E-Book, Englisch, 2524 Seiten
Lee / Yoon Advances in Nondestructive Evaluation
Erscheinungsjahr 2004
ISBN: 978-3-0357-0634-5
Verlag: Trans Tech Publications
Format: PDF
Kopierschutz: 0 - No protection
E-Book, Englisch, 2524 Seiten
ISBN: 978-3-0357-0634-5
Verlag: Trans Tech Publications
Format: PDF
Kopierschutz: 0 - No protection
The aim of this 3-volume set is to bring together the expertise of scientists and engineers, in academia and industry, who are active in the field of non-destructive testing and evaluation.Volume is indexed by Thomson Reuters CPCI-S (WoS).The papers cover activities which include analytical techniques as well as experimental case studies.
Autoren/Hrsg.
Fachgebiete
Weitere Infos & Material
Preface
An Assessment of the Current State and Future Challenges in Quantitative NDE
Ultrasonic Characterization of Thin Film Material Constants and Defects
Ultrasonic Guided Waves in Structural Health Monitoring
Investigation of Magnetic Characteristics for a FeCo/Si Multilayer with the Variation of the Bias Potential at Substrate
3D Modeling of Porous Ceramics by High-Resolution X-Ray CT for Stress Analyses
Residual Stress Assessment in API X65 Pipeline Welds by Non-Destructive Instrumented Indentation
A Method for Quantitative Evaluation of Electrical Conductivity of Silicon Wafers by Millimeter-Waves
Bending Behavior of Thin-Walled Cylindrical Tube Filled with Aluminum Alloy Foam
Non-Destructive Sans Study of Al Nano Powder Compacts
Finite Element Analysis of Residual Stress in NiCrAlY/Yttria-Stabilized Zirconia Coatings by Nanoscale Multi-Layered Deposition
Effect of Overlap Length and Adhesive Thickness on Stress Distribution in Adhesive Bonded Single-Lap Joints
Metallurgical Failure Characterization of 2.25Cr-1Mo Steel by Magnetic Property Analysis
Non-Destructive Determination of Flow Properties through Analysis of Contact Characteristics beneath Indenter
Arrangement of Probes for Measuring Case Depth by Means of Four-Point Probes
Non-Destructive Characterization of Hydrogen Concentration in Zircalloy
Prediction of the Crack Opening Behaviour for the Fatigue Crack Propagating in Welding Residual Stress Field
Prediction of Material Properties of CF8M Cast Stainless Steel by Thermal Embrittlement Using Neural Network
Surface Deflection of a Two Layered Half-Space Containing a Surface Crack
Simplified Impact Analysis Based on Equivalent Static Analysis for Impact Design of TFT-LCD Panels
Ultrasonic Evaluation of Creep Damage of High Temperature Metallic Materials with Different Microstructures
X-Ray Stress and Diffraction Line Width Measurement by the Gaussian Curve and Parabola Methods
A Spherical Indentation Technique Based on FE Solutions for Material Property Evaluation
A Measurement Method of Residual Stress in Quenched Steel by Neutron Diffraction
Residual Stress in Compact Disk Generated during Molding Process
New Phased Array Ultrasound System Based on DSP/BOIS and PCI Bus
Ultrasonic Detection of the Metallurgical Defects in the Steel and its Evaluation by Neural Network Based on the Wavelet Transform Noise Suppression
High Frame Rate and High Resolution Imaging with Synthetic Aperture
Analysis of Beta-Ray Data Using the Wavelet Thresholding Method and Extended Kalman Filter
Generation of Three-Dimensional Images Using Ultrasonic Pulse-Echo Data for Fault Characterization
Non-Destructive Visualization of Two-Phase Fields by the Electrical Impedance Tomography with an Adaptive Mesh Grouping Scheme
3D X-Ray Laminography with CMOS Image Sensor Using a Projection Method for Reconstruction of Arbitrary Cross-Sectional Images
3-Dimensional Imaging Technique for Shape Estimation of Flaw in Ultrasonic Non-Destructive Evaluation
Multiple Transmit Focusing Using Modified Orthogonal Golay Codes for Ultrasound Nondestructive Testing
Signal Analysis for the Condition Monitoring of a Check Valve Using a Time-Frequency Representation
Multiplierless Sigma-Delta Modulation Beam Forming for Ultrasound Nondestructive Testing
A Systolic Multi-Layer and Multi-Line Stereo Vision System for 3D Visual Inspection
Transform Coding of Arbitrarily Shaped Regions in Ultrasonic Data
Line Defect Detection in TFT-LCD Using Directional Filter Bank and Adaptive Multilevel Thresholding
Time-Domain Noise Analysis of CMOS Readout Ic for CZT X-Ray Detectors
Development and Characterization of a Flat-Panel Detector-Based Microtomography System
Detection of Operational Abnormality of Ball Bearing with Ultrasonic Technique
Non-Destructive Evaluation Using Laser-Generated Ultrasonic Waves
A Study on the Characteristics of Surface Wave Induced by Phased Array Ut
Implementation of Ultrasonic Immersion Technique for Babbitt Metal Debonding in Turbine Bearing
Analysis of Residual Stress Effect in Wear-In Procedure Using Utrasonic Backward Radiation
Study of Characteristics of Sound Field in Mixing Phased Array
Simultaneous Determination of Ultrasonic Wave Velocities and Thickness of Solid Plates
Effects of Rubber Loading on Back-Reflected Leaky Lamb Waves
Model-Based Interpretation of Angle Beam Ultrasonic Testing Signals from Welded Joints
Simulation of Angle Beam Ultrasonic Testing with a Personal Computer
Ultrasonic Measurement of Gap Size in an Epoxy Layer between a Steel Sheet and Fiber Reinforced Plastics
Leaky Lamb Waves of a Piezoelectric Plate Immersed in a Conducting Fluid - Analysis and Measurement
Ultrasonic Identification of the Structural Changes due to the Impact Testing of a Charpy Specimen Used for the Reactor Pressure Vessel Materials Testing
Automatic Non-Contact Defect Inspection of Cylindrical Shell Using a Laser-Ultrasonic Technique
Evaluation of Thickness for NiCrAlY Coatings Sprayed on the Superalloy by Using Ultrasonic Spectral Analysis
Comparison among Ultrasonic Velocity, Attenuation and Power Spectra of Different Heat Treatment Transformation Products in 38CrMoAl Steel
Study on the Development of Multi-Path Ultrasonic Gas Flow Meter
Two-Wave Mixing Interferometer for Ultrasonic NDT in Defect Detection
Development of Phased Array and Tofd Simultaneous Inspection System for Coke Drum
Development of a Scanner and a Control System for an Automated Ultrasonic Testing of Pipe Elbows
Examination of Flaw Detection near the Surface by the Ultrasonic TOFD Method
Modeling of Transmitting and Receiving Ultrasonic Probes for Use with the Mass-Spring Lattice Model
Application of Ultrasonic Techniques for Evaluation of Thermal Fatigue Crack
Ultrasonic Monitoring Technique for Icing and Flow in a Duct
Fundamentals of Ultrasonic Measurement Models
Calculation for Guided Waves in Pipes and Rails
Experimental Studies on Guided Waves for the On-Line Inspection of Steam Generator Tubes
Analysis of the Circumferential Guided Wave for Axial Crack Detection in a Feeder Pipe
Application of Guided Waves for Detection of Scale Inside Water Supply Pipes
Rapid, Long Range Inspection of Chemical Plant Pipework Using Guided Waves
Ultrasonic Sensitivity Enhancement for Material Characterization Using Guided Wave Energy Loss Parameters
Investigation of Guided Wave Scattering in Curved Waveguides
Three-Dimensional Defect in a Plate Boundary Element Modeling for Guided Wave Scattering
Fracture Behaviors and Acoustic Emission Characteristics of Pipes with Local Wall Thinning
AE Features of PBX JOB-9003 Depending on Loading Rate
An Advanced Acoustic Emission Sensor for Transient Elastic Wave Measurements
Analysis of Acoustic Emission Behavior in Graphite Materials for Solid Rocket Motor
Non-Contact Measurement of Acoustic Emission in Thin Specimen by Laser Interferometer
The Use of Acoustic Emission Method to Evaluate Creep-Fatigue Interaction
Nondestructive Evaluation of Damage Behavior of Ceramic under Thermal Shock Cycle
Evaluation of Calendar Damage of Aircraft Structures Using Acoustic Emission
Monitoring Nugget Formation of Nickel-Alloys in Micro Spot Welding Using Acoustic Emission
Measurement Strategy of the Water Leakage into a Low Pressure Sodium Boundary for a Liquid Metal Reactor
Development of PC-Based Leak Detection System Using Acoustic Emission Technique
Analysis of Acoustic Emission Signals for Condition Monitoring of Check Valve at Nuclear Power Plants
Fatigue Crack Detection in Coldworked Aluminum Alloys Using Acoustic Emission Technique
Acoustic Emission for Structural Integrity of Concrete from Fresh to Damaged
Principal Component Analysis of Eddy Current Signals Obtained from Steam Generator Tubes by Bobbin Probe
Prediction of Bobbin Probe Eddy Current Signals for Tubular Components with the Conductivity and Permeability Variation
Numerical Analysis of ECT Signals for Bulge and Dent Type Defect on SG Tube
Signal Characteristics Observed in the Remote Field Eddy Current Testing Experiments
Evaluation Results on Enhanced ECT Implementation of Steam Generator Tubes after a Korean SGTR Event
Preparation of Eddy Current Impedance Plane Diagram by Finite Element Modeling
Time-Domain and Frequency-Domain Eddy Current Simulations by the Finite Element Method
Rapid Reconstruction of Natural Stress Corrosion Cracking from Eddy Current NDT Data
Development of an ECT Technique for Discriminating between a Through-Wall/Non Through-Wall Crack in a Steam Generator Tube
Applications of a Capacitive Probe to Detect Defects on Dielectric Materials
Long-Distance Inspection of Pipes Using Electromagnetic Acoustic Transducer for Cylindrical Wave
Flaw Detection of Railroad Wheel Tread Using EMAT
The Detection of Defects in Paramagnetic Materials Using Locally Focused Electromagnetic Field Technique
Numerical Consideration of Magnetic Camera for Quantitative Nondestructive Evaluation
Magnetic Flux Leakage Testing Theory and Method for Magnetizer End Inspection
The Method and Apparatus of Magnetic Nondestructive Testing for Boiler Waterwall Tube
Investigation on Metal Magnetic Memory Signal of Surface Crack on Welding Scar in LPG Tank
A Diagnostically Lossless Compression Method and FPGA Implementation for Pipeline Magnetic Flux Leakage Inspection Data
Nondestructive Evaluation of the Irradiated Mn-Mo-Ni Low Alloy Steel by Magnetic Methods
Development of a New Transformer Type Torque Sensor
Simultaneous Detection of Size and Depth of Embedded Reinforcement in Concrete by Arraying Sensing Coils in a Probe
Nondestructive Testing for Wire Rope
A Study on Evaluation of Strain Behavior near Crack Tip by Self-Generated Magnetic Field from Externally Applied Stress
Full-Field Measurement of Deformation of Recycled Paper Using Electronic Speckle Pattern Interferometry
Damage and Failure Monitoring of Fiber-Metal Laminates Using Optical Fiber Sensors
Quantitative Evaluation of Defect inside Tire by Shearography
Separation of DOAS Measurements Data by Independent Component Analysis
A Study of Overload Effects on Fatigue Crack Propagation under Cyclic Loading Using ESPI System
Dynamic ESPI (DESPI) for Non-Destructive Testing
Strain Measurement by Multiplexed Optical Loss Based Fiber Optic Sensor
Study on the Band Gap Energy of CdIn2Te4 Crystal Obtained from the Photocurrent Spectroscopy
Thermal Annealing Effects of the CdIn2Te4 Single Crystal Obtained from Photoluminescence Measurement
360-Deg Profilometry of 3-D Object by Multi-Reference-Planes Method
Application of Micro-ESPI Technique for Measurement of Micro-Tensile Properties
Measurement of the Piping Elbow Integrity Using the Fiber-Optics Technique
3-Dimensional Micro-Structure Inspection by Phase-Shifting Digital Holography
Fiber-Optic Displacement Sensor to Detect the Vibration of the Thinned U-Section by FAC
Optical Measurement of Two-Dimensional Surface Roughness and Texture Using a Scattered Light Intensity Distribution
Detection of Real Defects in Composite Structures by Laser Techniques
Nondestructive Evaluation of Internal Defects for Composite Materials by Using Shearography
Application of Scanning Laser Source Technique for Nondestructive Flaw Detection
Fatigue Life Estimation Using Diffusion of Laser
Automatic Stress Analyzing System by Digital Speckle Photography Using 2-D Hybrid Method
Detection of Spot-Type Defects on Liquid Crystal Display Modules
Electrical and Optical Properties of SiOC Films with Low Dielectric Constant
Reflow Characteristics of Copper in an Oxygen Ambient
Metallic Multilayer Sputtering on Polycarbonate for EMI Shielding
Ultrasonic Measurement of a Small Deformation of Hard Disk Drive Suspension
Application of the ESPI Method for Thermal Friction Noise in Rear Cover of TV
Interfacial Stresses in Viscoelastic Thin Layer due to Moisture Absorption
Nondestructive and Destructive Characterization of Nano-Structured Multilayer
Measurement of Monodisperse Particle Charge in DC Plasma
Design of Vertical Type Thermal CVD Reactor with Rotating-Disk for New Generation Semiconductor Processes
Fabrication of Nano-Structure by STM Tip Induced Atomic Diffusion
Characterization of Heating Elements with Cobalt Silicide Films for Inkjet Printer
Transparent Conducting ZnO Films on Polymer Substrates by Pulsed Laser Deposition
Diagnosis and Reduction of Robot Arm Vibration for 12-Inch Wafer Spin Scrubber
Effect of Al Composition on Luminescence Properties of Rare-Earth Implanted into AlGaN
Evaluation Method of NFR Sliders Using Modal Analysis and Instrumental Variable Method
The Special UTS for Ultra-High Temperature Measurement in the LaVa at SAC
The Influences of the Wheel Profiles on the Wheel Wear of the Passenger Cars for the Same Bogie Type
Investigation of the Effect of Crack Closure Stress on Microwave Dual Frequency Technique for Evaluation of Small Cracks
Saw Sensor for Train Wheel Monitoring
Finite Element Analysis and Static Load Test of a Wheelset of Gwangju EMU for Measuring Wheel/Rail Force
Axial Flaw Detection in Pipes with Circumferential Wave Excited by Transducers of Equi-Refraction Angle
Infrared Thermography and Modeling to the Concrete Deck with Internal Defects as a Non-Destructive Testing
Measurement Methods of Crack Length for Real-Scale Pipe Specimen
Nondestructive Mapping of Corrosion of Steel beneath Paint Coating by Synchrotron X-Ray Absorption Spectroscopy
Nondestructive Evaluation of Pipes with Local Wall Thinning by Wavelet Analysis of Elastic Wave
Assessment of Creep Damage of Power Plant Pipeline Steel by Ultrasonic Test
Leak Location Identification of Water Pipes Using Elastic Waves
Measurement of Performance and Heat Transport in Thermoacoustic Refrigerator
An Adoption of Energy Dissipation Ratio for Real-Time Monitoring
In Situ Measurement of Average Surface Temperature of a Diesel Engine's Combustion Chamber
Numerical Simulation of Design for Cylinder Wall Considering of Scavenging Efficiency
Nondestructive Fault Diagnosis of a Transformer Using Transfer Function Method
Crack Detection in Press Fit Railway Axle Using Induced Current Focusing Potential Drop Technique
Defect and Ripeness Inspection of Citrus Using NIR Transmission Spectrum
Measurement of Sugar Contents in Citrus Using Near Infrared Transmittance
Measurement of Moisture Content in Powdered Food Using RF Impedance
Assessment of Internal Quality Using Colorimetric Information on Apples
A Quantified Index for Rapid Evaluation of Starch Content in Apples
Weed Detection in Paddy Field Using Machine Vision
Evaluation of Internal Defects of Dried Red Ginseng Using Magnetic Resonance Techniques
Evaluation of Fruit Firmness by Ultrasonic Measurement
Uses of Hyperspectral and Multispectral Laser Induced Fluorescence Imaging Techniques for Food Safety Inspection
Prediction of Melon Fruits Softening Using Density and Transmitted Light
Analysis and Reduction of the Cross Talk in Micro-Machined Piezoelectric Ultrasonic Transducers
Development of SH-SAW Sensors in Underwater Environment for Chemical Applications
On-Chip Integration of Microfluid and Cell Detector for Micro Cell Counter
Optimal Design of a Planar Array of Micro-Machined Ultrasonic Transducers
Fabrication of a High-Aspect-Ratio Nano Tip Integrated Micro Cantilever with a ZnO Piezoelectric Actuator
Novel Micropumps Using Gases as Pumping Sources
Measurements of Mechanical Properties of Thin Polymer Films by Nanoindentation Technique
Measurement of Micro-Tensile Properties for Hard Coating Material TiN
Analyses of Elastic Waves in Aluminum/Barium Sodium Niobate and Quartz/Epoxy Phononic Structures
The Study of Acoustic Band Gaps in 2-D Air/Aluminum and Steel/Epoxy Phononic Structure
Oblique View Cone Beam Tomography for Inspection of Flat-Shape Objects
Non-Contact Measurement of Dielectric Constant for a Nanometer-Thick Polymer Film
Effects of Metal-Plasma Source Ion Implantation on Tribological Properties of a DLC Film
Strength Evaluation of Swing Motion Bogie by Finite Element Analysis
Development of a Code for 2D Elasto-Plastic Fracture Mechanics Analyses Using the Finite Element Alternating Method
Particle Erosion of Aged HK40 Steel
A Study on Fatigue Behavior at Pre-Crack Tip under Mixed-Mode Single Overloading (In the Case of Using the C-Scan Method)
Evaluation of Material Degradation Using Electrical Resistivity Methods
Multiaxial Fatigue Life Prediction of Duplex Stainless Steels with Thermal Aging at 430°C under Axial-Torsional Load
Ultrasonic Evaluation of Fatigue Damaging Process of Cu Plates Joined with Sn-3.8wt%Ag-1.2wt%Cu Alloy Solder
Finding the Degradation of Insulation Oil in a Transformer with a Fiber-Optic Sensor
Numerical Analysis of Adhesive Thickness Effect on Fracture Toughness in Adhesive-Bonded Joints
The Evaluation of Material Degradation in Modified 9Cr-1Mo Steel by the Electrochemical Technique
Degradation Evaluation of 2.25Cr-1Mo Steel Using Electrical Resistivity
The Analysis of Frictional Sliding Behavior on High-Tension Bolted Joints Using the Finite Element Method
Detection of Low Cycle Fatigue in Type 316 Stainless Steel Using HTS-SQUID
Ball Indentation Studies on the Effect of Aging on Mechanical Behavior of 1Cr-1Mo-0.25V Steel
Prediction of Corrosion Fatigue Life of TMCP Steel Using the DCPD Method
Plastic Limit Load Solutions for Cracks in Steam Generator Tubes
Fatigue Properties of Magnesium Alloy under Biaxial Stress
Fracture Behavior under Dynamic Biaxial Stress on Magnesium Alloy
Evaluation of the Mixed Mode Stress Intensity Factor by Infrared Thermography
Determination of Stress Intensity Factor near Crack-Tip of Anisotropic Polycarbonate Plate under Biaxial Loading
Ultrasonic NDE of Closed Cracks-Sizing and Evaluation of Crack Opening Stress Intensity Factor under a No Load Condition
Quantitative Phase Analysis of the Multi-Phase Alloys Using Neutron Diffraction
Very Low Energy Neutron Radiography with Neutron Energy Selection System for Variable Image Contrast
Development of CT Imaging System with Very Low Energy Neutrons
A Monte Carlo Study of Contraband Detection Using Fast Neutron Resonance Technique
Neutron Diffraction Measurement and Finite Element Analysis of Stress Distribution in Welded 316L Stainless Pipe
Development of Flaw Sizing Technique by Radiographic Testing - Application of the "GUCHI" Technique
Processing, Archiving and Management of Digital Image from X-Ray Flat-Panel Detector
Applied Phase-Contrast Radiography with Polychromatic Thermal Neutrons
Application of Neutron Radiography for Researches on Hanaro
Characteristics of the IR Neutron Beam in Hanaro and the Recent Development for its Use in Dynamic Neutron Radiography
Towards the Visualization of Fuel Cavitation in a Nozzle of a Diesel Engine by Neutron Radiography
Quantitative Measurement of Void Fraction Distributions in Gas-Liquid Two-Phase Flow by Neutron Radiography
Application of Digital Radiography to Aerospace-Craft
Experiments on Radiographic Image Quality Using Low Energy Portable X-Ray Equipments
Characteristics of a New Type Neutron Radiography Using Time-of-Flight Method
Requirements of Neutron Tomography Standardization for Industrial Application
Assessment of the Uncertainty and the Proficiency Test for Accrediting KOLAS of ISO 17025 for a Neutron Radiography Facility
The Characteristics of a Mosaic Monochromator with a Cu Single Crystal
A Study for Imaging of Scattered Radiation Sources Using a Pinhole Camera
A Study for L/D Determination of Filtered Neutron Beams Including Scattering Neutrons Component
Fabrication and Characterization of a PVDF Hydrophone Array Transducer
Influence of Stress Singularities on the Vibration of Rhombic Plates with V-Notches or Sharp Cracks
Performance Comparison between Circular and Elliptical Magnetic Circuits in Elliptical Microspeakers Used for Mobile Phones
Computation of Dynamic Stress in Flexible Multi-Body Dynamics Using Absolute Nodal Coordinate Formulation
A Study on DC Motor Noise Reduction
Structural Vibration Analysis of Electronic Equipment for Satellite under Launch Environment
Vibration-Based Non Destructive Structural Damage Detection
Optimal Sensor Placement in Structural Control Systems
Free Vibration of a Circular Membrane with a Concentric Circular Crack
Identification of Wave Propagation on the Beam by Using Combined Higher Order Time-Frequency Method
The Effect of Contact Stiffness on the Out-of-Plane Vibration of a Disc Brake System
Calculation of Truck Weights by Bridge Diagnostic System
On the Feasibility of Deriving Transfer Function from Rayleigh Wave in the Impact-Echo Displacement Waveform
Nondestructive Testing Method and Technique for Cable-Stayed Bridge Steel Cables
Soundness Evaluation of a Tunnel Concrete Lining by Using the Hammer Impact-Induced Sound Wave
Assessment of Post-Fire Residual Strength of Reinforced Concrete Using Ultrasonic Pulse Velocity
Identification of Strength-Reducing Characteristics in Lumber Using Microwave Scanners
State-of-the-Practice & Challenges in Non-Destructive Evaluation of Utility Poles in Service
Time-Frequency Analysis for Impact Echo-SASW (IE-SASW) Method
The Development of Concrete Quality Evaluation System - Automation of Measurement and Wireless Data Transfer
Nondestructive Evaluation of Vibration-Mitigated Concrete by the Forced Resonance Test
Study on Detection Limit of Buried Defects in Concrete Structures by Using Infrared Thermography
Radar Image Processing for Detection of Shape of Voids under Concrete Slab
Quality Control of In-Situ Concrete by Ultrasound Monitoring
Evaluation of Concrete Properties by Stress Wave Propagation Methods
Measurement of Acoustic Emission and Source Location Considering Anisotropy of Rock under Triaxial Compression
Basic Study on Estimation for Water-Cement Ratio of Fresh Concrete Using Ultrasonic Wave
Characterization of Stress-Induced Damage in Rock by the Moment Tensor Analysis of Acoustic Emission
Non-Destructive Evaluation Techniques of Reinforcing Steel Corrosion Using Infrared Thermography
Influence of Shear Load on the Characteristics of Acoustic Emission of Rock-Concrete Interface
Evaluation of Freeze-Thaw Damage in Concrete by One-Sided Stress Wave Velocity Measurement Technique
Damage Evaluation for Steel Bridge Member Using Compliance Technique
Non-Destructive Testing and Evaluation of Civil Infrastructures Using Stress Wave Propagation
Damage Evaluation for Railway Structures by Means of Acoustic Emission
Observation of Internal Cracking in Concrete by Virtual Reality Modeling of Acoustic Emission Moment Tensor Analysis
Practical Use of Half-Cell Potential Method for NDE of Corrosion of Reinforced Concrete Structure
Low Frequency Elastic Wave Diagnosis Method for Detecting the Internal Defects of Concrete Using Metal Magnetostrictive Devices
Characterization of Unsaturated Particulate Materials Using Elastic and Electromagnetic Waves
Investigation of the Track Irregularities Reconstruction Methods
New Modular Concept for Level 3 - Qualification in Germany
Development of the Korean Standardized Carbody for the Rubber-Tired Light Rail Vehicle
Leak Rate Calibration System
Personnel Qualification and Certification in the ISO/TC 135 Community
Identification of Stress-Free State and Mapping of Residual Stress Fields by Laser Interferemetry
Estimation of Failure Probability Using Boundary Conditions of Failure Pressure Model of Buried Pipelines
Applications of Advanced Indentation Technique to Pre-Qualification and Periodic Monitoring of Strength Performance of Industrial Structures
Burst Pressure of Damaged Steam Generator Tubes from Plastic Instability Analysis
The Evaluation of Fatigue Life in TWB Sheet Using Magnetic Method
Nondestructive Evaluation of Defects in Conductive and Non-Conductive Materials by High-Frequency Signal Transmission Characteristics Technique
The MTTF and Reliability Evaluation of a PLC System
Safety Evaluation of Socket Weld Integrity in Nuclear Piping
Piping Failure Analysis for the Korean Nuclear Piping Including the Effect of In-Service Inspection
Analysis of Singular Thermal Stresses in Polymeric Layer Deposited on Concrete Substrate
Statistical Reliability Assessment of UT Round-Robin Test Data for Piping Welds
Reliability Analysis of the Reactor Protection System with Fault Diagnosis
Comments on Probabilistic Fracture Mechanics Analysis of Cracked Components
Detection of Micro-Delamination in Electronic Packaging by Using the Ultrasonic Nonlinearity
An Effective Method for Measuring Elastic Modulus of Large TFT-LCD Panels
A Development of Optimization Tool for Mechanical Shock Proof Design of a Digital Display Panel
Measurement of Residual Stress in PDP Glass by Chemical Etching Method
Imaging of Defects in Thin Plate by Scanning of Laser-Generated Focused-Lamb Waves
The Novel Concepts for Reliability Technology
Inspection of Inhomogeneities in Carbon/Phenolic Matrix Composite Materials Using NDE Techniques
Development of Motorized Ultrasonic NDE Scanner for Layup Evaluation of CFRP Composites
Electric Resistance Change Method for Cure/Strain/Damage Monitoring of CFRP Laminates
Evaluation of Thermal Deformation Process of Nickel Base Active Composite by Laser AE Technique
Fracture Processes and Acoustic Emission in Continuous Fiber Reinforced Composite Laminates
Nondestructive Evaluation of Adhesively Bonded Joints Using Ultrasonic Technique
Development of On-Line Monitoring System and AE Characterization of SMA Composite under Severe Conditions
Development of Fieldable Systems for Inspecting Aircraft Composite Structures
Development of the Two-Step Delamination Identification Method by Resonant and Anti-Resonant Frequency Changes
Delamination Identification of CFRP Structure by Discriminant Analysis Using Mahalanobis Distance
Influences of Cracking Behavior of Coating Film on Fatigue Strength in Alumina Coated Stainless Steels
Evaluation of Apparent Interface Toughness of Ceramic/Metal Composites Using Indentation Method
Analysis of Bending and Impact Damage Behavior of CFRP/Al7075 Hybrid Composite Plate by NDT Technology
Air-Coupled Ultrasonic Inspection Method for CFRP
Nondestructive Evaluation of Interfacial and Damage Sensitivity for Single Fiber/Epoxy Composites with PVDF and PZT Sensors Using Micromechanical Test and Acoustic Emission
A Fundamental Study of Detecting Delaminations in Composite Tanks by Using Lamb Waves
Fiber Arrangements on Densification Behavior of Titanium Metal Matrix Composites
Impact Response and Damage of Composite Shell with Various Curvatures
The Effects of Temperature Change on the Bending Strength of CF/PEEK Laminates after Impact
Analysis for Properties of Discontinuously-Reinforced Composites on the Basis of Micromechanics
Embedded PVDF Film Sensor for In-Situ Monitoring of Structural Integrity of Laminated Composites
Effect of Fiber Volume Fraction on Monitoring Delamination of CFRP Laminates with Electric Resistance Change Method
Application of Localized Flexibility Method to Damage Detection of CFRP Space Frame
Acoustic Emission during Fracture Process of Rubber-Modified Epoxy Resin
Measurement of Moisture Absorption Ratio of FRP Using Micro Polymer Sensor
Cure Monitoring and Microfailure Sensing of Single-Fiber Reinforced Cement Composite by Measurement of Contact Resistance and Acoustic Emission
Detection of Crack Source Location on RC Structures Strengthened with CFRP Plate for Health Monitoring System
Critical Threshold Value for Monitoring & Management of Cable Tension Force in Cable-Stayed Bridge
Health Monitoring Method Using Committee of Neural Networks
Running Safety Estimation of Korean Style High Speed Railway Vehicle
Wireless Instrumentation System for Measuring the Dynamic Characteristics of a Beam
Plastic Collapse Evaluation on the Notched Stainless Steel Piping Subjected to Combined Tension and Bending by Photo-Elastic Coating
On-Line Monitoring of Cable Defects by RF Detection
An Analysis of the Characteristics of SPG Bridges Using NExT and ERA for Real-Time Monitoring
A Faster Wavelet Analysis Algorithm Based on DSP/BIOS
Design Strategies for Phased Array Ultrasound Systems in Nondestructive Testing
Potential for the Diagnosis of Micro Bone Fractures Using an Ultrasonic C-Scan Technique
Ultrasonic Backscatter Response to Blood Flow Disturbance by a Severe Eccentric Stenosis
Imaging of Thermally Ablated Tissue Using Ultrasonic Elastography
The Fatigue Delamination due to Four Different Stacking Sequences of Ankle Foot Orthosis (A.F.O.) in GFRP Laminates
Ultrasonic Techniques to Assess the Properties of Hard and Soft Biological Tissues
A Nondestructive Diagnostic Modeling for Muscular Dysfunction of Human Pharynx Using Finite Element Method
Evaluation of Dynamic Behavior of the Human Middle Ear with Nonhomogeneity by Finite Element Method
Nondestructive Evaluation of the Mechanical Behaviors of the Human Femoral Head with Osteonecrosis
Evaluation of Human Bone Elastic Stiffness by Resonant Ultrasound Spectroscopy and Micro Finite Element Method
Quantitative Estimation of Diffused Liver Diseases Using Ultrasound Echo Signal
In Vitro Evaluation of Fracture Resistance of Various Thickness Fiber-Reinforced Composite Inlay FPD
Dynamic Bridge Structure Monitoring Using Smart Elastomeric Bearing Equipped with PVDF Polymer Film
ER/MR Fluids Characterization at High Frequencies
Dynamic Strain Measurement with Fiber Bragg Grating Sensor System for Smart Structure
Effects of Shape Memory Alloys on Structural Modification
Application of Magnetorheological Fluid to Semi-Active Control of Building Structures by BRI and Partners
Multiplexing of FBG Sensor by Light Source Intensity Modulation
Measurement of Material Properties of Composites under High Temperature Using Fiber Bragg Grating Sensors
Simultaneous Monitoring of Crack Signals and Strain of Composites Using a Stabilized EFPI Sensor System
Design and Analysis of Multilayer Surface-Antenna-Structure
Collocation Strategies of Piezoelectric Sensor and Actuator Pair for Smart Structures
Effect of Crack Closure in Shape Memory Alloy TiNi Fiber Reinforced/CFRP Composite
Distribution of Unique Performances for Shape Memory Alloy Composite
Effect of Temperature Caused for Mechanical Characteristics and Crack Closure Effect of Shape-Memory Alloy Fiber Reinforced Composite
Active Vibration Control Using Cantilever Beam of Smart Matrix Composite with Embedded Shape Memory Alloy
Application of Smart Materials to Composite Structures
Risk-Informed Inservice Inspection Program for Ulchin Unit 4
Criterions of UT Thickness Measurement on Thinned Pipe Management Program
Equipment Development and Nondestructive Examination Techniques for Inspection of Reactor Pressure Vessel Head Penetration
Application of Nondestructive Testing Technique for Safeguards Inspection
The Development of Fusion Sensor Techniques for Condition Monitoring of a Check Valve
Development of a Web-Based Integrity Evaluation System for Primary Components in a Nuclear Power Plant
Development of an On-Line Ultrasonic System to Monitor Flow-Accelerated Corrosion of Piping in Nuclear Power Plants
Inspection of the Defect in an Irradiated Fuel Rod Using the Probe of a Differential Encircling Coil Type
Development of an Integrity Evaluation System on the Basis of Cooperative Virtual Reality Environment for Reactor Pressure Vessel
Irradiation Behavior of Fe-Cu Model Alloys Analyzed with the Positron Annihilation Lifetime Technique
Hand-Eye Coordination of a Robot for the Automatic Inspection of Steam-Generator Tubes in Nuclear Power Plants
Fatigue Analysis of Nuclear Welded Structures Considering FSRF Based on NDE
SANS Study of Precipitate and Recrystallization in Ti-Added Extra Low Carbon Steels
A Feasibility Study on Aluminum Nitride Pieces for an Application to the Nuclear Power Plant Flux Detector
Development of a Neutron Tomography at HANARO
Detection of Cracks in Stud Bolts of Nuclear Reactor by Novel Ultrasonic Technique
Development of Ultrasonic Inspection Technique for Epoxy Liner in Nuclear Fuel Interim Storage
A Study on the Effect of Welding Residual Stress on Fatigue Behavior by Finite Element Analysis
A Study on the Effect of Welding Residual Stress and Weld Bead Profiles on Fatigue Behavior
On-Line Penetration Depth Measurement System Using Infrared Temperature Sensing on Co2 Laser Welding
Stereo Vision System for Welding Line Tracking Robot
Outline of Laboratory Accreditation Scheme for Nondestructive Testing Organizations
Studies on the Microstructure and Corrosion Characteristics of Electrical Resistance Welded Steel
Measurement of Weld Bead Defect for Shock Absorber Using Laser Vision Sensor
A Study of Nondestructive Weld Quality Inspection and Estimation during Resistance Spot Welding
Non-Destructive Characteristics Evaluation for Low Vacuum Dry Pumps in the Semi-Conductor Manufacturing Process Line
A Study on an Accurate Seam Detecting Sensor for Laser Welding Automation
Neural Network Analysis for Evaluating Welding Process
CO2 Laser Welding of 800MPa Grade TRIP Steel
A Study on the Mechanical Behaviors in Welded Parts by Numerical Simulation
A Study on the Lamination Produced by Corner Joint Welding of Ultra Thick Plate by Newly Designed Z-Quality Evaluation Methods
Basic Experiments by Hybrid Welding to Steels for Shipbuilding
Welding of Steel and Aluminum by Nd-YAG Laser
