Design of High-Performance CMOS Voltage-Controlled Oscillators

2003
ISBN: 978-1-4020-7238-3
Verlag: Springer US

Buch, Englisch, Band 708, 158 Seiten, Format (B × H): 160 mm x 241 mm, Gewicht: 453 g

Reihe: The Springer International Series in Engineering and Computer Science

Design of High-Performance CMOS Voltage-Controlled Oscillators presents a phase noise modeling framework for CMOS ring oscillators. The analysis considers both linear and nonlinear operation. It indicates that fast rail-to-rail switching has to be achieved to minimize phase noise. Additionally, in conventional design the flicker noise in the bias circuit can potentially dominate the phase noise at low offset frequencies. Therefore, for narrow bandwidth PLLs, noise up conversion for the bias circuits should be minimized. We define the effective Q factor (Qeff) for ring oscillators and predict its increase for CMOS processes with smaller feature sizes. Our phase noise analysis is validated via simulation and measurement results.
The digital switching noise coupled through the power supply and substrate is usually the dominant source of clock jitter. Improving the supply and substrate noise immunity of a PLL is a challenging job in hostile environments such as a microprocessor chip where millions of digital gates are present.

Zielgruppe

Research

Autoren/Hrsg.

Harjani, Ramesh

Fachgebiete

• Technische Wissenschaften Elektronik | Nachrichtentechnik Nachrichten- und Kommunikationstechnik Funktechnik
• Technische Wissenschaften Elektronik | Nachrichtentechnik Elektronik Bauelemente, Schaltkreise
• Technische Wissenschaften Elektronik | Nachrichtentechnik Elektronik Mikroprozessoren

Inhaltsverzeichnis

1. Introduction.- 2. Introduction to PLLS.- 1 Introduction.- 2 PLL Basics.- 3 A Linear Model for PLLs.- 4 Conclusions.- 3. Phase Noise and Timing Jitter.- 1 Phase Noise.- 2 Timing Jitter.- 3 Phase Noise vs. Timing Jitter.- 4 Conclusions.- 4. Review of Existing VCO Phase Noise Models.- 1 Challenges in Oscillator Phase Noise Analysis.- 2 Leeson’s Model.- 3 Razavi’s Model.- 4 Hajimiri’s Model.- 5. Universal Model for Ring Oscillator Phase Noise.- 1 Comparison and Analysis of Ring Oscillator Phase Noise.- 2 Modified Linear Model.- 3 Q-factor for Ring Oscillators.- 4 Noise Up-Conversion.- 5 Power Supply / Substrate Noise.- 6 Conclusions.- 6. New Ring VCO Design.- 1 Introduction.- 2 Phase Noise Overview.- 3 Circuit Design.- 4 Analysis of Circuits with Hysteresis.- 5 Simulation and Measurement.- 6 Conclusions.- 7. PLL Design Examples.- 1 PLL with Ring VCO.- 2 LC VCO.- 3 Simulation Results.- 4 Measurement Results.- 5 Conclusions.- 8. Conclusions.- 1 Research Contributions.- 2 Summary.