Etter | Microbolometer based on a Porous Silicon Fabrication Process with a Plasmonic Absorber | Buch | 978-3-8440-3020-4 | sack.de

Buch, Englisch, 155 Seiten, GB, Format (B × H): 148 mm x 210 mm, Gewicht: 233 g

Reihe: Berichte aus der Mikrosystemtechnik

Etter

Microbolometer based on a Porous Silicon Fabrication Process with a Plasmonic Absorber


1. Auflage 2014
ISBN: 978-3-8440-3020-4
Verlag: Shaker

Buch, Englisch, 155 Seiten, GB, Format (B × H): 148 mm x 210 mm, Gewicht: 233 g

Reihe: Berichte aus der Mikrosystemtechnik

ISBN: 978-3-8440-3020-4
Verlag: Shaker


Low-cost microbolometers are the key to enabling a broader market penetration of uncooled thermal imaging sensors. Nowadays, such devices can be used for commercial applications, ranging from thermal building inspection to automotive night vision. The problem with the presently available microbolometer arrays is the use of exotic materials in the production, such as non-CMOS-compatible materials, e.g. vanadium oxide (VOx). The microbolometer presented in this dissertation follows a radically different approach. The concept involves the fabrication of a completely separate micro-electro-mechanical-system (MEMS) microbolometer chip and a separate read-out-circuit (ROIC) chip. These are combined using wafer-level bonding. In this design the infrared (IR) radiation is exposed from behind (through the substrate) onto the pixels. Fabricating the MEMS chip involves designing and fabricating thermally insulated microbolometer pixels. The temperature-sensitive-devices (TSDs) that detect the heat induced by the IR radiation are PN-junction diodes. Another essential part in this underlying work is the fabrication design of a plasmonic absorber for microbolometer pixels. Comparing the pixels with and without a plasmonic absorber shows that pixels with a plasmonic absorber, absorb LWIR 18 percent better compared to pixels without an absorber, further underlining the fact that the peak absorption approximately coincides the designed wavelength.

Etter Microbolometer based on a Porous Silicon Fabrication Process with a Plasmonic Absorber jetzt bestellen!

Autoren/Hrsg.




Ihre Fragen, Wünsche oder Anmerkungen
Vorname*
Nachname*
Ihre E-Mail-Adresse*
Kundennr.
Ihre Nachricht*
Lediglich mit * gekennzeichnete Felder sind Pflichtfelder.
Wenn Sie die im Kontaktformular eingegebenen Daten durch Klick auf den nachfolgenden Button übersenden, erklären Sie sich damit einverstanden, dass wir Ihr Angaben für die Beantwortung Ihrer Anfrage verwenden. Selbstverständlich werden Ihre Daten vertraulich behandelt und nicht an Dritte weitergegeben. Sie können der Verwendung Ihrer Daten jederzeit widersprechen. Das Datenhandling bei Sack Fachmedien erklären wir Ihnen in unserer Datenschutzerklärung.