Zhou / Tu / Xie Progresses in Fracture and Strength of Materials and Structures

Erscheinungsjahr 2007
ISBN: 978-3-03813-135-9
Verlag: Trans Tech Publications
Format: PDF
Kopierschutz: 0 - No protection

E-Book, Englisch, 3240 Seiten

Volume is indexed by Thomson Reuters CPCI-S (WoS).The collection coveres all aspects of fracture and strength of materials and structure, particularly of advanced materials ranging from nanoscale to macroscale and modern structural systems ranging from large scale plants to micro- devices.

Autoren/Hrsg.

Zhou, Yu

Tu, Shan Tung

Xie, Xi Shan

Fachgebiete

• Technische Wissenschaften Maschinenbau | Werkstoffkunde Technische Mechanik | Werkstoffkunde

Inhaltsverzeichnis

Interface Strength of Low-Dimensional Nano-Components
Metal Working and Dislocation Structures
Section 1: Fatigue and Fracture
Shape Prediction of Fatigue Crack Based on a Given Stress Intensity Factor Distribution
Fatigue Damage Accumulation of Welded Bridge Member during Crack Growth Propagation with Initial Crack
Physical Models for Cleavage Fracture at Various Temperatures
Study on Fracture Mechanisms of TiAl Alloys by In Situ Tensile Tests
Dynamic Analysis of Antiplane Crack under SH-Waves in the Functionally Graded Materials
Mode III Yoffe Dynamic Crack Problem on the Interface between Dissimilar Materials
Morphology Evolutions of the Short Fatigue Crack Propagation of 1Cr18Ni9Ti Weld Metal
The Grain Size and Porosity Dependent Constitutive Modeling for Nanocrystalline Ceramics with Small Plastic Deformation
Study on Impact Fatigue Life of 42CrMo Steel with M+F Dual-Phase Structure
Thermal Shock Properties of Ternary-Boride-Based Cladding Material
Fatigue Reliability Research on RD2 Axle of Railway Freight Car
Reconstruction of the Material Probabilistic S-N Relations with Given Confidence
Study on Complete Stress-Strain Experiment and Destruction Characteristics of Rock under Lower Confining Pressure
Three-Dimensional Elastic Stress Fields of Finite Thickness Plates with Elliptical Hole
Failure Analysis of Outer Swirls in the Fuel Nozzle
A New Model of Stochastic Crack Growth under Random Loading and Reliability Analysis of Fatigue Life
An Effective Energy Criterion on Fatigue Crack Growth of Metal Materials
The Evaluation of Fretting Fatigue Behavior in Room Temperature for INCOLOY Alloy 800
Effect of High Tensile Pre-Strain on the Torsional Fatigue Properties of a Structural Steel
Failure Assessment Diagrams of Semi-Elliptical Surface Crack with Constraint Effect
Contact Damage and Strength Degradation in Nitrided Pressureless Sintered (NPS) Silicon Nitrided Ceramics
The Variation of Crack Energy Density (CED) on Creep Crack Growth
Dynamic Fracture Behavior of Magnesium Alloy
Fatigue Properties of Nanometer-Scale Copper Films
High Speed Fracture Phenomena in Dyneema Composite
Fatigue Properties of Ni-Base Superalloy in Long Life Region
Assessment of Fatigue Life for High-Temperature Pipeline Welds Using X-Ray Diffraction Technique
Effect of Contact Pressure and Cyclic Stress Amplitude on Fretting Fatigue of 45-Carbon Steel
Room Temperature Creep and its Effect on Fatigue Crack Growth in a X70 Steel with Various Microstructures
A Study on Fatigue Behavior of SM490A Steel under Low Temperature
Plastic-Factor for the Fracture Toughness Test of the SA508Cl.1a Narrow-Gap Welding Part
Fatigue Life Estimation of Leakage for Excitation and Internal Pressure in Brazed Joints
Fatigue Crack Propagation Behavior Near Fusion Line between SA508 Steel and Ni-Based Buttering Metal
Growth Pattern Study of Closed Surface Flaw under Compression
Improvement of Fatigue Strength of Stainless Steel by Using a Cavitating Jet with an Associated Water Jet in Water
The Effect of Different Material Parameter Functions in Non-Homogeneous Regions on Eigen-Functions of Crack Tip Fields
Effect of Mean Stress on Fatigue Strength of Non-Combustible Magnesium Alloy
Influence of Testing Frequency on Fatigue Crack Growth of 6061-T6 Aluminum Alloy in Hydrogen Gas Environment
Fatigue Characteristics of Vulcanized Natural Rubber for Automotive Engine Mounting
Fracture Mechanics in Design Guidance and Practice
Effect of Water Height for Modal Characteristics of the Fuel Channel and Stiffness Analysis Using Modal Test Results
Study on Life Prediction Method for Creep-Fatigue Interaction at Elevated Temperature
The Fatigue Life Prediction of Multidirectional Laminated Composites
Effect of Shot Strip Interval and Shot Times on Laser Shot Peen-Forming with Repetition Laser Pulse
Isothermal LCF Behaviors of a NiCrAlYSi Coated Columnar-Grained Directionally Solidified Nickel Base Superalloy
Fatigue Property for the Powder Metallurgy Beryllium-Aluminum Composite Materials
Tearing Energy for Crack Growth at the Bonds of Cylindrical Rubber Bushes Subjected to Axial Shear
The Effect of Hybrid Surface Modification; Combination of Fine Particle Bombardment Treatment and Nitriding, on Fatigue Properties of Steel
Characteristics and Mechanism of High pH Stress Corrosion Cracking of Pipeline Steel X70
Stress Corrosion Cracking of Pipeline Steel in Soil Environments of Eastern China
Influence of Loading Frequency on Fatigue Behavior of High Strength Steel
A Crack in an Electrode Layer between Two Dissimilar Piezoelectric Materials
Investigations on Fatigue Properties of Die Cast Magnesium Alloy AZ91HP at Very High Cycles
An Experimental Investigation of Interface Fracture Characteristic of APS Thermal Barrier Coating System under Bending at 1000 °C
Fatigue Properties of Austenitic Stainless Steel with Circumferential Notch
Ductile Crack Propagation Characteristics in Thin Steel Tubes
Experimental Study of the Effects of Surface Defects on Rolling Contact Fatigue Behavior
The Non-Local Theory Solution of a Crack in the Functionally Graded Piezoelectric Materials Subjected to the Harmonic Anti-Plane Shear Stress Waves
Crack Problem for a Functionally Graded Orthotropic Coating-Substrate Structure
Influence of Plasma Radical Nitriding on Fatigue Properties of SCM435 Steel
Effect of Physical Property of Water on SCC Growth Rate of 316L Stainless Steels in High-Temperature Water
Influence of Deposition Bias Voltage on Fatigue Cracking Behavior of Chromium Nitride Film Deposited on Steel
The Relation of the Interlaminar Fracture Toughness and the Acoustic Emission (Ae) under the Enf Test
Fatigue Lives of a Ferritic Stainless Steel Containing Deformation Twins
Shear-Type Fatigue Crack Growth in SAE52100 Steel
Effect of Extrusion Ratio on Fatigue Properties of Hot-Extruded Magnesium Alloys
Effects of Microstructures on Strength and Fatigue Properties of Long-Term-Serviced F12 Steels
Fatigue Properties of Surface-Micromachined Al-3%Ti Thin Films
Life Evaluation of a Disk Brake of Railway Vehicles Considering Pressure Distributions at a Frictional Surface
Crack Formation of Ceramic Thin Film on Polymer Substrate
Investigation of Mechanical Stability of Thermally Aged a-c:H DLC Films with Different Precursor Gases
Thermal Fatigue Properties of the Fin in the Boilers
Distributions of a' Martensitic Phase Transformed on Fracture Surfaces of SUS 304 Stainless Steel Having Through- and Part-Through-Thickness Fatigue Cracks
An Analysis of the Fatigue Strength of Metals Containing Small Defects
Study on the Effect of Cl- Concentration on the Corrosion Fatigue Damage in a Rolled AZ31B Magnesium Alloy by Acoustic Emission
The Method to Determine the Expression for Fatigue Curves
Effect of Fusing Treatment on Fatigue Strength of Thermally Sprayed Steels with Co-Based Self-Fluxing Alloy Coating
Section 2: Strength / Hardening and Toughening
Pure Bending Testing of Cr-Mo Alloy in Metal Dusting Condition
Bending Strength of Al2O3 Ceramics for Textiles Machinery and Elastic Wave Characteristics by Wavelet Analysis
Study on Strengthening of the Solid Contact Alloy CuW80/Cu
Analyzing the Microstructure and Tensile Properties of an Al8Si0.35Mg Cast Alloy with Prolonged Aging
Effect of Solution Treatment Temperature on Properties of an Al11Si3Cu0.35Mg Cast Alloy
Theoretical Analysis and Experimental Research on the Braced Stress of Vacuum Glazing
Young’s Modulus of In Situ TiB Whiskers in Ti Metal Matrix Composites
Generalized Drucker-Prager Strength Criteria
Separation of Primary Stress in Finite Element Analysis of Pressure Vessel with the Principle of Superposition
A Proposed Thickness Distribution of Elbow Resisting Ratcheting
Study on the Strength of Jointed Rock Mass
Effects of Chemical Compositions of the Submerged Arc Welding Wires on Impact Toughness of the Weld Metals for the Pipeline Steel
Stress Distribution of the Composites Reinforced by Slub-Like Short Fibers
Strength and Toughness of 1.1wt% Li-Containing Al-Zn-Mg-Cu Alloys
Experimental Studies of Non-Equilibrium Grain-Boundary Segregations of Phosphorus under Low Tensile Stresses
Influence of Residual Stresses on the Interfacial Toughness Measurement by Cross-Sectional Nanoindentation
Micorstructure and Properties of 2Cr16Ni2MoN Stainless Steel
Stress Relaxation Testing For Analysis of 12Cr1MoVG Steel for Creep Strength Evaluation
Compressive Deformation Behavior of the Ferritic Oxide Dispersion Strengthened Alloys at Elevated Temperatures
Evaluation of Critical Fracture Stress in Low Alloy Steels by Finite Element Analysis of Small Punch Test
Empirical Correlation between Parameters from Small Punch and Tensile Curves of Mn-Mo-Ni Low Alloy Steels by Using Test and FE Analysis
Structural Strength and Buckling Analysis for a Steel Derrick after its Members Removed Partly
Strengthening of Cu-Ti2SnC Composites due to Microstructural Changes in the Material
Impact Toughness of Titanium Alloys with Different Strengthening Methods
Strength Calculation of the Screw Conveyor of a Decanter Centrifuge under Normal Operation Conditions
The Effect of Heat Treatment on the Properties of LF9 Alloy
Section 3: High Temperature Materials and Strength
Creep Behavior of Functionally Graded Material under In-Plane Bending Moment
Experimental Study on Residual Stress of K24 Superalloy in Laser Cladding Zone by Laser Shock Processing
Effect of Tungsten Addition on Properties of Ni-Based Alloy Sheet Prepared by EB-PVD
Influence of Oxidation to Small Punch Creep Test
Tensile Properties and Fracture Characteristics of Spray Deposited Ni3Al-Based Superalloy(IC6)
Compressive Properties of Quartzite Microcrystallite Glass Ceramics
Finite Element Study of Factor Effects on Residual Stresses and Thermal Deformation of Brazed Plate-Fin Structure
Research on Physical Significance of the Larson-Miller Parameter and its Electron Theory for Heat-Resistant Steels
Microstructure and Tensile Properties of Oxide Dispersion Strengthened Molybdenum Alloys Prepared by Different Doping Process
Crack Growth in Stainless Steel 304 under Creep-Fatigue Loading
Effect of Microstructure on Thermo-Mechanical and Isothermal Low Cycle Fatigue Failures of a Single Crystal Ni-Base Superalloy
Residual Stress Characteristics of Plasma Sprayed CoNiCrAlY Coatings by X-Ray Diffraction
The Study on Failure Behavior and Low Cycle Fatigue Life of Hot Gas Casing for Gas Turbine
Microstructure and Strength of Oxidation-Bonded Porous Silicon Nitride Ceramics
Microstructure and High Temperature Stress Rupture Properties of Ru-Containing Directionally Solidified Ni-Base Superalloy
Microstructural Evolution during Tensile Creep of a Single-Crystal Nickel-Base Superalloy
Effect of Original Microstructure on the Hot Compression B