Reimers / Quander Residual Stresses VII, ECRS7

Erscheinungsjahr 2006
ISBN: 978-3-03813-049-9
Verlag: Trans Tech Publications
Format: PDF
Kopierschutz: 0 - No protection

E-Book, Englisch, 1000 Seiten

Volume is indexed by Thomson Reuters CPCI-S (WoS).The Seventh European Conference on Residual Stresses (ECRS7), was held in Berlin, Germany, on the 13-15th September 2006.

Autoren/Hrsg.

Reimers, W.

Quander, S.

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde

Inhaltsverzeichnis

The Importance of Residual Stresses in Microelectronic Products and Materials

SESSION 1A: MEASURING METHODS I
An X-Ray Diffraction Method to Determine Stress at Constant Penetration/Information Depth

Mechanical Stress Gradients in Thin Films Analyzed Employing X-Ray Diffraction Measurements at Constant Penetration/Information Depths

Sub-Surface Residual Stress Gradients: Advances in Laboratory XRD Methods

Determination of Real Space Residual Stress Distributions sij(z) of Surface Treated Materials with Diffraction Methods Part I: Angle-Dispersive Approach

Determination of Real Space Residual Stress Distributions sij(z) of Surface Treated Materials with Diffraction Methods Part II: Energy Dispersive Approach

SESSION 1B: MATERIAL PROCESSING I
The Residual Stresses Generated by Deep Rolling and their Stability in Fatigue & Application to Deep-Rolled Crankshafts

Stability of Residual Stresses of Deep Rolled Sintered Iron at Quasistatic and Cyclic Loading

Residual Stress Stability in High Temperature Fatigued Mechanically Surface Treated Metallic Materials

Residual Stresses Induced by Cross-Rolling
SESSION 1C: SIMULATION I
Geometry Effects when Controlling Residual Stresses in Friction Stir Welds by Mechanical Tensioning

Measuring and Predicting the Effects of Residual Stresses on Crack Propagation

A Novel Closed-Form Calculation of the Stress Intensity Factor for a Crack in a Residual Stress Field

Residual Stresses in 3D Sheet Metal Guillotining Using a Coupled Finite Elastoplastic Damage Model

Residual Stress State at Different Scales in Deep Drawn Cup of Unstable Austenitic Steel

SESSION 2A: MEASURING METHODS II
White Beam Microdiffraction Experiments for the Determination of the Local Plastic Behaviour of Polycrystals

Inter- and Intragranular Stress Determination with Kossel Microdiffraction in a Scanning Electron Microscope

Determinability of Complete Residual Strain Tensor from Multiple CBED Patterns

FibDAC - Residual Stress Determination by Combination of Focused Ion Beam Technique and Digital Image Correlation

SESSION 2B: MATERIAL PROCESSING II
Residual Stress State and Fatigue Behaviour of Laser Shock Peened Titanium Alloys

Dynamic Analysis of Residual Stress Introduced by Laser Peening
Strengthening of Si3N4 Ceramics by Laser Peening
X-Ray Diffraction in Failure Analysis of Rolling Bearings
Relaxation of Residual Stresses in and around Mechanical Fasteners Due to Fatigue Loading

SESSION 2C: SIMULATION II
A Kinematic Hardening Finite Elements Model to Evaluate Residual Stresses in Shot-Peened Parts, Local Measurements by X-Ray Diffraction

Thermomechanical Modelling of a Steel Plate Impacted by a Shot and Experimental Validation

Material Flow Curve Influence on Macroscopic Residual Stresses in the Workpiece Bottom in High-Pressure Sheet Metal Forming

Experimental and FEM Analysis of Cutting Sequence on Residual Stresses in Machined Layers of AISI 316L Steel

Effect of Residual Stresses on Mechanical Properties of Duplex Stainless Steel Studied by Diffraction and Self-Consistent Modelling

POSTER SESSION I
The Materials Science Beamline EDDI for Energy-Dispersive Analysis of Subsurface Residual Stress Gradients

Design of Engineering Diffractometer at J-PARC
E7 - New Strain Scanner at HMI - High Q-Resolution for Phase-Sensitive Analysis of Stress Distributions

The New Materials Science Diffractometer STRESS-SPEC at FRM-II
SALSA: Advances in Residual Stress Measurement at ILL
The New and Upgraded Neutron Instruments for Materials Science at HMI - Current Activities in Cooperation with Industry
Review of Residual Stress Determination and Exploitation Techniques Using X-Ray Diffraction Method

New Type of Diffraction Elastic Constants for Stress Determination
Residual Stress Reconstruction by Variational Eigenstrain Procedures
Application of the cos a Method to Area Detector Type Neutron Stress Measurement
Residual Stress Distribution in Pure Bending Beam Subjected to Tensile Failure on One Side

Evaluation of Uncertainties of Measurement for Residual Stresses in Coatings Determined by the Dilatometric Method

SESSION 3A: MEASURING METHODS III
Aspects of Residual Stress Determination Using Energy-Dispersive Synchrotron X-Ray Diffraction

Micro Diffraction Imaging of Bulk Polycrystalline Materials
Determination of Residual Stress Fields with High Local Resolution
Evaluation by Synchrotron Radiation of Shape Factor Effects on Residual Stress in Nitrided Layers

Residual Stress Analysis Around Foreign Object Damage Using Synchrotron Diffraction

SESSION 3B: MATERIAL PROCESSING III
Residual Stress in Laser Bent Steel Components
The Influence of Aluminium Alloy Quench Sensitivity on the Magnitude of Heat Treatment Induced Residual Stress

Effect of Residual Stress on High Temperature Deformation in a Weld Stainless Steel

Influence of Heat Treatment and Grinding Conditions on Surface Residual Stresses in the Production of Rollers

Residual Stress Prediction and Relaxation in Welded Tubular Joints under Constant Cyclic Loading

SESSION 3C: SIMULATION III
Numerical and Experimental Analysis of Residual Stress Induced by Elastic-Plastic Bending, Tension or Torsion Loading

Analysis of the Impact of a Shot at Low Velocity Using the Finite Element Method. Application to the Ultrasonic Shot-Peening Process

Residual Stress Analysis in Shot Peened and Fretting Fatigued Samples by the Eigenstrain Method

Finite Element Simulation of the Residual Stress States after Shot Peening
Residual Stresses due to High Temperature Annealing. Mathematical Model and Calculations
INVITED LECTURE
Influence of Residual Stress Redistribution on Fatigue Crack Growth and Damage Tolerant Design
SESSION 4A: MEASURING METHODS IV
Neutron and X-Ray Diffraction Analysis of Residual Stresses in Cold-Rolled Pearlitic Steel Sheet
Residual Stress in Railway Rails by IP/cosa Method
Feasibility of Thermal Strain Measurements during Quasi-Steady State Using Neutron Diffraction
A Comparison of Strain Measurements on an Inertia Friction Weld Using the ENGIN-X and SALSA Neutron Strain Mapping Instruments
SESSION 4B: MATERIAL PROCESSING IV
Residual Stresses in Welded Joints after Different Mechanical Surface Treatments
Characterisation of Residual Stresses by X-Ray Diffraction of Laser Welded AZ91 Magnesium Alloy
Residual Stresses in Laser Beam Welded Butt Joints of the Airframe Aluminium Alloy AA6056
Residual Stress Analysis of Laser Welded Aluminium T-Joints Using Neutron Diffraction
SESSION 4C: SIMULATION IV
Diffraction Post-Processor for Polycrystalline Plasticity Modelling
Numerical Simulation of Residual Stresses during the Heat Treatment of Dies Made of Hot Work Tool Steel
Numerical and Analytical Scale-Transition Prediction of Hygro-Mechanical Stresses in Multidirectional Carbon-Epoxy Laminates
Letterbox Type Repair Weld Finite Element Simulation and Residual Stress Prediction
SESSION 5A: MEASURING METHODS V
Ultrasonic Stress Measurement in Welded Component by Using Lcr Waves: Analysis of the Microstructure Effect
Ultrasonic Stress Measurement: Application to Preload Assessment on Already Tightened Bolts
A new Approach in Residual Stresses Analysis by Speckle Interferometry
Laser Photoacoustic Microscopy of Mechanical Stresses in Modern Ceramics and Metals
SESSION 5B: MATERIAL PROCESSING V
Experimental Study of the Influence of a Trailing Heat Sink on the Welding Residual Stress Distribution
Development and Effects of Residual Stresses in Joints Produced by Electromagnetic Compression and its Implication on the Mechanical Properties
Post-Weld Heat Treatment Stress Relaxation in Zircaloy 4 Plasma Welds
Development of Instrument for Residual Stress Measurement in a 50 mm Inner Diameter Power Generation Pipes
SESSION 5C: SIMULATION V
Effect of Grain Size Distribution on Second Order Stresses in Plastically Deformed Polycrystals
Numerical Study of the Influence of Dislocation Microstructure on Metallic Materials Mechanical Behaviour
Numerical Simulation of Residual Stresses at the Grain and Sub-Grain Length Scale Using Atomistic Modeling
Plastic Heterogeneities Characterisation in 16MND5 RPV Steel by X-Ray Diffraction, Comparison with Finite-Element Approach
SESSION 6A: MEASURING METHODS VI
Measuring the Variation of Residual Stress with Depth: A Validation Exercise for Fine Incremental Hole Drilling
Residual Stress Analysis in Crankshaft Using the Hole Drilling Method
Method for Mapping Multi-Axial Residual Stresses in Continuously-Processed Bodies

Deep Hole Drill Residual Stress Measurement Technique Experimental Validation

Application of Hole-Drilling Method in Practice
SESSION 6B: MATERIAL PROCESSING VI
Measurement and Interpretation of Residual Stresses Induced in Ti-17 by Machining Conditions

Effect of Laser Assistance Machining on Residual Stress and Fatigue Strength for a Bearing Steel (100Cr6) and a Titanium Alloy (Ti 6Al 4V)
Influence of Work Material Properties on Residual Stresses and Work Hardening Induced by Machining
Residual Stress in High-Pressure Water Jet Assisted Turning of Austenitic Stainless Steel
Characterisation of Residual Stresses in Machined Surfaces of a High Strength Nickel-Base Superalloy
SESSION 6C: LAYERS I
Residual Stresses Gradient Determination in Cu Thin Films
X-Ray Diffraction Analysis of Nonuniform Residual Stress Fields sii(t) under Difficult Conditions
Residual Stress Gradients in PVD-Coated Carbide Cutting Tools
Measurement of Residual Stresses in Thin Films by Two-Dimensional XRD
Residual Stress Evolution during Decomposition of Ti(1-x)Al(x)N Coatings Using High-Energy X-Rays
POSTER SESSION II
A Comparative Study of Microstructure and Residual Stresses of CMT-, MIG- and Laser-Hybrid Welds
Strain Scan and Texture of an Anhydrite-Dolomite Rock from the Piora-Syncline (Switzerland)
In Situ Neutron Diffraction Study on the Mechanical Behavior of an Ultra-Fine-Grained Steel
SESSION 7A: MEASURING METHODS VII
Determination of Welding Residual Stresses with Help of the Micromagnetic Measurement Method
Measurement of Residual Stress in an A533B Ferritic Steel Plate Containing a Repair Weld
Layer Growing/Removing Method for Determination of Residual Stresses in Thin Orthotropic Inhomogeneous Discs
Residual Strain Measurement of C/C-SiC Tubes at High Temperature
Residual Stress Measurements in Single and Multi-Pass Groove Weld Specimens Using Neutron Diffraction and the Contour Method
SESSION 7B: MATERIAL PROCESSING VII
The Effect of Plastic Anisotropy on the Residual Stress within a 316L Stainless Steel Bead-on-Plate Specimen
Grinding-Induced Residual Shear Stresses
Evaluation of Subsurface Distribution of Residual Stress in Austenitic Stainless Steel Using Strain Scanning Method
Residu