Development and Characterization of a Dispersion-Encoded Method for Low-Coherence Interferometry

1. Auflage 2022
ISBN: 978-3-658-35925-6
Verlag: Springer

Buch, Englisch, 163 Seiten, Paperback, Format (B × H): 148 mm x 210 mm, Gewicht: 251 g

Reihe: Research

This Open Access book discusses an extension to low-coherence interferometry by dispersion-encoding. The approach is theoretically designed and implemented for applications such as surface profilometry, polymeric cross-linking estimation and the determination of thin-film layer thicknesses. During a characterization, it was shown that an axial measurement range of 79.91 µm with an axial resolution of 0.1 nm is achievable. Simultaneously, profiles of up to 1.5 mm in length were obtained in a scan-free manner. This marked a significant improvement in relation to the state-of-the-art in terms of dynamic range. Also, the axial and lateral measurement range were decoupled partially while functional parameters such as surface roughness were estimated. The characterization of the degree of polymeric cross-linking was performed as a function of the refractive index. It was acquired in a spatially-resolved manner with a resolution of 3.36 x 10-5. This was achieved by the developmentof a novel mathematical analysis approach.

Zielgruppe

Research

Autoren/Hrsg.

Taudt, Christopher

Fachgebiete

• Technische Wissenschaften Technik Allgemein Technische Optik, Lasertechnologie
• Technische Wissenschaften Technik Allgemein Mess- und Automatisierungstechnik
• Naturwissenschaften Physik Elektromagnetismus Quantenoptik, Nichtlineare Optik, Laserphysik

Inhaltsverzeichnis

1 Introduction and motivation.- 2 Related works and basic considerations.- 3 Surface profilometry.- 4 Polymer characterization.- 5 Thin-film characterization.- 6 Conclusion.

Über Autor(innen)

Christopher Taudt holds a diploma degree in Mechanical Engineering of the WH Zwickau. During a stay at the IT Sligo, Ireland, he earned a Bachelor Degree in Mechanical Engineering. After his studies, Christopher Taudt has worked on research projects in optical metrology and earned a PhD in optical metrology from the TU Dresden.