The Minerals TMS 2020 149th Annual Meeting & Exhibition Supplemental Proceedings

1. Auflage 2020
ISBN: 978-3-030-36296-6
Verlag: Springer International Publishing
Format: PDF
Kopierschutz: 1 - PDF Watermark

E-Book, Englisch, 2046 Seiten, eBook

Reihe: The Minerals, Metals & Materials Series

This collection presents papers from the 149th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.

Zielgruppe

Research

Autoren/Hrsg.

The Minerals, Metals & Materials Society

Inhaltsverzeichnis

1;Contents;6
2;Part I Advanced Real Time Imaging;28
3;1 In Situ Analysis of Incipient Melting in a Novel High Strength Al–Cu Cast Alloy Using Laser Scanning Confocal Microscopy (LSCM);30
4;2 In Situ Diagnosis and Modeling of Disorder Trapping in Rapid Solidification of Intermetallic Compound;40
5;3 Development of HT-LSCM Techniques for the In Situ Study of the Peritectic Phase Transition;51
6;4 Sub-rapid Solidification Study of Silicon Steel by Using Dip Test Technique;64
7;5 HT-LSCM as a Tool for Indirect Determination of Precipitates by Real-Time Grain Growth Observations;72
8;6 A Novel Method of Research on Dissolution Kinetics of Alumina in Mold Flux Based on Hot Thermocouple Technique;81
9;7 Study on the Interaction Process Between Mold Flux and TiN/TiO? by Sessile Drop Method;91
10;8 Real-Time Imaging of Melting and Crystallization of Synthetic Ferronickel Slags with Varying B?O? Content;99
11;9 An Investigation of the Impact Experimental Equipment Parameters Have on Synthetic Slag Behaviors in an Oxidative Environment Using a Confocal Laser Microscope;107
12;Part II Additive Manufacturing Fatigue and Fracture IV: Toward Confident Use in Critical Applications;118
13;10 Expedited Optimization of AM Materials Using Miniaturized Testing;119
14;11 Improvement of Fatigue Strength in Lightweight Selective Laser Melted Alloys by In-Situ and Ex-Situ Composition and Heat Treatment;136
15;12 A Fatigue Life Approach for Additively Manufactured Structures;148
16;13 Deriving the Structural Fatigue Behavior of Additively Manufactured Components;159
17;Part III Additive Manufacturing for Energy Applications II;170
18;14 Mechanical Testing of 3D Printed Materials;171
19;15 Microstructural Characterization and Thermomechanical Behavior of Additively Manufactured AlSi10Mg Material and Architected Cellular Structures;182
20;16 Preliminary Concepts of an Automated Additive Manufacturing System for Accident Tolerant Uranium Silicide Fuel Pellets;191
21;Part IV Additive Manufacturing: Advanced Characterization with Synchrotron, Neutron, and In Situ Laboratory-Scale Techniques;198
22;17 Creep Behavior of a AlSiMg Alloy Produced by Additive Manufacturing;199
23;18 Microstructural Development and Mechanical Properties of Selective Laser Melted Co–Cr–W Dental Alloy;208
24;Part V Additive Manufacturing: Alternative Processes (Beyond the Beam);216
25;19 Characterization of 17-4 PH Processed via Bound Metal Deposition (BMD);217
26;20 Portland 3D Printing of Portland Cement Pastes with Additions of Kaolin, Superplastificant, and Calcium Carbonate;229
27;21 Additive Manufacturing of Aluminum Using Friction Stir Deposition;239
28;22 Impacts of Friction Stir Processing on Microstructure and Corrosion Properties of DMLS-AlSi10Mg;251
29;23 Effect of Counter-Gravity 3D Printing on PLA Interlayer Fracture Energy;261
30;24 Production of Teaching Materials Through 3D Printing as Support for Educational Processes Related to the Sciences, Heritage, and Culture;268
31;Part VI Additive Manufacturing: Materials Design and Alloy Development II;275
32;25 A Novel Titanium Alloy for Additively Manufactured Orthopaedic Implants;276
33;26 Hybrid Additive Manufacturing of MS1-H13 Steels via Direct Metal Laser Sintering;286
34;27 On the Effect of Building Direction on the Microstructure and Grain Morphology of a Selective Laser Melted Maraging Stainless Steel;293
35;Part VII Additive Manufacturing: Processing Effects on Microstructure and Material Performance;304
36;28 Phase-Field Simulation of Solidification Behavior of AlSi10Mg Alloys Manufactured Through Direct Metal Laser Sintering;305
37;29 Low Surface Roughness Additively Manufactured AlSi10Mg: The Impacts on Corrosion and Water Repellency Properties;314
38;30 Experimental Evaluation of Additively Manufactured Continuous Fiber Reinforced Nylon Composites;326
39;31 Annealing of Additively Manufactured Inconel 625;334
40;32 Critical Quenching Rates After Solution Annealing: Peculiarities of Aluminum–Silicon Alloys Fabricated by Laser Powder-Bed Fusion;346
41;33 Effect of Scanning Strategy on Additively Manufactured Ti6Al4V;357
42;34 Experimental Study on the Laser Cladding of T15 Coating for 42CrMo Steel;370
43;35 Gamma-Titanium Intermetallic Alloy Produced by Selective Laser Melting Using Mechanically Alloyed and Plasma Spheroidized Powders;378
44;36 Investigation of Martensite ?’ Phase Transformation During Heat Treatment of High-Speed Selective Laser Melted Ti6Al4V Components;387
45;37 Mechanical Properties of AlSi10Mg Processed by Laser Powder Bed Fusion at Elevated Temperature;396
46;38 Microstructural Characteristics of Stainless Steel 316L Processed by Selective Laser Melting Technology;406
47;39 Microstructure and Mechanical Properties of AISI 420 Stainless Steel Produced by Wire Arc Additive Manufacturing;414
48;40 On the Heat Treatment of AlSi10Mg Fabricated by Selective Laser Melting Process;426
49;41 On the Microstructure and Corrosion Behavior of Wire Arc Additively Manufactured AISI 420 Stainless Steel;436
50;42 On the Size Effects in Additively Manufactured Titanium and the Implications in AM Components;450
51;43 Precipitation Behaviour and Its Strengthening Effect of Maraging Steel in Laser Cladding Remanufacturing;458
52;44 Scaling up Build Rates in Laser Powder Bed Fusion of Metals Using Dimensionless Parameters;470
53;45 The Effects of LENS Process Parameters on the Behaviour of 17-4 PH Stainless Steel;481
54;46 The Process Parameters Extended Criterion for Laser Engineered Net Shaping of Inconel 738;491
55;Part VIII Advanced High Strength Steels IV;503
56;47 A Novel High-Strength Oxidization-Resistant Press Hardening Steel Sheet Requiring No Al–Si Coating;504
57;48 Effect of the Cooling Time on the Cross Tensile Strength of the Resistance Spot Welded Medium Manganese Steel;513
58;49 In Situ Observation of the Peritectic Reaction and Transformation in a Commercial HSLA Steel;522
59;50 Effect of Al Content and Solution Treatment on Tensile and Corrosion Resistance of Fe–Mn–Al–C Low-Density Steel;534
60;51 Effects of M (M=Ce, Zr, Ce–Zr) Compound Treatment on Characteristics of Inclusions and Microstructure FH40 Ship-Building Steel Ingots;546
61;52 Multi-scale Modeling of Hydrogen Embrittlement in High-Strength Steels;558
62;53 Electrochemical Characterization of Advanced High Strength Steel DP 780 MPa;568
63;Part IX Advanced Magnetic Materials for Energy and Power Conversion Applications;578
64;54 High-Performance Amorphous Wire Magneto-Impedance Sensor for Biomagnetic Field Detection;579
65;55 A Study of Processing High-Grade Magnetite Concentrates by Combination of Magnetic Separation and Reverse Flotation Separation to Prepare Raw Materials for Ferrite Magnet;590
66;56 Electrochemical Polishing of Thin Metallic Glass Ribbons;597
67;57 Structure and Magnetic Properties of Novel High-Magnetization Fe–Mn Powders Synthesized by Hydrogen Reduction of Nanoferrites;606
68;58 Low-Temperature Synthesis of Superparamagnetic Fe?O? Morphologies Tuned Using Oleic Acid as Crystal Growth Modifiers;611
69;Part X Advanced Materials for Energy Conversion and Storage VI;624
70;59 Preformed Oxide Scale Chemistry and Its Influence on Local Metal Loss During Dual Atmosphere Corrosion;625
71;60 Preparation of Macro Encapsulated Phase Change Materials for High Temperature Energy Storage Applications;636
72;61 Enhanced Stability of B-Site W Doped Pr?.?Sr?.?Fe?-xWxO?-? Ceramic Membranes for Water Splitting;645
73;62 Fe?O? Nano-particles Grown on Carbon Fabric as a Freestanding Anode for High-Performance Lithium-Ion Batteries;657
74;63 Study on the Influence of Different Preheating Conditions on Carbon Structure of 1/3 Coking Coal;664
75;64 Synthesis of Nanoencapsulated Phase Change Materials with Ag Shell for Thermal Energy Storage;674
76;Part XI Advanced Microelectronic Packaging, Emerging Interconnection Technology and Pb-free Solder;682
77;65 Bonding and High-Temperature Storage Performance of Die Attachment with Ag Paste Sintering on Bare Direct Bonding Aluminum (DBA) Substrate;683
78;66 Fatigue and Creep Properties of Sintered Ag Paste from Room Temperature to High Temperature;693
79;67 Reliability Behavior of Surface Mount Devices Assembled with Bismuth Bearing Low-Melt Solder Pastes;703
80;Part XII Advances and Discoveries in Non-equilibrium Driven Nanomaterials and Thin Films;719
81;68 The Transition from Amorphous Carbon to Carbon Nanohorns by DC Arc Discharge;720
82;Part XIII Advances in Biomaterials for 3D Printing;727
83;69 Design of Metallic Lattices for Bone Implants by Additive Manufacturing;728
84;Part XIV Advances in Surface Engineering II;743
85;70 Effects of Ti and Y Addition on the Scale Spalling Resistance of CoNiCrAl Alloys;744
86;71 Electroplating Powder for Cold Spray Applications;749
87;72 Investigation on the Laser Surface Treatment of Steel and Aluminum with a Single-Mode Pulsed Fiber Laser Source;755
88;Part XV Advancing Current and State-of-the-Art Application of Ni- and Co-based Superalloys;763
89;73 On the Temperature Limits of Ni-Based Superalloys;764
90;74 Microstructure Evolution of the 410 Stainless Steel and Co-Based Alloy Dissimilar Welded Joint Manufactured by Electron Beam Welding;772
91;75 The Role of Microstructural Homogenization on Tensile and Stress-Rupture Behavior of Selective Laser Melted Nickel Based 718 Alloy;781
92;Part XVI Algorithm Development in Materials Science and Engineering;792
93;76 Development of an Evolutionary Deep Neural Net for Materials Research;793
94;77 An Improved Collocation Method to Treat Traction-Free Surfaces in Dislocation Dynamics Simulations;805
95;78 Simulation of Compressive Stress–Strain Curve for Additive Manufactured Ti6Al4V Cuboctahedron Cellular Structure;811
96;Part XVII Bio-Nano Interfaces and Engineering Applications;819
97;79 Molecular Mechanisms in Metal Oxide Nanoparticle Interactions with Biomolecules;820
98;80 Removal of Chromium (VI) from Water onto Activated Carbon by Adsorption in Dynamic Mode;829
99;Part XVIII Biological Materials Science;838
100;81 Effect of Nanoclay Reinforcement on the Property of Rubber Seed Oil Polyurethane Nanocomposites;839
101;82 Characterization of Soft Actuation Through Ultrasonic Atomization;852
102;83 Active Metamaterial Skins for Friction Coefficient Control;860
103;84 The Effect of the Addition of Cobalt Powder on Compressive Properties of Porous Titanium as Bone Substitute Materials;867
104;Part XIX Bulk Metallic Glasses XVII;876
105;85 Effect of Ni–Nb Metallic Glass on Moderating the Shock Damage in Crystalline Ni-Amorphous Ni??Nb?? Nanocomposite Structure: A Molecular Dynamics Study;877
106;Part XX Coatings and Surface Engineering for Environmental Protection II;890
107;86 Estimating the Effect that Interactions Between Chemical Reactions and Environmental Influences Have on the Corrosivity of the Electrolyte;891
108;87 The Effect of Surface Treatment on the Performance of a Zirconium-Based Conversion Coating on AA7075 Automotive Alloys for Protection Against Filiform Corrosion;903
109;88 Cold Spray Coating for Corrosive Conditions;913
110;89 Corrosion Control by Using Zinc as Sacrificial Anode Cathodic Protection in Geopolymer Concrete;917
111;90 Corrosion Resistance and Electrochemical Corrosion Characteristics of Stainless Steel for Seawater Desalination Evaporator;924
112;91 Establishment of a Lead Loop Facility to Support Lead Cooled Fast Reactor Design;937
113;Part XXI Computational Discovery and Design of Emerging Materials;945
114;92 Analysis of Chemical Activity of Bismuthene in the Presence of Environment Gas Molecules by Means of Ab Initio Calculations;946
115;Part XXII Computational Materials Science and Engineering of Materials in Nuclear Reactors;955
116;93 Molecular Dynamics Simulations of Phosphorus Migration in a Grain Boundary of ?-Iron;956
117;94 Recent Development of Thermochimica for Simulations of Nuclear Materials;964
118;95 Development of a New Thermochemistry Solver for Multiphysics Simulations of Nuclear Materials;974
119;Part XXIII Computational Thermodynamics and Kinetics;987
120;96 Experimental and Modeling Studies Using Fe?O? Doped Coke;988
121;97 Kinetic Monte Carlo Simulations of Effect of Grain Boundary Variability on Forming Times of RRAM Conductive Filaments;998
122;98 Kinetics of Scrap Melting in Iron–Carbon Bath;1005
123;99 Mesoscopic Model of Free Surface Behaviour in the Continuous Casting Mold;1018
124;100 Numerical Study of Raceway Shape and Size in a Model Blast Furnace;1028
125;101 Reduction Kinetics Analysis of Fe?O? in the Case of Carbon Precipitation;1039
126;Part XXIV Defects and Properties of Cast Metals;1048
127;102 An Experimental Characterization of Thermophysical Properties of a Porous Ceramic Shell Used in the Investment Casting Process;1049
128;103 Defects Comparison Between Single- and Double-Sided Electron Beam Welded Dissimilar DP600 Steel to 5754 Al Alloy Joints: X-Ray Tomography Study;1060
129;104 The Influence of Ultrasound on the Microstructure Formation during the Solidification of A356 Ingots Processed via a 2-Zone Induction Melting Furnace;1070
130;105 An Investigation on Wear Properties of A390 Alloy by Rare Alloying Elements;1080
131;106 How to Prevent Gas Porosity Defects in Castings of Stator Housing in Grey Cast Iron;1091
132;107 Study on the Dendrite Arm Spacing of S50C Steel Produced by CSP;1101
133;108 Multiphase Flow-Related Defects in Continuous Casting of Steel Slabs;1112
134;109 Analysis of Solidification and Thermal-Mechanical Behaviors in Continuous Casting;1125
135;110 Numerical Simulation of Macrosegregation Behavior of Billet During Continuous Casting;1138
136;111 Component Analysis of Defects in Secondary Special Brass Alloy;1149
137;112 Microstructure Evolution and Chemical Composition in Continuous Directional Solidification Cu–P–Sn Alloy;1162
138;Part XXV Deformation and Transitions at Grain Boundaries VII;1169
139;113 Stress Induced Fracture Transition in High-Temperature 9% Cr–CrMoV Dissimilar Welded Joint;1170
140;Part XXVI Electrometallurgy 2020;1179
141;114 Effective Copper Diffusion Coefficients in CuSO?–H?SO? Electrowinning Electrolytes;1180
142;115 A 3-D Numerical Model to Predict Low Temperature Aluminum Electrochemical Process Using Ionic Liquids as Electrolytes at Different Boundary Conditions;1191
143;116 Aluminum Extraction by Al–Si–Fe Alloy Electrolysis;1203
144;117 Study on High-Temperature Liquid Lithium Battery with LiI–KI Electrolyte;1214
145;118 Effects of Precursor Concentration on the Surface Morphology and Electrocatalytic Performance of Ti/IrO?–RuO?–SiO? Anode for Oxygen Evolution Reaction;1221
146;119 Electrochemical Behavior of Fe?O? in Electro-Deoxygenation in NaCl–CaCl? Molten Salt System;1232
147;120 Reduction Mechanism of Metal Cobalt from Cathode Material of Waste Lithium Cobalt Oxide Battery;1240
148;121 Review on the Bio-oxidation of Pyrite: Implications for the Mining Industry;1247
149;Part XXVII Environmental Degradation of Additively Manufactured Alloys;1253
150;122 Corrosion and Protection (Conversion Coating and Plasma Electrolytic Oxidation) of Ti?Al?V Processed by Powder Bed Fusion—Additive Manufacturing. EIS Study;1254
151;123 High Temperature Corrosion of Additively Manufactured Inconel 625;1265
152;Part XXVIII Environmentally Assisted Cracking: Theory and Practice;1275
153;124 Comparative Assessment of the Fracture Behaviour of API-5L X65 and Micro-alloyed Steels in E80 Simulated Fuel Ethanol Environment;1276
154;125 Comparison of Fracture Morphologies and Hydrogen States Present in the Vicinity of Fracture Surface Obtained by Different Methods of Evaluating Hydrogen Embrittlement of DP and TRIP Steels;1284
155;126 Crack Initiation and Propagation Analyses of Hydrogen-Related Fracture Surfaces of Tempered Martensitic Steel;1293
156;127 Determining Reliability Over Time for Stainless Steels Susceptible to Chloride-Induced Stress Corrosion Cracking;1302
157;128 Effects of Chromium and Molybdenum on Hydrogen Absorption Behavior in Iron;1313
158;129 Environmental Accelerated Deterioration Modeling of Large Glass Fiber-Reinforced Polymer Composite Structures/Systems;1322
159;130 Fracture Failure Analysis on 20MnTiB Steel High-Strength Bolt Used in Bridges;1331
160;131 Fracture Failure Analysis on 35VB Steel High-Strength Bolt Used in Bridge;1340
161;132 Role of Chloride on the Fracture Behaviour of Micro-alloyed Steel in E20 Simulated Fuel Ethanol Environment;1351
162;133 Stress Corrosion Cracking Behavior of Austenitic Stainless Steel SS304 for Dry Storage Canisters in Simulated Sea-Water;1359
163;Part XXIX Fatigue in Materials: Fundamentals, Multiscale Characterizations and Computational Modeling;1371
164;134 Assessing the Influence of Different Forging Process Parameters on the Local Fatigue Properties of a Precipitation Hardening Ferritic-Pearlitic Steel;1372
165;135 Fatigue Behavior and Analysis of Heavy Duty Riveted Steel Grating;1379
166;136 Fatigue Crack Growth Behavior in Al-7075 Under In-Plane Biaxial Loading with Mixed-Mode Overloads;1391
167;137 Review of Surface Deformation Strengthening on the Fatigue Behavior of Metal Material;1405
168;Part XXX Fracture Modeling of Composite Materials;1413
169;138 Computational Polyetheylene-Ceramic Composite Plate Design and Optimization;1414
170;139 An Improved Fracture Mechanics-Informed Multiscale Thermomechanical Damage Model for Ceramic Matrix Composites;1423
171;Part XXXI Functional Nanomaterials 2020: Translating Innovation into Pioneering Technologies;1434
172;140 Mechanical Properties of Fibers Coated by Atomic Layer Deposition for Polymer-Matrix Composites with Enhanced Thermal and Ultraviolet Resistance;1435
173;141 Novel VS? Nanorods Synthesized by a Facile Solvothermal Method for High Performance Electrochemical Capacitor Electrode;1450
174;142 Fabrication of Bilayer Nanoporous Copper from Rapidly Solidified Al??Cu?? Ribbons by Chemical Dealloying Technique;1459
175;143 Study of pH Influence in the Synthesis of Copper Nanoparticles Using Ascorbic Acid as Reducing and Stabilizing Agent;1467
176;Part XXXII High Entropy Alloys VIII;1478
177;144 An Investigation into the Link Between Microstructure and Pitting Corrosion of Novel Alloy FBB8+Ti;1479
178;145 Evaluation of Microstructural and Mechanical Properties of AlxCrFeMnNi High Entropy Alloys;1490
179;146 Fabrication and Hardness Behaviour of High Entropy Alloys;1497
180;147 Preparation of CoCrFeNi High-Entropy Alloy via Electro-Deoxidation of Metal Oxides;1508
181;148 Second Phase of 29Fe15Al18Cr27Ni High-Entropy Alloy;1517
182;Part XXXIII ICME Gap Analysis in Materials Informatics: Databases, Machine Learning, and Data-Driven Design;1528
183;149 Data-Driven Hard-Magnetic Material Selection for AC Applications by Multiple Attribute Decision Making;1529
184;150 Steel Development and Optimization Using Response Surface Models;1542
185;Part XXXIV Low-Cost Titanium: ‘Affordable Ti’;1550
186;151 Aeration Leaching Process for Producing Synthetic Rutile in a Novel Gas–Liquid–Solid Reactor;1551
187;152 Cost-Effective PM Ti Compositions and Processing;1559
188;153 Electrodeposition of Titanium Aluminide (TiAl) Alloy from AlCl?–BMIC Ionic Liquid at Low Temperature;1568
189;154 Low Temperature Synthesis Method of TiH? Powder from TiCl? Reduction with MgH?;1577
190;155 Preparation of Ti-6Al-4V Alloy Powder by Aluminothermic Reduction;1588
191;156 Deoxidation of TiAl Alloy Scraps with Metallic Yttrium and Calcium Fluoride Slag;1597
192;157 Effect of Sintering Temperature on Mechanical and Tribological Behavior of Ti–Ni Alloy for Biomedical Applications;1606
193;Part XXXV Material Behavior Characterization via Multi-directional Deformation of Sheet Metal;1616
194;158 Numerical Prediction of Ductile Fracture in Bi-Axially Stretched Sheet Metal;1617
195;Part XXXVI Materials and Chemistry for Molten Salt Systems;1623
196;159 Cathodic Behaviour of Moisture in LiCl–KCl Eutectic Melt: Applications to Pyroprocessing;1624
197;160 Characterization of LiCl–KCl Eutectic and LiCl–KCl + H?O Mixtures Using Electrochemical Impedance Spectroscopy;1633
198;161 Effect of Mn and Zn Inhibitors on the Corrosion of Incoloy 800H in the MgCl?–KCl Molten Salt;1643
199;Part XXXVII Materials Research in Reduced Gravity;1653
200;162 Effects of Bi on the Interface Layer Between Sn-Based Alloy and Cu Substrate Under Microgravity Conditions;1654
201;Part XXXVIII Microstructural Template Consisting of a Face-Centered Cubic Matrix with Ordered Precipitates: Microstructural Evolution and Properties;1661
202;163 Site Preference of the Alloying Additions on Mechanical Properties of L1? Ni?Co Alloys;1662
203;Part XXXIX Phase Stability, Phase Transformations, and Reactive Phase Formation in Electronic Materials XIX;1674
204;164 Effects of Ge/Sb Intermixing on the Local Structures and Optical Properties of GeTe–Sb?Te? Superlattice;1675
205;Part XL Phase Transformations and Microstructural Evolution;1685
206;165 In-Situ X-Ray Diffraction Measurement During Deformation of Austenite Above the Ae? Temperature;1686
207;166 Effect of Heat Treatments on Microstructures and Mechanical Properties of Ti-5553 Alloy;1696
208;167 Precipitation Kinetics and Evaluation of the Interfacial Mobility of Precipitates in an AlSi?Cu?.?Mg?.? Cast Alloy;1705
209;168 XRD and Synchrotron-Based XRD Study of Chalcopyrite Leaching Catalyzed by Silver Ions;1718
210;169 The Validity of Additivity Rule for Pearlite Transformation in Eutectoid Steels;1727
211;170 Carbon and Microstructure Effects on the Magnetic Properties of Fe–CN Soft Magnetic Materials (Minnealloy);1735
212;171 Carbonation Behavior of Calcium Aluminate Cements with Additions of Silica;1747
213;172 Dilatometric Analysis of the Martensite Decomposition by Stages During Continuous Heating;1755
214;173 Highly Enhanced Cross Tensile Strength of the Resistance Spot Welded Medium Manganese Steel by Optimized Post-heating Pulse;1765
215;Part XLI Powder Materials for Energy Applications;1775
216;174 Preparation of Zinc Carbonate Hydroxide Microparticles via Deamination Precipitation by Heating;1776
217;Part XLII Process Metallurgy and Electrochemistry of Molten Salts, Liquid Metal Batteries, and Extra-terrestrial Materials Processing: An EPD Symposium in Honor of Don Sadoway;1786
218;175 History of Inventions and Innovations for Aluminum Production;1787
219;176 Trends and Challenges for Electrowinning of Aluminium and Magnesium from Molten Salt Electrolytes;1803
220;177 Thermodynamic and Kinetic Modelling of Molten Oxide Electrolysis Cells;1815
221;Part XLIII Recent Advances in Functional Materials and 2D/3D Processing for Sensors and Electronic Applications;1825
222;178 Screen Printing to 3D Printing of Solar Cells—An Overview;1826
223;179 Formulation of UV Curable Resins Utilized in Vat Photo Polymerization for the Additive Manufacturing of Gun Propulsion Charge in 3D Printers (Update);1836
224;180 Relation Between Temperature Dependence of Gate Insulator and Magnetic Energy Effect of Thin Film Transistor Without Channel Layer;1846
225;181 Printed Flexible Sensors Functionalized with TiO? Nanowires for Room Temperature CO? Gas Sensing;1855
226;Part XLIV Recent Developments in Biological, Structural and Functional Thin Films and Coatings;1867
227;182 Advances in Dry Metal Forming Using Volatile Lubricants Injected Through Laser-Drilled Microholes;1868
228;183 A Thermoelectrically Based Approach to Reduce Adhesive Wear During Blanking;1881
229;184 Oxidation Kinetics of Palladium;1896
230;185 Characterization of Rubber Seed Oil Modified for Biolubricant Feedstock Application;1911
231;186 Development Status and Suggestions of Refractory Materials for Carbon Calcining Equipment;1922
232;187 Preparation and Uniformity Analysis of Sol–Gel TiO? Thin Films;1931
233;Part XLV Solar Cell Silicon;1938
234;188 Dislocation-Based Thermodynamic Models of V-Pits Formation and Strain Relaxation in InGaN/GaN Epilayers on Si Substrates;1939
235;Part XLVI Solid State Diffusion Bonding of Metals and Alloys;1947
236;189 Diffusion Bonding of AgC–Cu Bi-layered Electrical Contacts;1948
237;190 Effect of Hydrogen Addition on the Diffusion Bonding Behavior of Titanium Alloys;1957
238;191 Solid-State Diffusion Bonding of Glass-Metal for the International Thermonuclear Experimental Reactor (ITER) Diagnostic Windows;1964
239;192 Solid State Diffusion Bonding of ODS Eurofer Steel by Spark Plasma Sintering;1974
240;Part XLVII Ultrafine-Grained and Heterostructured Materials (UFGH XI);1982
241;193 Deformation Mechanism and Mechanical Properties of Nano/Ultrafine Grained and Heterogeneous Fe–17Cr–6Ni Austenitic Steel;1983
242;194 Effect of Severe Plastic Deformation on the Mechanical Properties of Al6061 Alloy;1991
243;195 Enhanced Mechanical Properties of Nano/Ultrafine-Grained Structure Formed by Martensite Reversion in 18Cr–8Ni Austenitic Stainless Steel;1995
244;Part XLVIII Use of Large Scale Facilities to Understand the Physical Metallurgy of Fe-based Alloys;2002
245;196 In Situ Synchrotron X-Ray Diffraction Stress Analysis During Laser Surface Line Hardening of Samples with Specific Geometric Features;2003
246;Author Index;2015
247;Subject Index;2023