Eco-Materials Processing and Design IX

Selected, peer reviewed papers from 9th International Symposium on Eco-Materials Processing and Design, Changwon Convention Centre, Changwon City, Korea, January 07-09, 2008
Erscheinungsjahr 2008
ISBN: 978-0-87849-472-9
Verlag: Trans Tech Publications

Buch, Englisch, 384 Seiten, Format (B × H): 170 mm x 240 mm, Gewicht: 900 g

This up-to-date collection, “Eco-Materials Processing and Design IX”, covers – on a global scale – the outstanding advances made in investigating, producing and using eco-materials. It furnishes materials scientists and end-users with a valuable source of information and new concepts covering the complete spectrum of ecology, eco-materials, nano-materials, bio-materials, recycling, environmental protection and energy conversion related materials.

Autoren/Hrsg.

Jun, Byungsei

Kim, Hyung Sun

Lee, Chan Won

Lee, Soo Wohn

Fachgebiete

• Geowissenschaften Umweltwissenschaften Umwelttechnik
• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde Materialwissenschaft: Verbundwerkstoffe
• Technische Wissenschaften Technik Allgemein Nanotechnologie
• Naturwissenschaften Physik Quantenphysik
• Technische Wissenschaften Verfahrenstechnik | Chemieingenieurwesen | Biotechnologie Chemische Reaktionstechnik (incl. Katalyse, Elektrolyse)
• Technische Wissenschaften Umwelttechnik | Umwelttechnologie Umwelttechnik

Inhaltsverzeichnis

Committees
Preface
A. Photocatalyst
Nano-Sized Nitrogen-Doped Ti-W Mixed Oxides: Preparation and Enhanced Photocatalytic Activities under Visible Light Irradiation
Treatment Performance of Photocatalysis/H2O2/Metal Membrane Process for Organics Removal
Test Method for Skin Damage of Titania Photocatalyst Nanoparticles In Vitro
Surface Roughness Control of Zirconia Films Using a Novel Photoresponsive Precursor Molecule for Improving its Photocatalytic Activity

Influence of Calcination Temperature on the Microstructure of Porous TiO2 Film

Nanocrystalline TiO2 Coated-Fabric for UV Shielding and Anti-Bacterial Functions
Preparation of Ultrafine TiO2 Nanofibers and their Application in Removal of NOx in Air
Performance of Photocatalysis/Chemical Oxidants in Aqueous TiO2 Suspensions
Removal of Refractory Organic Compounds Using Peroxy Radical and Ozone Reaction in Aqueous Solution
Physicochemical Characteristics of ZnS Immobilized on Spherical Activated Carbon for Removing HA(Humic Acid)
Characterization of Anodized TiO2 for Hydrogen Evolution in Enzymatic PEC System

B. Nano Structured Materials

Machinability and Microstructure of SiC/h-BN Nano-Composites

Investigation on Gel Casting Preparation of Porous Si3N4 Ceramics through Orthogonal Experimental Design
Investigation of Mechanical Property and Thermal Shock Behavior of Machinable B4C/BN Ceramics Composites
High Temperature Oxidation of WC-CrN Superhard Nanocomposite Film

Synthesis of MgO Thin Film Deposited on Soda Lime Glass by Sol-Gel Process
Study on the Recognition of the Registration Marks for Low-Energy Microcolumn Lithography

Properties of Nano-Hybrid Sol-Gel Coating Films Synthesized with Colloidal Silica and Organoalkoxy Silanes
Structural and Electrical Properties of Vanadium Tungsten Oxide Thin Films Grown on Pt/TiO2/SiO2/Si Substrates

Synthesis of Nickel Coated Gadolinia Doped Ceria Nanopowder by Microwave Radiation

Analysis of Cell Toxic Experiments in New Synthetic Compounds from Nano-Scaled Collagen
Corrosion Resistance of TiAlN/ZrN and TiCrN/ZrN Multilayers during Heat Treatment

Mechanical Performances of ZTM/SiC Nanocomposite Optimized through Composition and Microstructure Tailoring

C. Hybrid Materials
Phase Analysis in the Region Brazed with Ni-14Cr-10Co-3.5Al-2.5Ta-2.8B Filler Metal Using Electron Backscatter Diffraction
The Mechanical Properties of AlN/BN Laminated Ceramic Composites

Comparative Studies on Microstructure and Mechanical Properties of CrN, Cr-Mo-N and Cr-Si-N Coatings

Syntheses and Mechanical Properties of Ti-Al-Si-C-N Coatings by a Hybrid Coating System

Pressureless Brazing of Zirconia to Stainless Steel Using Active Filler Metal with TiH2 Powder

Investigation of Cu/Al Metal Laminates Prepared by Plasma Activated Sintering (PAS)

Two-Step Planarization of ECMP and CMP for MEMS Copper Patterns
Optimum Material Design of Metal-Ceramic Hybrid Functionally Graded Composite
Vacuum Breakdown Behavior of CuWCr Composites

Experimental Analysis in Lithium Niobate CMP for Room Temperature Bonding

The Effect of Mixed Abrasive Slurry on CMP of 6H-SiC Substrate
The Effects of Various Substrate Temperature of Bi2O3 Buffer Layer on SBT (SrBi2Ta2O9) Thin Films Deposited by R.F. Magnetron Sputtering
Oxidation Behavior and Cutting Performance between Ti0.75-Al0.25-N and Ti0.69-Al0.23-Si0.08-N Coated Tool through Measurement of Cutting Temperature
Stress-Induced Martensitic Transformation of Metastable Ti-Nb-Ge Alloys for Biomedical Application
Dry Sliding Wear Characteristics of Ti-Nb-Si Alloys for Biomedical Application
Crystallization Kinetics for Synthesis Hyper-Structure in P2O5-ZnO-B2O3-BaO-Al2O3-TiO2 Glass Ceramic Composite

Optical Property of Hybrid Material Including Crystalline in Amorphous Matrix
The Preparation and Characterization of Organic Solvent Dispersible Polyaniline Coated Titania Hybrid Nanocomposites

The Adhesion Evaluation of Thin Hard Coatings on Tool Steel with Nitride or Non-Nitride Layer Using the Scratch Test

The Electrical Properties of PLZT Thin Films on ITO Coated Glass with Various Post-Annealing Temperature

Mechanical Properties and Microstructure Observation with Grain Refinement in CuZnAl Alloy

Formation of TiO2 Coating Layer on the Surface Treated Ti Alloys

Deposition of ISZO Films on Polymer Substrate Using Two Cathodes
Mechanical and Electrical Properties of Ga-Doped ZnO Films Deposited on Flexible Substrate by DC Magnetron Sputtering

A Study on the SiC/Al Composites Fabricated by Pressureless Infiltration
The Resistivity-Temperature Property of Transition Metal Oxide Co3O4 with In2O3 Addition
The Effect of Alloying Cu on Pitting Corrosion Resistance of Copper-Bearing Ferritic Stainless Steel

D. Recycling/Substitute of Hazardous Materials
Removal of Carbon Nanoparticle Using NO2 Oxidation Technique
Effect of MSW Incineration Bottom Ash in Clay Based Ceramics
Manufacturing of Construction Materials from Municipal Incinerator Residue

Adsorption Behavior of Barley Straw Carbon for Chromium (VI) Ion
Gelatin-Glutaradehyde-Poly(Vinyl Alcohol) Bioadsorbent: Synthesis, Characterization and Application for Copper(II) Ion Removal from Synthetic Aqueous Solution
Photocatalytic Cr(VI) Reduction by Anodized TiO2
Fabrication of WC and WC(Co) Codeposited Nickel Composite Coating by Electroplating Method for the Replacement of Chromium Coating
E. Eco-Materials

Oil Removal Using Diethyl Ether Extracted and Ground Kenaf Core
Properties of Permeable Concrete Substrate Having Dual Pore Structures
Fabrication of Porous ß-Tricalcium Phosphate with Collagen Composite Materials
Absorption and Preservation of Bentonite Containing Smectite
Absorption of Bentonite Compact with Absorbent Polymer
Preparation and Characteristics of Eu and Dy Doped Sr4Al14O25 Phosphor
Optimization of Earth Resistance by Investigating the Surge-Wave Response

Numerical Simulation of Heat Evolution of Eco-Friendly Blended Portland Cements Using a Multi-Component Hydration Model
Numerical Simulation of Autogenous Shrinkage of Eco-Friendly Blended Portland Cements Using a Multi-Component Hydration Model
Using of Ethylene Glycol as Pore-Form Agent to Form Interconnected Mesopores in Carbonized Phenol Resin

Effect of Different Upper Side Types of Plaster Molds on the Pore Formation of Al Foams via Upward Foaming Method

Comparative Study on TiH2 and CaCO3 for Fabrication of Mg Alloy Foams

Anisotropic Mechanical Properties of Nickel Foams Fabricated by Powder Metallurgy
Concentration of Organic Acid from Fermented Food Wastes Using a MF/RO Process
Effect of Different Chemical and Physical Characteristic Having Lignocellulosic Fibers on Heavy Metal Ion Removal from Auqueous Solution

Fabrication of Porous Plate with Bimodal Pore Size Distribution Using Molten Slag from Incinerator

Development of A3003 Alloy Tube for Eco-Friendly Refrigerant Application
An Experimental Study of the Characteristics of Environment-Friendly Construction Materials by Recycling Sewage Sludge Ash

Charge and Discharge Properties of Hydrogen in the Alloy Hydride System with Open Cell Al Foam
Preparation and Characterization of High Compressive Strength Geopolymeric Monoliths Using Silica Waste

Development of Free Nitric acid, Non-P Desmut Solution for Surface Treatment Aluminium Alloys

Effect of Impurities on Formation of Pores in Porous Alumina during Unidirectional Solidification

Development of Inorganic Binder with MSWI Ash

Comparison of Porous Ceramic Materials with Low Thermal Expansion Coefficient Prepared with SiC and Black-Al2O3
Development of Porous Materials Using Sewage Sludge by Molten-Salt Method

Zeolite Synthesis Using Sewage Sludge by Molten-Salt Method
Effect of SPS on Surface Characteristics of Gas-Atomized Mg-6wt%Al-1wt%Zn Alloy by Non-Hazardous PEO Treatment

Dehumidification of Air by the Composite Membrane Coated with Hydrophilic Polymer on Inorganic Substrate
Mineralogical Characterization of Villa Reyes México Kaolin for Industrial Applications
Performance of a Two-Phase Carbon Dioxide-Filled Thermosyphon
Refractive Index of SiO2-B2O3-Al2O3 Glasses
Preparation and Characterization of KGM /TiO2 Composite Membrane
Preparation of the Nano-Hydroxyapatite/Chitosan/Konjac Glucomannan Composite as a Novel Degradable Drug Delivery System
Effects of Al Addition on Mechanical Properties of Plasma Spayed Al2O3-Al Composite Coatings