Carpenter / Bai / Zhang Characterization of Minerals, Metals, and Materials 2015

1. Auflage 2016
ISBN: 978-3-319-48191-3
Verlag: Springer International Publishing
Format: PDF
Kopierschutz: 1 - PDF Watermark

E-Book, Englisch, 773 Seiten, eBook

Reihe: The Minerals, Metals & Materials Series

This collection focuses on the characterization of minerals, metals, and materials as well as the application of characterization results on the processing of these materials. Papers cover topics such as clays, ceramics, composites, ferrous metals, non-ferrous metals, minerals, electronic materials, magnetic materials, environmental materials, advanced materials, and soft materials. In addition, papers covering materials extraction, materials processing, corrosion, welding, solidification, and method development are included. This book provides a current snapshot of characterization in materials science and its role in validating, informing, and driving current theories in the field of materials science. This volume will serve the dual purpose of furnishing a broad introduction of the field to novices while simultaneously serving to keep subject matter experts up-to-date.

Zielgruppe

Professional/practitioner

Autoren/Hrsg.

Carpenter, John

Bai, Chengguang

Zhang, Mingming

Pablo Escobedo-Diaz, J.

Hwang, Jiann-Yang

Ikhmayies, Shadia

Li, Bowen

Li, Jian

Neves Monteiro, Sergio

Peng, Zhiwei

Inhaltsverzeichnis

1;Cover;1
2;Half Title;2
3;Title Page;4
4;Copyright Page;5
5;Table of Contents;6
6;Preface;16
7;About the Editors;18
8;Session Chairs;25
9;Characterization of Ferrous Metals;26
9.1;Study of Age Hardening Behavior in a 350 Grade Maraging Steel;27
10;Characterization of Welding and Solidification;35
10.1;Laser Welding between TWIP Steels and Automotive High-Strength Steels;36
10.2;Undercooling of Rapidly Solidified Droplets and Spray Formed Strips of Al-Cu (Sc);44
10.3;Selective Laser Melting: Characteristics of IN718 Powder and Microstructures of Fabricated IN718 Sample;52
11;Method Development in Characterization;61
11.1;Advanced FIB Applications in Materials Research at CanmetMATERIALS;62
11.2;Cyclic Hardness Test PHYBALCHT: A New Short-Time Procedure to Estimate Fatigue Properties of Metallic Materials;69
11.3;Innovative Procedure for the Characterisation of Thermo-Mechanical Properties of Carbon Base Materials Using the Gleeble® 3800 System;77
11.4;Solid Solution Characterization in Metal by Original Tomographic Scanning Microwave Microscopy Technique;85
12;Characterization of Material Processing and Corrosion;93
12.1;Comparsion of the Mechanisms of Void Formation by Plastic Deformation in Single- and Dual-Phase BCC-Steels;94
12.2;Characterization of Sintering Dust, Blast Furnace Dust and Carbon Steel Electric Arc Furnace Dust;101
12.3;Influence of Mineralogical Characteristics of Iron Ore on Formation and Flow of Liquid Phase;109
12.4;Effect of Pressure on the Corrosion of Materials in High Temperature Water;117
12.5;The Effect of Strain Reversal during High Pressure Torsion on the Microstructure Evolution and Texture of Aluminum Alloys;125
13;Characterization of Composites;133
13.1;Bending Mechanical Behavior of Polyester Matrix Reinforced with Fique Fiber;134
13.2;Weibull Analysis of the Behavior on Tensile Strength of Hemp Fibers for Different Intervals of Fiber Diameters;139
13.3;Preparation and Characterization of Natural Rubber/Organophilic Clay Nanocomposites;147
13.4;Tensile Properties of Epoxy Composites Reinforced with Continuous PALF Fibers;155
13.5;Replacement of Carbon Black on Natural Rubber Composites and Nanocomposites – Part 1;161
13.6;Flexural Mechanical Characterization of Epoxy Composites Reinforced with Continuous Banana Fibers;169
13.7;Influence of the Nanoclay Cloisite 20A Incorporation on Properties of Acrylonitrile Butadiene Styrene (ABS);175
14;Characterization of Non-Ferrous Metals;180
14.1;Characterization of Closed-Cell Aluminium Foams Subjected to Compressive Loading;181
15;Characterization of Materials Extraction;189
15.1;Improvement on Performance of Mg-C Refractories as Lining of Vanadium-Extraction Converters;190
15.2;Analysis on Deep Treatment Effect of Coking Wastewater Using 3D Electrode Combined with Fenton Reagent;198
15.3;Characterization of Steelmaking Desulfurization Slag;206
15.4;Development and Characterization of Nanomaterials for Zinc Vapor Capture;214
15.5;Separation of Roasted Coating and Core in Double-Layered Pellet Roasting for Pretreatment of Sulfur and Arsenic-Bearing Gold Concentrate;222
15.6;Prediction for the Surface Tension of FeO-TiO2-Ti2O3-X(SiO2, CaO, MgO) Slag Systems;230
16;Characterization of Soft Materials;238
16.1;Constitutive Modeling of a Glass Fiber-Reinforced PTFE Gasketed-Joint Under a Re-Torque;239
16.2;Microwave Absorption Characteristics of Tire;247
16.3;Optical Evaluation for Biomimetic Microlens Array on PDMS Sheet;256
16.4;Behavior of Linear Low Density Polyethylene Films Under UV Ageing for Agricultural Application;263
16.5;Photoacoustic Thermal Characterization of Malva Fibers;269
16.6;Mechanical, Morphological and Thermal Properties of Açaí Fibers Reinforced Biodegradable Polymer Composites;275
16.7;Influence of Clay Exfoliation on the Properties of EVOH/Clay Flexible Films;283
17;Characterization of Minerals;290
17.1;Chemical Resistance of Ornamental Compound Stone Produced with Marble Waste and Unsaturated Polyester;291
17.2;Characterization of Feldspar by Instrumental Analytical Techniques;298
17.3;Microwave Power Absorption Characteristics of Iron Oxides;305
17.4;Qualitative and Mineralogical Characterization of Lead Deposit in Ishiagu, Ebonyi State, Nigeria;312
17.5;Sintering Characteristics of Iron Ores with Addition of Laterite Nickel Ores;322
18;Characterization of Clays and Ceramics;330
18.1;Alumina Superfines Based Geopolymeres: Developments and Characterization;331
18.2;Densification and Mechanical Properties of Reaction Sintered Al2O3-MgO-CaO Refractory;340
18.3;Influence of Sintering Temperature on Microstructure and Properties of Magnesia Partially Stabilized Zirconia Ceramics;347
18.4;Evaluation of Structural Clay Brick Masonry Units by Weibull Analysis and Brazilian Code and Specifications;354
18.5;Brazilian Bentonite Submitted to Mild Acid Treatment Under Moderated Conditions;362
18.6;Increase of Flexural Strength of Red Ceramic Pieces Incorporated with Ornamental Rock Waste: Application of Weibull Statistic for Determination of Best Firing Temperature;370
19;Characterization of Electronic, Magnetic, Environmental, and Advanced Materials;378
19.1;Shape Memory Characteristics of Rapidly Solidified Ti-37.8Cu-18.7Ni Alloy Ribbons;379
19.2;Effects of Casting Conditions on the Structure and Magnetic Properties of the Co-19 at.%Al-6 at. %W Alloy;384
19.3;Characterization of the Phase Composition of Nanosized Lithium Titanates Synthesized by Inductive Thermal Plasma;391
19.4;Improved Hydrogen Storage Properties of Mg(BH4)2-Mg(AIH4)2 Combined Systems;399
19.5;Optical Parameters of CdS1-yTey Thin Films;407
20;Poster Session;415
20.1;The Effects of High Al2O3 on the Metallurgical Properties of Sinter;416
20.2;Characterization of Formulations with Ornamental Rock Waste and Clays to Produce Ceramic Paver;423
20.3;Evaluation of Thermoelectric Methods for the Detection of Fretting Damage in 7075-T6 and Ti-6Al-4V Alloys;431
20.4;Optimization Research of Peritectic Steel Mold Flux with CO2O3 Doping;439
20.5;Effect of Potential on Characteristics of Oxide Product Layers on Chalcopyrite;445
20.6;Pullout Tests Behavior of Epoxy Matrix Reinforced with Malva Fibers;453
20.7;Tensile Strength of Polyester Composites Reinforced with Fique Fibers;460
20.8;Characterization of Polyester Matrix Reinforced with Banana Fibers Thermal Properties by Photoacoustic Technique;466
20.9;Hot-Pressing and Mechanical Properties of BN Based Composites;474
20.10;Experimental Study of Advanced Treatment of Coking Wastewater Using PFS Coagulation-Photocatalytic Oxidation Technology;481
20.11;Phase Transformation and Element Migration in the Oxidation Process of Nickel-Copper Sulfide Ore;489
20.12;Sintering and Performance of High Alumina Refractory with ZrO2 Addition;497
20.13;Iron Recovery from Copper Slag Through Oxidation-Reduction Magnetic Concentration at Intermediate Temperature;502
20.14;Characterization and Evaluation of Incorporation the Casting Sand in Mortar;510
20.15;Carbonization of Coals Mixed Iron Ore Fines and Gasification of Resulting Iron Coke with Co2: Transformation of Iron Minerals and Coke Properties;515
20.16;Experimental Investigation on High Temperature Roasting of Basic Oxygen Furnace Slag;524
20.17;Experimental Study on Semi-Dry Flue Gas Desulfurization Ash Used in Steel Slag Composite Material;531
20.18;Effect of Manganese on the Formation Mechanisms of Silico-Ferrite of Calcium and Aluminum (SFCA);538
20.19;Izod Impact Test in Epoxi Matrix Composites Reinforced with Hemp Fiber;545
20.20;Zinc Recovery from Zinc Oxide Flue Dust during the Neutral Leaching Process by Ultrasound;551
20.21;Microhardness and Deformation Storage Energy Density of NiTi Thin Films;559
20.22;Morphology and Distribution of Nb-Rich Phase and Graphite in Nb Microalloyed Ductile Iron;567
20.23;Cause Analysis on Buildup Formation of Carbon Sleeve in Continuous Annealing Furnace for Non-Oriented Silicon Steel Produced by CSP Process;574
20.24;Analysis of the Feasibility of Using Soil from the Municipality of Goytacazes/RJ for Production of Soil-Cement Brick;581
20.25;Effects of Niobium Microalloying on the Pearlite of Ductile Iron;587
20.26;Evaluation of Palf Fibers Elasticity Modulus with Different Diameters by Weibull Analysis;593
20.27;Research on Reasonable Particle Size of Coal Blends for Blast Furnace Injection: Semi Coke and Bituminous Coal;599
20.28;Recovery of Copper from Slow Cooled Ausmelt Furnace Slag by Floatation;606
20.29;Characterization of Mechanical Properties of PP/HMSPP Blends with Natural and Synthetic Polymers Subjected to Gamma-Irradiation;614
20.30;Effect of Mercerization and Electron-Beam Irradiation on Mechanical Properties of High Density Polyethylene (HDPE) / Brazil Nut Pod Fiber (BNPF)Biocomposites;622
20.31;Analysis of Porosity and Flexural Strength Changes of Red Ceramic Pieces Incorporated with Ornamental Rock Waste;630
20.32;Effects of Accelerated Thermal Aging on Polypropylene Modified by Irradiation Process;636
20.33;Mechanical Properties of Polypropylene Nanocomposites with Organoclay and Discarded Bond Paper;644
20.34;Recovery of Mercury and Lead from Wastewater by Sulfide Precipitation-Flotation;652
20.35;Clinker Production from Waste: From Cellulose Industry and Processing Marble and Granite Industry;660
20.36;Study of Wettability of Clayey Ceramic and Fluorescent Lamp Glass Waste Powders;666
20.37;Biodegradable Starch/Copolyesters Film Reinforced with Silica Nanoparticles: Preparation and Characterization;672
20.38;Cyanidation Study of Slag Rich in Silver;679
20.39;Thermophysical Properties of Modified Ti-Bearing Blast Furnace Slags;687
20.40;PHYBALSIT Fatigue Assessment and Life Time Calculation of the Ductile Cast Iron EN-GJS-600 at Ambient and Elevated Temperatures;694
20.41;Gold Leaching Characteristics and Intensification of a High S and As-Bearing Gold Concentrate;702
20.42;Electrochemical Properties of Al-Cu Alloys in NaCl Solutions;710
20.43;Evaluation of Acid Treatment on Brown Bentonite;718
20.44;Numerical Simulation of the Copper Steel Composite Stave Heat Transfer in the Belly and Lower Shaft Region of the Blast Furnace;726
20.45;Effect of Applied Pressure on the Tribological Behaviour of Dual Particle Size Rutile Reinforced LM13 Alloy Composite;737
20.46;Investigation on Mechanical and Thermal Behaviours of Copolyester/PLA Blend Reinforced with TiO2 Nanoparticle;745
20.47;Influence of Cu²+ and Zn²+ on the Dissolution of Ag in S2O3²- Medium;751
20.48;Photocatalytic H2 Production under Visible Light Irradiation on Novel Heterostructure NiS/ZnS Nanosheet Photocatalyst;758
21;Author Index;766
22;Subject Index;770

Über Autor(innen)

The Minerals, Metals & Materials Society (TMS) is a member-driven international professional society dedicated to fostering the exchange of learning and ideas across the entire range of materials science and engineering, from minerals processing and primary metals production, to basic research and the advanced applications of materials. Included among its nearly 13,000 professional and student members are metallurgical and materials engineers, scientists, researchers, educators, and administrators from more than 70 countries on six continents. For more information on TMS, visit www.tms.org.