tool Servo Used for Real Time Error Compensation in Taper Turning

Development of a New Virtual Environment System for Assembly
Influence of Polishing Parameters on Chemical Mechanical Polishing Processes of LiTaO3 Wafer

The Control System Construction of the Multifunctional Combined CNC Machine

Research on Endless Wire Saw Cutting of Al2O3/TiC Ceramics
Nano-SiC Particles Reinforced Plasma Sprayed WC-Co Coating by Laser Melting Process

Study on the Complex Tools Coating Technology by EDM
Machinability for Turning of 1Cr18Ni9Ti Austenitic Stainless Steel with Ceramic Tool

Tool Wear Characteristics in High Speed Milling of Ti-6Al-4V Alloy with Nitrogen Gas Medium
Investigation of Manufacturing Technology in Electroplating CBN on Gear-Honing-Tool

Study on Precision Control of Direct Metal Forming
Research on Software Error Compensation of Ultra-Precision Lathe
The Mechanism and Experimental Study on Laser Peen Forming of Sheet Metal

Ultra-Speed Plastic Deformation of TC6 Sheet Induced by Laser Shock Loading

Optimization of Cutting Conditions in Ultra-Precision Turning Based on Mixed Genetic-Simulated Annealing Algorithm

A New Fuzzy Variable Structure Control of a Type of Nonlinear Multivariable System

The Image Similarity Analysis Technique Applied to the Tool Wear Monitoring in Face Milling

Thermal Shock Resistance of a New Ceramic Tool Material and Its Microstructural Characterization

Erosion Wear and Design Model of Functionally Gradient Ceramic AJM Nozzle

Vibration Analysis of ID Slicing Process and Wafer Measurement
Preparation of Nanocrystalline Diamond Films on Molybdenum Substrate by Double Bias Method

Study on Networked Technical Service System Oriented Production Process

Effects of Dynamic Characteristics of High-Speed Machine Tool/Cutting Tool System on Machining Quality

The Abrasion Mechanism of Diamond Coated Blades with Ultraviolet-Cured Resins

On Manufacturing of Long Stainless Steel Fiber with Fin by Multi-Tooth Tool and Mechanical Properties of the Fiber

A New Magnetic Polishing Liquid (MPL) for Precision Surface Finishing
Influence of Tooling Parameters in High-Speed Milling of Hardened Steels

Deducing the Coefficient of Non-Free Cutting of Major Cutting Edges of a Standard Twist Drill

Microstructure and Property of Nickel Electroformed Using Rotating Cathode in Hard Particles

Quality Testing for Pressed Raised Character on Metal Label Using GRBF Networks

Development of High-Speed Cutting Database System with Hybrid Intelligent Reasoning

Study on Dry Electrical Discharge Assisted Profile Truing and Dressing of Diamond Wheel

Effect of Sintering Temperature on the Mechanical Properties of Rare Earth Oxides Toughened Cermet Tool Materials

Nanometer Positioning System Based on Ball Screw
Study on the Adhering Disrepair and Groove Optimization of Cutting Tools for Difficult-to-Machine Materials
Study and Application on CVD Diamond Tools
Research on Influence of Crystal KDP Anisotropy on Critical Condition of Brittle-Ductile Transition in Ultra-Precision Cutting

Research on Electrochemical Micromachining System and Related Techniques

FEM Simulations on the Milling Dynamics of the Thin-Walled Structure Components

Effects of Methane Concentration on Growth of Carbon Balls in Anode Nozzle and Arc Stability of DCPJ CVD Plasma Torch
Study on the Two-Axle Bending with Elastic Roller Forming Technique of Non-Circular Cross-Section Tubular Parts Based on the Feed Force Control

Machining Simulation and Experimental Research of Complex Surface Parts Based on the PMAC

Carbon Nanotube as Probe for Atomic Force Microscope
AFM for Preparing Si Masters in Soft Lithography
Effects of the Substrate on the Determination of SEBS Thin Film Mechanical Properties by Nanoindentation

Grains Ultra-Refinement of Materials Imposed by Pulse Laser
A Suspending Abrasives and Porous Pad Model for the Analysis of Lubrication in Chemical Mechanical Polishing
Research on Periodic Structures Aroused by Femtosecond Laser Irradiation on Single-Crystalline Silicon Wafer

Investigation on Adhesion Work and Its Effects on Micro Friction
Precision Gravity Center Position Measurement System for Heavy Vehicles

Study on Nanometric Machining Process of Monocrystalline Si
Measurement of Roundness and Sphericity of the Micro Sphere Based on Atomic Force Microscope
Three-Dimensional Micromachining Based on AFM
A Study of Precision Sub-Dry Cutting Mechanism
A Research of Image-Based Visual Control in Microassembly under a Microscope

Study on the Compound Fuzzy Motion Control for the Ultra Precision Machine Tools

Fast Positioning Technology of High Acceleration Stage
Study on Cutting Coloring Stainless Steel by Abrasive Waterjet
Fabrication of Nanoscale Gratings by Nanoimprint on Silicon Wafer
Modelling of Fused Biconical Taper Process for Fibre Coupler
Kinematics and Simulation for a High-Precision Parallel Kinematic Platform
Analysis of the Static Performance of Externally Pressurized Gas Journal-Thrust Bearing with Slot Restrictors

Inertial Fusion Micro-Target Semiautomatic Assembly
Study on Comparative Experiments of Performance of Conventional and Nanocrystalline Diamond Film

Mechanochemical Polishing of Single Crystal Diamond with Mixture of Oxidizing Agents

A Model for Milling Force Prediction in High-Speed End Milling of P20 Mold Steel

Static Performance Analysis of Orifice Compensated Externally Pressurized Gas Spherical Bearing Based on FEM

Evaluation of the Development Level of China' s Precise Finishing Industry
Analysis and Application of Acoustic Emission Signals in Accurate Grinding Machining

Design and Control of Planar Parallel Mechanisms with High Speed and High Precision