Energy and Exergy for Sustainable and Clean Environment, Volume 1

1. Auflage 2022
ISBN: 978-981-1682-80-3
Verlag: Springer Nature Singapore

Buch, Englisch, 646 Seiten, Paperback, Format (B × H): 155 mm x 235 mm, Gewicht: 978 g

Reihe: Green Energy and Technology

This multi-disciplinary book presents the most recent advances in exergy, energy, and environmental issues. Volume 1 focuses on fundamentals in the field and covers current problems, future needs, and prospects in the area of energy and environment from researchers worldwide. Based on some selected lectures from the Eleventh International Exergy, Energy and Environmental Symposium (IEEES-11) and complemented by further invited contributions, this comprehensive set of contributions promote the exchange of new ideas and techniques in energy conversion and conservation in order to exchange best practices in "energetic efficiency." Included are fundamental and historical coverage of the green transportation and sustainable mobility sectors, especially regarding the development of sustainable technologies for thermal comforts and green transportation vehicles. Furthermore, contributions on renewable and sustainable energy sources, strategies for energy production, and the carbon-free society constitute an important part of this book.

Zielgruppe

Professional/practitioner

Autoren/Hrsg.

Aloui, Fethi

Edwin Geo, V.

Fachgebiete

• Wirtschaftswissenschaften Wirtschaftssektoren & Branchen Energie- & Versorgungswirtschaft
• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Strömungslehre
• Sozialwissenschaften Soziologie | Soziale Arbeit Soziologie Allgemein
• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Technische Thermodynamik
• Sozialwissenschaften Politikwissenschaft Regierungspolitik Umwelt- und Gesundheitspolitik
• Geowissenschaften Umweltwissenschaften Umweltpolitik, Umweltprotokoll

Inhaltsverzeichnis

Power Management in the grid integrated solar photovoltaic system.- CFD analysis of parabolic solar collector with spiral and straight absorber tube.- MLP-BP based optimal Ranking of solar power plant site.- Numerical Investigation on influence of mounting baffles in double sloped partitioned solar still.- Exergy analysis of a square rib roughened triangular duct solar air heater.- Numerical investigation of flow and performance parameters of divergent chimney solar updraft tower.- Energy Analysis of the Solar Water heater with Secondary Reflectors.- Design and simulation of a grid-integrated solar system PI based on MPPT controller using SCA optimized.- Design and Thermodynamic Analysis of a Concentrated Solar Thermal Based Multigeneration System for a Laundry Facility.- An experimental based comparative analysis of Undi bio diesel blends with diesel in a DI engine operating with AHP method.- Application of Metamodeling in Parametric Optimization for Emission Reduction of Four Stroke DI Diesel Engine with Refined Vegetable Oil as Fuel.- Prediction and optimization of CI engine performance fuelled with Biodiesel-diesel blend using Response Surface Methodology.- Performance and Emission Characteristics of CI Engine Fueled with Cottonseed Oil Blended Diesel by Additives of Kerosene.- Characterization of non-edible punnai oil biodiesel derived by two-stage transesterification.- Are Lenses and Diffuser Important To Use In Low Wattage LED Luminaire ?.- Sizing and assessment of different architectures of micro integrated hybrid power system - a case study.- Impact of Energy systems accumulation on power system stability and stabilization methods.- Fuzzy-TOPSIS based optimization of a stand-alone hybrid energy system for faculty quarters of NIT Silchar.- Next Generation Quantum Dots Based Multijunction Photovoltaics.- Numerical Study on Thermal Performance of Radial Heat Sinks for LED Lamps.- Optimization and sensitivity analysis of stand-alone hybrid energy system forbuilding of an educational institute.- Power System Dynamic State Estimation with Non Linear Filter Techniques.- Energy Meter With Real Time Electricity Bill Prediction.- Energy modeling of EEG signal using Autoregressive - Empirical Mode Decomposition Method.- Improved Exergy in Three Phase Induction Motor by Eliminating Harmonics using Wavelet Packet Transform.- Electricity production in bioelectrochemical devices: impact of separator materiaLs.- Planning and Design of an Optimal Hybrid Renewable Energy System for Porompat Area of Manipur in North East India.- Synthesis of Praseodymium Doped Ceria based electrolyte material by Hydrothermal Method.- Reducing Eco-anxiety among Environmentally Concerned Ethiopian Peoples: using a Renewable Energy as a Coping Mechanism.- Thermodynamic assessment of ginger (Zingiber officinale) drying in fluidized bed dryer.- Comparative analysis of MRAC & IMC adaptive control modes for an industrial dryer.- Experimentally investigating the combined effect of paraffin and liquid cooling for battery thermal management system.- Kinetics Study of Convective Drying of Culantro (eryngium foetidum) under Continuous, Intermittent and Partial Vacuum Conditions.- Investigation of blockage effect on pressure drop and forced convective heat transfer from a heated circular cylinder.- Sloshing Behavior of Different Fluids in a Cylindrical Tank.- Design, Topology optimization and Fabrication of a Semi-trailing arm for an off-road vehicle using Optistruct.- Dynamics of a Cavitation Cloud Generated by Pulsed Focused Ultrasound: Study of the Re-Initialization of the Cloud at a New Pulse.- Kinetic Study Of Waste Tires Pyrolysis By Thermogravimetric Analysis Kissinger-Akahira-Sunose (KAS) Method.- Impact of Heat Integration from CO2 Compression on Energy Requirement and Equipment Costs in Power Plants Using Post Combustion Capture.- Lattice Boltzmann Equation for Axisymmetric Swirling Thermal Flows between Two Concentric Cylinders.-Analyzing and Modelling of Carbon Footprint and Life Cycle Assessment for a Climatic Wind Tunnel.

Über Autor(innen)

Dr. Edwin Geo Varuvel is Professor at SRM Institute of Science and Technology, with interests in the areas of waste to biofuels, biogas and hydrogen, energy recovery, engine emission control, alternate fuels, fuel cells, and electric vehicles.

Dr. Aloui Fethi is Professor at the INSA Hauts-de-France, LAMIH UMR CNRS 8201, Université Polytechnique Hauts-de-France, with interests in fluid mechanics, energetics and transport phenomena among others.