Zhang / Tanaka / Yu Advanced Biomaterials VI

Erscheinungsjahr 2005
ISBN: 978-3-03813-018-5
Verlag: Trans Tech Publications
Format: PDF
Kopierschutz: 0 - No protection

E-Book, Englisch, 710 Seiten

This volume contains a selection of carefully chosen papers from the Sixth Asian Symposium on Biomedical Materials, held in Emei, Chengdu, China, from the 19th to the 22nd July 2004.Volume is indexed by Thomson Reuters CPCI-S (WoS).The conference welcomed some 300 delegates from 15 countries and areas: including the USA, Canada, Germany, France, the Netherlands, Australia, New Zealand, etc.

Autoren/Hrsg.

Zhang, Xingdong

Tanaka, Junzo

Yu, Yao Ting

Tabata, Yasuhiko

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde

Inhaltsverzeichnis

Preface
In Vivo Chondrogenesis of BMSCs at Non-Chondrogenesis Site by Co-Transplantation of BMSCs and Chondrocytes with Pluronic as Biomaterial
Use of Polyglycolic Acid Unwoven and Woven Fibers for Tendon Engineering In Vitro
Mechanical Properties and Related Histological Alterations of Engineered Tendons In Vivo
Proliferation and Differentiation of Human Stromal Cells Derived from Fat Tissue on Different Culture Substrates
A New Construction Model of Engineered Tendons under Mechanical Strain In Vitro
Enhanced Biological and Mechanical Properties of Artificial Dermis Prepared Using a Perfusion Culture System
Preparation of Porous Multi-Channeled Chitosan Conduits for Nerve Tissue Engineering
Study of Bone Marrow Derived Stem Cells and Gene Therapy for Engineering of Cardiovascular Grafts
Effect of Fibrin/Collagen Matrix on Osteogenic Differentiation of Bone Marrow Stromal Cells
A Potent Osteogenic Composite of Stem Cells – Tricalcium Phosphate Ceramic Enhanced the Posterior Spinal Fusion
Immortalization of Bone Marrow Mesenchymal Stem Cells from Inbred Pig for Regenerative Medicine
Functionalization of Biomaterials
Prefabricated Vascularized Bone Graft Using Autologous Tissue, Biomaterials, and Growth Factors: A New Technique for Bone Reconstruction
Vascular Tissue Regeneration of the Hybrid ePTFE Graft for Adult Patients
Biodegradable Polymer Scaffold for Tissue Engineering
Experimental Study of Partially Demineralized Bone Matrix as Bone Tissue Engineering Scaffold
Fabrication of Tissue Engineering Scaffolds via Multi-Jet and Component Alternate Electrospinning
Poly-N-Acetyl Glucosamine as a Scaffold for Cartilage Tissue Engineering in Nude Mice
Biomimetic Synthesis of Apatite - Polyelectrolyte Complex (Chitosan - Phosphorylated Chitosan) Hydrogel as an Osteoblast Carrier
Tissue Engineered Bone Formation with Polymer/Ceramic Composites by Press-and-Baking Method
Poly-N-Acetyl Glucosamine-SO4 for Repairing Osteochondral Defect in Rabbits
Study on Poly(ß-Hydroxybutyrate-Co-ß-Hydroxyvalerate)/Bioglass Composites as Scaffold for Tissue Engineering

Chitosan-Based Scaffolds for Hepatocyte Culture
Chitosan Derivatives as Gene Carriers
Construction of Biodegradable Multilayer Films via Layer-by-Layer Self-Assembly as Gene Delivery System
Anti-DNA Antibody/Cationic Lipid Micelles for Plasmid DNA Gene Delivery
Tumor Targeting of Plasmid DNA by Dextran Conjugation Based on Metal Coordination
Preparation of DNA Hybrid Polyethersulfone Microspheres for Endocrine Disruptor Removal
Injectable Supramolecular Hydrogels Self-Assembled by Polymers and Cyclodextrins for Controlled Drug Delivery
Controlled Release Technology Suppresses the Progression of Disseminated Pancreatic Cancer Cells
An Implantable Immunosuppressive Cyclosporine Drug Delivery System
Enzyme-Resistant Starch for Oral Colon-Targeting Drug Delivery System
Promoted Growth of Murine Hair Follicles by Controlled Release of Growth Factors from Biodegradable Hydrogel
Preparation of Electrospun PLA Nanofiber Scaffold and the Evaluation In Vitro
A New Type Gene Delivery System – Gene Nanoparticles
Preparation and Evaluation of 5-FU/PLGA/Gene Nanoparticles
Formulation and Characterization of Poly-D, L-Lactic Acid Nanoparticles Containing Daunorubicin
Confocal Study of Specific Targeting of Quantum Dot Nanocomposites to Cancer Cells
Spherical Porous Microparticle of Hydroxyapatite/Polysaccharides Nanocomposites
A Study on PELGE Nanoparticles as Controlled Drug Delivery Systems for Intravenous
The Oriented Growth of C6 Cells on Nanogrooved Surfaces
In Vitro Bioactivity of Composite of Nanophase Titania/Bioactive Glass-Ceramic in Simulated Body Fluid

High-Pressure and -Temperature Sintering of Nanosized Hydroxyapatite Powders
Preparation of Bioactive Nanoparticles in the System CaO-P2O5-SiO2 Using Microemulsions
Electrophoretic Deposition of Hydroxyapatite Nano Coating on Etched Titanium Surface
Nanostructure Properties of Hydroxyapatite Nanobelts Prepared by Oil-in-Water Emulsion

Preparation of Hydroxyapatite-Fibroin Nanocomposites
In Vitro and In Vivo Biocompatibility of Nano-Hydroxyapatite/Collagen Composites
Manufacturing Porous Blocks of Nano-Composite of Needle-Like Hydroxyapatite Crystallites and Chitin for Tissue Engineering

Preparation of Nano-Hydroxyapatite/Poly(D,L-Lactide) Composite and Its Degradation in Femora of Rabbits
In Vitro Behaviors of Copolymer of Poly (1,4-Phenylene Sulfide-2, 4-Phenylene Sulfide Acid) and Its Nano Hydroxyapatite Composites

Preparation of Chitosan/Hydroxyapatite Nanocomposite with Layered Structure via In Situ Compositing
Preparation of Bioactive Nanophase Titania Ceramics by Alkali-Heat Treatment

Electrochemical Preparation of Ordered Nano HAp Coatings on Ti Substrate and In Vitro Study on Its Bioactivity

Cytocompatibility Testing of Hydroxyapatite/Collagen Composite Cross-Linked with Glutaraldehyde
Molecular Modification of Hydroxyapatite to Introduce Interfacial Bonding with Poly (Lactic Acid) in Biodegradable Composites

Mechanical Behavior of PLA/HA Composite in Simulated Physiological Environment

The Long Term Study of HA/TCP Biphasic Ceramics' Osteoinduction
The Influences of ß-Glucan Associated with BMP-7 on MC3T3-E1 Proliferation and Osteogenic Differentiation
Successful Osteoinduction by Cell-Macroporous Biphasic HA-TCP Ceramic Matrix
A Simple but Effective Demineralizing Method for Osteogenic Allograft Preparation
Bone Induction by Controlled Release of BMP-2 from a Biodegradable Hydrogel in Various Animal Species - From Mouse to Non-Human Primate -
Fibrin-Reinforced Collagen Matrix Enhances Tissue Regeneration and Angiogenesis
The Study of Collagen-HA Composite with Incorporated BMP as Bone Tissue Engineering Scaffold
Gene Expression of C2C12 Cells on Calcium Phosphate Ceramic In Vitro
Evaluation of Gamma Irradiated Human Bone in Nude Rats
Influence of Dynamic Flow Speed on Bonelike Apatite Formation in Porous Calcium Phosphate Ceramic in RSBF

Nucleation and Growth of Bone-Like Apatite on Surfaces of Metals, Ceramics and Polymers in Simulated Body Fluids

Experimental Study on the Osteoinduction of Calcium Phosphate Biomaterials In Vivo and the Capability of Supporting Osteoblast Proliferation In Vitro
Influence of Characteristics of Titanium Oxide Film on the Biological Behavior of Cultured Human Umbilical Vein Endothelial Cells (Huvec)
Attachment and Proliferation of Human Dermal Fibroblasts onto ECM-Immobilized PLGA Films
Surface Modification for Controlling the Blood-Materials Interface
Structure and Hemocompatibility of Titanium Oxide Films Synthesized by Continuous or Pulsed DC Magnetron Sputtering
Immobilization of Albumin and Heparin on the Surface of Ti-O Films for Improving Blood Compatibility
Iridium Oxide as a Stimulating Neural Electrode Formed by Reactive Magnetron Sputtering
The Role of Surface Physical Properties on Blood Compatibility of Titanium Oxide Films Synthesized by Unbalanced Magnetron Sputtering
Surface Modification of Titanium Implant and In Vitro Biocompatibility Evaluation
Bioactivity of Plasma-Sprayed Diopside Coating In Vitro
Platelet Adhesion Study and Characteristic of Hydrogenated Carbon Films Synthesized by PIII-D
Blood Compatibility of Chitosan Immobilized on Poly(Ethylene Terephthalate) Surface Modified by Plasma and Ultraviolet Grafting
Surface Characterization and Antibacterial Evaluation of Poly(Ethylene Terephthalate) Modified by Chitosan-Immobilization
Nitrogen Plasma Source Ion Implantation (PSII) for Improvement of Blood-Compatibility of Silicon
Hemocompatibility of PET (Polyethylene Terephthalate) Films Grafted PEG (Polyethylene Glycol) by Plasma Surface Modification
Glucosamine Coating for Inhibiting Bacterial Adhesion to Titanium Surfaces
Physico-Chemical Modifications and Biological Improvements of Biomedical PET as a Consequence of Excimer LASER Irradiation
Effect of Rare Earth Y2O3 Content on Microstructure of Gradient Bioceramic Composite Coating Produced by Wide-Band Laser Cladding

The Mechanical Behavior of Water Vapor-Treated HA Coating Produced by Plasma Spraying Technique

Comparison in In Vitro Evaluation of Wollastonite and Dicalcium Silicate Coatings

The Effect of Bovine Serum Albumin on the Crystalline Characteristics of the CaP Biomimetic Coating
Smooth Muscle Cell Ingrowth of a Surface-Modified ePTFE Vascular Graft

PEG-Containing Polymeric Films and Gels as Postoperative Tissue Adhesion Barriers
Preparation and Characterization of Collagen by Hydrogel Formation Method
Preparation of Porous Poly (L-Lactic Acid) (PLLA) Scaffold by Porogen Leaching and Freeze Drying
Fabrication and Characterization of Mechanically Reinforced Collagen Sponge
Corneal Implantation with Collagen-Copolymer Matrices
In Vitro and In Vivo Evaluation of Amino Acid-Functionalized Cellulose Beads for Whole Blood Hemoperfusion
In Vitro Degradation of Medical Polyacrylamide Hydrogel I.Oxidation
Biological Behaviors of Keratinocytes Cultured on Chitosan-Gelatin Membrane
Determination of Residual Acrylamide Monomer in Medical Polyacrylamide Hydrogel by HPLC-SPE
Osteoblast Differentiation and Apatite Formation on Gamma-Irradiated PLLA Sheets
Removed due to copyright infringements.
The Antithrombogenecity of Silk Fibroin Films Blending with Citric Acid and PVA
Surface Characterization and In Vitro Blood Compatibility of Poly(Ethylene Terephthalate) Immobilized with Hirudin
Evaluation of Poly(Lactic-Co-Glycolic Acid) (65/35) Treated by Dielectric Barrier Discharge in Atmospheric Pressure
Biomimetic Mineralization and Bioactivity of Phosphorylated Chitosan

Round-Hole-Fiber Distribution in Hydrophilidae Cuticle and Biomimetic Research
Application of Microbial Polyesters-Polyhydroxyalkanoates as Tissue Engineering Materials
Preparation of Gelatin Grafted with Lactic Acid Oligomers
Mechanical Properties and Antithrombogenecity of Blend Membrane of Silk Fibroin
Two-Dimensional Array Formation of Multi-Cellular Spheroids on Micro-Patterned Polymer Brush Surface
Heparinized Tissue Matrices as Novel Biomaterials
Synthesis and Antithrombogenicity Assessment of Tetramethylpyrazine-Capped Poly(Ethylene Glycol)
Novel Prosthesis Using Silk Fibroin for Small Caliber Vascular

Biomimetic Amphiphiles for Polymeric Micellar Carrier System

Biodegradable Polyamides Containing Amino Acid Residues: A Chemoenzymatic Synthesis

Preparation and Characterization of Three Dimensions Chitosan Rods with Biomimetic Layered Structure Similar to Annual Ring

Radiation-Induced Graft Polymerization of Maleic Anhydride onto Poly-ß-Hydroxybutyrate

The Influence of Different Base Materials on Marginal Adaptation of Direct Class II Composite Resin Restorations
Synthesis and Biocompatibility Evaluation of Poly(HEMA-Co-MMA) Orbital Implant
Temporal and Spatial Expression Pattern of VEGF and VEGF Receptor in the Posterior Spinal Fusion with Allograft
New Method for Evaluating Material Blood Compatibility Using Microchannel Array
A New Cellular Model for In Vitro Biocompatibility Evaluation of Microcapsule Materials
Computer-Assisted Image Processing Techniques for Quantitative Analysis of Cell Migrations on Collagen-Coated Glass
Cytokine Expression of Cultured Human Endothelial Cells Exposed to Biomaterials
A Novel Method for Evaluating Compatibility of Hepatocytes with some Kinds of Biomaterials
Research on Platelet Adsorption Behavior Using Enzyme Immunoassays and LDH Testing
Hydrothermal Preparation of Porous Hydroxyapatite with Tailored Crystal Surface
Single Crystal Growth and Structure Analysis of AB-Type Carbonate Apatite
Fabrication of Porous Hydroxyapatite Ceramics by Microwave Sintering Method
Fabrication of Apatite Monolith from Calcium Sulphate
Preparation and Characterization of Strontium-Containing HAP Sol and Studies on Its Effects on Cancer and Normal Cells

In Vitro Dissolution Behavior of Gel-Derived Bioactive Glasses in the SiO2-CaO-P2O5-MgO System

The Study of a New Injectable Root Canal Filling Material
Effect of Macrophage on Degradation of ß-TCP Ceramics
In Vitro Degradation Studies of Calcium Polyphosphate Ceramics Prepared by Controlled Degree of Polymerization and Crystallization

Rheological Properties and Injectability of a Calcium Phosphate Bone Substitute Material
From Dental Enamel to Synthetic Hydroxyapaptite-Metal Composites
Macroporous Hydroxyapatite Scaffold Fabricated by Foam Impregnation
Finite Element Analysis of a Stent Implantation in a Stenosed Artery
A Dissolvable Intralumental Stent for Sutureless Vascular Anastomasis
Heating NiTi Stent in Magnetic Fields and the Thermal Effect on Smooth Muscle Cells
Control Release of Paclitexel-Coated 316L Cardiovascular Stent In Vitro
The Studies on Biocompatibility of Self-Expanding NiTi Stent and Apoptosis of Smooth Muscle Cells after Stenting
Fabrication of Fully-Porous and Porous-Surfaced Ti-6Al-4V Implants by Electro-Discharge-Sintering of Spherical Ti-6Al-4V Powders and Their Osseointegration Ability
Investigation on Mechanical Compatibility Matching for Biomedical Titanium Alloys
Bioactive NiTi Implants Used for Bone Repairing Applications
Torsion Property and Cyclic Fatigue Fracture Behavior of Nickel-Titanium Endodontic Instruments
Fretting Damage of Human Cortical Bone in Transverse Orientation against Titanium

Fabrication of Porous Titanium with Biomechanical Compatibility
The Influence of Albumin on the Electrochemical Behaviour of Commercial Titanium
Novel Techniques of Titanium Surface Patterning
Wear of UHMWPE against Zirconia/Alumina Composite
Tribological Properties of UHMWPE Composites Filled with Nano-Powder of SiO2 Sliding against Ti-6Al-4V
Physico-Chemical and Biological Evaluations of Biomedical Polyethylene after YAG-LASER Irradiation
The Friction and Wear Behaviors of Dental Porcelains with Different Surface Strengthening Techniques
Improving Wear Resistance by Heat-Treatment in Different Atmospheres
Wear of Resin Composites Polymerized by Conventional Halogen Light Curing and Light Emitting Diodes Curing Units
Study on Bio-Tribological Properties of Nitrogen Ion Implanted UHMWPE
3D Finite Element Analysis of Bone Stress around Distally Osteointegrated Implant for Artificial Limb Attachment
Preliminary Evaluation of a New Dental Implant Design with Finite Element Analysis

Refolding and Purification of rhBMP-2 Expressed as Inclusion Bodies in E.COLI with Hydroxyapatite Chromatography
Protection of Human Fibroblasts from Reactive Oxygen Species by Green Tea Polyphenolic Compounds
Periodic Structure of Blaze Grating in Abalone Shell

Research on the Parallel Arrangement of Aragonite Sheets in Clam's Shell
Polyurethane Foam with a Negative Poisson's Ratio for Diabetic Shoes